I had no experience doing anything like this, but your video was so helpful that I was able to do it! I got a $15 soldering iron and now it works!!! Thank you so so much!
@Ericsaidful
2 ай бұрын
So what do you do? I don’t know what “shut it” means. Do you just solder those two pins together or do you remember the solder?
@anakjulok7568
2 ай бұрын
My bad English. I mean "to short it". Yes solder the pins together.
@sovietbiscuit9918
4 ай бұрын
I’ve had this issue since I got it and could not figure out what was wrong with it, thank you so much
@aaronswenson5349
5 ай бұрын
Bro five minutes and fixed my problem, thank you!
@sasstewart1222
9 ай бұрын
Great video thank you. I ended up fixing my 2008 cx9 by getting another aux unit on ebay for $39. Easy swap
@user-vg6sy2ll6r
10 ай бұрын
This works great thank you very much for sharing
@JeffreyMadison-wb9yi
Жыл бұрын
Thank you! This worked on my Mazda 2009 w a modification. Shorting the 1st and 2nd lead alone didn't work, I also had to short the 4th and 5th leads. 🙏🏼
@MarryJane-uo1df
8 ай бұрын
are you talking about the actual numbers labeled on the chip?
@NatandCash
Жыл бұрын
The best video on the internet😂 I will never forget you sir🙏
@ibp4da97
Жыл бұрын
Thanks for your video, I was able to fix my aux!
@kendraperez6151
Жыл бұрын
Worked perfectly!! Thank you so much!!!
@TheCardsfan01
Жыл бұрын
You’re awesome!!
@wraithrunner2355
Жыл бұрын
Does the Bluetooth start working after you do that?
@wasimyousaf4245
Жыл бұрын
Excellent it works on my car.
@hasanalothman27
Жыл бұрын
Thank you for the vid and i have another question my indecators are not working all of them what should i do
@mikesuniverse1789
Жыл бұрын
This short video. Pun intended? Thanks for posting. Been wanting this aux fixed
@So_ShawKing
Жыл бұрын
This worked perfectly! Thank you so much!
@annastevenz8936
Жыл бұрын
Awesome thanks 👍
@Cozmonimbus
Жыл бұрын
Thank you! On my 2010 CX-9, I had to solder aux jack pins 1, 5, and 6 together. You really helped show how to insert and remove the module - all with one hand!!
@talmagewalters1655
Жыл бұрын
How did you connect 1 to 5 and 6?
@mzpearlay
Жыл бұрын
My partner used a bit of tin foil
@los77711
Жыл бұрын
Worked like a CHARM! 👍 👍 By crimping together. 2-3 minutes.... SWEET
@andrewmansaray3182
Жыл бұрын
Thanks so much for this…God bless 🙏🏾
@heathermai8311
Жыл бұрын
How can I solder them with?
@hollifield877
Жыл бұрын
it works! make sure you get a good connection
@a.whatmough4432
Жыл бұрын
It worked ...thanks!
@billkeon880
2 жыл бұрын
Why not just buy a new jack box and plug it in. Will that work?
@Steezy98866
2 жыл бұрын
Man you are a blessing
@evh5150
2 жыл бұрын
Thanks a lot very helpful video
@averymcfarland182
2 жыл бұрын
i bent the pegs together, fixed my problem!!!
@noheliajulisahernandezhern7189
2 жыл бұрын
Gracias excelente información 👌
@mabeljj
2 жыл бұрын
Got a used 2008 Mazda CX-9 - the aux did not work, and the solder technique did the trick! I’ve never soldered anything before and this was east and fast. Only thing, is now the menu doesn’t seem to be working on the navigation (not a big deal since I don’t use the car navigation) but I can’t seem to adjust the brightness or access anything in the menu / display. Not sure if this is correlated- but I believe the menu / display was working prior to fixing the aux.
@heathcliffvanpoo
2 жыл бұрын
Worked great! Thanks :)
@skysanchez6784
2 жыл бұрын
Do u put them together or do you break them ?
@safwanzamrik272
2 жыл бұрын
Thanks but I made soldering to that point its not working Only when I touch it with the tester working
@ggaabriell1
2 жыл бұрын
Mannnn thanks a lot, it worked!!!
@user-ce4ff9nu9w
2 жыл бұрын
Thank you very much.
@lordofmorning
3 жыл бұрын
thanks, this worked. do you have a scheme for where the other 3 wires from the jack are soldered?
@BramLelandScolnick
3 жыл бұрын
Amazing! This cost me $18.00 for a soldering iron and about 10 minutes of my time. THANK YOU!!!
@sathyaweerasooriya1940
3 жыл бұрын
Excellent video, I fixed my 2008 CX-9 AUX issue doing as explained here. Thanks a lot.
@BulkyHealthyCat
3 жыл бұрын
Will this work on mazda 6
@ramyrady9197
3 жыл бұрын
Thanks for your help 🌹🌹🌹🌹🌹 From Egypt 🇪🇬
@Elfdogable
3 жыл бұрын
I enjoyed the captioning and will try this out.
@Leaf.dz.
3 жыл бұрын
It worked! Thanks a lot, you are my hero!
@michaelnunez747
3 жыл бұрын
Thanks sir, never thought it could be that easy fix 👍
@ixayahidro6548
3 жыл бұрын
Thanks alot
@mehemedelahresh1107
3 жыл бұрын
WOW, worked like a charm, thank you very much.
@78COB
3 жыл бұрын
Fix worked perfectly on my 2008 CX9! solved my issue! Thank for posting this.
@mtpicture
4 жыл бұрын
I got it working but once I put the box back in the radio doesn’t switch aux...I soldered the two together like in the video
@faisaldp
4 жыл бұрын
It worked for me as well for my mazda cx 9 2012. Thanks!!
@alphanumeric2702
4 жыл бұрын
Thank you!!! After a blown aux 12v socket fuse, my AUX audio port stopped working. Your solution worked like a charm. (Mazda 6 GH 2008)
Пікірлер