really nice build and great video do you have any video when running it?
@thomasinnis2370
9 ай бұрын
What's it doing now?
@KobusLR
Жыл бұрын
Well-done!! This was a legit mod. Doing mine soon
@joel387ktm
2 жыл бұрын
Unreal build amazing job
@frankdieber7090
2 жыл бұрын
Nice work!
@calleschon767
2 жыл бұрын
hi love your video! i just curies what you use for enigen and if you have tested in water?
@jesski
2 жыл бұрын
Yamaha 701. Ridden it a few times havent made the unveiling video yet but its coming! Stay tuned!
@jonathonlago2889
3 жыл бұрын
Hey mate I was just wondering whether you use glass
@jesski
2 жыл бұрын
Yup fiberglass and epoxy resin
@jonathonlago2889
3 жыл бұрын
Hi mate I was just wondering I’ve got a square nose and I’m gonna do the same as what you done to yours I like it so much you wouldn’t be able to give me a call Mate I just don’t want to put my phone number up there how can we do it but
@jesski
3 жыл бұрын
Not much more i could tell ya thats not in the video. Just look into how to fiberglass and make sure to use some good epoxy resin. Thin glass sheets are easier to work with just do a couple more layers. Its mostly trial and error just dont be scared and get into it man you’ll learn alot!
@55weedlover
3 жыл бұрын
Sick build! Hardly looks like a SJ anymore haha
@thebluepill1496
3 жыл бұрын
Thankyou for sharing the "Pie Cut", technique.
@trentonbriones2381
3 жыл бұрын
Can we see it running and driving
@jesski
2 жыл бұрын
Havent made the time but the review video is coming!
@PFArecycling92
3 жыл бұрын
Sweet build
@Andingo86
3 жыл бұрын
Damn that was sexy, thank you so much!!
@ArtorMachine
3 жыл бұрын
Sweet jet ski!
@jeffbryner5355
4 жыл бұрын
That is bad ass man! Doesnt even look like a sn!! I'm curious where does the exhaust exit at since u widen the tray?
@jesski
4 жыл бұрын
Same spot just glassed back over the tray
@jeffbryner5355
4 жыл бұрын
@@jesski oh ok. Looks good man. Great job
@rowdytillwedie
4 жыл бұрын
Your an artist man wow !!! Amazing work
@ashtonspearing90
4 жыл бұрын
Can you please make a video of you driving it please?
@jesski
4 жыл бұрын
Yes! I need to but i have the motor torn down for a rebuild at the moment
@ashtonspearing90
4 жыл бұрын
Oh ok thanks hope to see you jumping it!!
@fredmorris2972
4 жыл бұрын
Wicked build need to put a vid of it on the water up 👍
@jesski
4 жыл бұрын
I know i need to i have the motor torn back down right now rebuilding it but i will as soon as i get it up and running again!
@dirtrider88
4 жыл бұрын
@@jesski i would love to see a video of it in the water. i cant be the only one
@camdenbennett5831
4 жыл бұрын
Any idea on the weight of the hull? I got a DASA 1100cc with a 158mm pump, I’m planning to drop into something going for a flat water ski
@jesski
4 жыл бұрын
Not sure the exact weight but i can pick it up over my head pretty easy without a motor😂 id guess around 60lbs give or take 20
@landyachtdually
4 жыл бұрын
My build is super similar but I havent relocated the pole yet (my xscream pole hasnt shown up yet). Did you find 6 inches forward was too much orrrrr? I run a -3 pole with OVP on my current hull and am scared relocating forward would be too much
@jesski
4 жыл бұрын
Cole Prince 6” was about perfect for me i like it further forward to compensate for cutting so much off the back, it helps it not ride so nose high
@landyachtdually
4 жыл бұрын
@@jesski thanks for the reply man! My pole comes Monday so I will mock it up then. I'm thinking that because I'm ovp and the pole is a minimum of -3 that I'll just move the bracket 2-4 inches forward. I'm -3.5 off the back of the hull as well
@tylermartin913
4 жыл бұрын
How did you do the try? Did you just shape the original and add glass? And how sturdy is it? I’ve had some ideas of ways to made it more sturdy and was just curious how yours feels.
@jesski
4 жыл бұрын
I gutted all the old foam out because it was old and full of water, then made the shape out of thin sheets of foam and glassed over it then used pour foam to fill the rest of the tray.. its super sturdy but it was by far the hardest part of the build
@tylermartin913
4 жыл бұрын
How has it held up? Thinking of doing this I have two square nose superjet hulls I’m thinking about trying it out on one of them. Sweet build tho I’d like to communicate and get some tips.
@jesski
4 жыл бұрын
Its been killer, rides alot better for the surf the nose is alot higher. As far as durability i havent had anything happen to it yet.. im sure itll happen eventually but shes pretty sturdy
@tylermartin913
4 жыл бұрын
Sweet man, how does it handle on flat water? I mainly do lake rides with wake boat wakes and I’m able to do barrels rolls on my remotely stock super jet but I’m just trying to build something a little more suited for that.
@trentonbriones2381
4 жыл бұрын
How did u fuel it up and did u use a water box . I really want to do this with my square nose superjet. Even tho I’m scared I never fiberglassed a ski in my life but I want to learn.
@jesski
4 жыл бұрын
Trenton Briones i moved the gas cap on top of the tank inside to fuel. And yes it has an aftermarket waterbox.. this was pretty much my first time doing fiberglass, just do your homework and get the right stuff and youll be fine. Its easier than you think. Just very time consuming
@trentonbriones2381
4 жыл бұрын
What pole did U use? Great build 👍🏾
@jesski
4 жыл бұрын
Trenton Briones I believe its the x scream adjustable pole
@jesski
4 жыл бұрын
David it is my ski I built it but i got the pole from a parts ski i got and theres no logos on it so im not sure 100% if its the x scream.. you seem like a really great guy, would probably be an even better guy if you got off the internet and went and lost your virginity.
@robsonardais9044
4 жыл бұрын
Faz um vídeo. Andando nele. E as medidas como ficou. Toptop
@crashcourse3155
4 жыл бұрын
best idea ever with the front end to rocker it
@JetSkiJarrod
4 жыл бұрын
I love the paint splatter in the engine bay. Nice work man!
@benellis5058
4 жыл бұрын
What footholds have you got in this, im tempted to start cutting mine up
@jesski
4 жыл бұрын
Ben Ellis just running foot straps, not a fan of footholds in the surf
@dirtrider88
4 жыл бұрын
@@jesski why is that?
@fvgc454ss
5 жыл бұрын
What is that paint color???! Looks awesome
@jesski
5 жыл бұрын
fvgc454ss sublime green!
@tylerholstege
5 жыл бұрын
What engine you got in her?
@jesski
5 жыл бұрын
Tyler Holstege 701 Yamaha
@tylerholstege
5 жыл бұрын
h2oholics have you taken it out? Will it flip? What gas tank you running?
@jesski
5 жыл бұрын
Tyler Holstege just a stock superjet tank.. wont flip flatwater, itll flip in the surf tho.. anything can flip in the surf tho.
@shanehasemann7503
5 жыл бұрын
Looks awesome man! I have an fx1 I painted over winter but didn't have the balls to cut into it lol. Gonna try it on a 300sx though this winter
@jesski
5 жыл бұрын
Yeah man a 300 would be rad if you chop it and drop a 750 in it! Would make a good freestyle ski
@shanehasemann7503
5 жыл бұрын
@@jesski yeah that's what I've read. Going to try a 701 though. Not too much info out there on it lol
@willkelley7747
2 жыл бұрын
@@jesski wish there was a video of the ski ripping getting ready to do the build based on ur video
Пікірлер