Hey, so thankful for this video!! Without you, I would have been in frustration city and would have screwed something up big-time with those useless instructions!!!
@davidsapir9638
Күн бұрын
So awesome to hear this video helped you out, you're most welcome!
@trevorsmyth8210
2 күн бұрын
WELL EXPLAINED YOUR GOOD HELPED ME VERY MUCH WELL DONE THK
@philchristmas4071
7 күн бұрын
Beautiful 🇺🇸 made knife.
@CrazyQuadBrothersP3
14 күн бұрын
Yeah we did a video on assembly about 7 months ago as well. The instructions were so useless. 🙄 It was frustrating to put together as well. But is a great plane for the money. 👍🏻
@davidsapir9638
14 күн бұрын
I'll check it out!
@vatoloco6536
14 күн бұрын
I found one buck 119 with leather sheat for 8 dollars at the flea market lol
@hamzafaroon2427
16 күн бұрын
Hey I’m new to rc planes and wanted to ask can I put a 11.1 V 800 mah battery in this exact rc plane without changing anything except the battery nothing else what will happen exactly? I did see the measurements and the 11.1 V battery should technically fit.
@davidsapir9638
14 күн бұрын
Honestly I'm not sure, haven't tried it myself.
@kalebmcconaughy3489
19 күн бұрын
Thank you so much for sharing this video. The instructions were straight tash. I immediately went looking for a video. Slapped that thing together in no time. Also, thanks for explaining the buttons on this oddball transmitter.
@davidsapir9638
19 күн бұрын
@@kalebmcconaughy3489 Right on, thank you! So glad this video was helpful to you. Awesome plane, awful instructions!
@kalebmcconaughy3489
18 күн бұрын
Do I need to bind the transmitter?
@davidsapir9638
18 күн бұрын
@@kalebmcconaughy3489 Nope, it's good to go right out of the box.
@hamzafaroon2427
16 күн бұрын
Hey I’m new to rc planes and wanted to ask can I put a 11.1 V 800 mah battery in this exact rc plane without changing anything except the battery nothing else what will happen exactly? I did see the measurements and the 11.1 V battery should technically fit.
@theoztreecrasher2647
12 күн бұрын
@@hamzafaroon2427 I have heard of several folks doing just that and getting away with it. I have also seen a comment from someone who burnt out a board doing it. The problem is the full battery voltage is supplied to the board - a fully charged 3s must be right on the limit of what the board 5v and 3.3v regulators can handle. To be safe some people use a 12v to 7.5v mini buck converter for reducing the voltage seen by the board. Also check your motor and ESC temperatures if flying aggressively.
@Grantdaryn
27 күн бұрын
Why is my controllers mixed up when trying to fly the plan?
@davidsapir9638
27 күн бұрын
@@GrantdarynI need more specific info to help you out.
@joemack1004
Ай бұрын
I’m having trouble mounting the rear landing gear. I’m not sure if I’m dumb or missing something. Any help would be great, thanks.
@davidsapir9638
Ай бұрын
@@joemack1004 the rear landing gear pushes into the slot of that grey plastic circle. Just freeze the video when the plane is flipped over and you'll see it.
@joemack1004
Ай бұрын
@@davidsapir9638 thanks dude!!!
@joemack1004
Ай бұрын
Still struggling, does anyone have a zoomed in picture of the rear gear? The metal clip is too small to fit over the plastic piece, it just opens up and bends
@davidsapir9638
Ай бұрын
@@joemack1004With the plane upside down in front of you with the propeller facing forward, snap the landing gear wheel wire into the center slot of the circular landing gear hub, making sure the wire side is on the left and the pointy side of the rim is on the right. Tried getting back to you sooner but I was in the hospital recovering from surgery lololol!
@RCBeginners
Ай бұрын
Thank you so much, you helped me a great deal.. I fly UMX, and I got to say I'm a little jealous because I bought this for my stepson.. And the e-flite UMX P-51 is smaller and doesn't have those gorgeous lights. I only paid 70 bucks for it on AliExpress however it took almost 2 months
@D_RolliN12
Ай бұрын
I was thinking of the same setup but with aluminum instead of brass. Never heard of shokwood and chip flint and was thinking of the same setup. Nice!!
@davidsapir9638
Ай бұрын
Appreciate your time brother, thanks. You'll love it.
@marinorossi4594
Ай бұрын
that is special. great buy
@NewRCguyAlex
2 ай бұрын
Thank you I’m about to get this any day now and I wanna be ahead of the curve lol
@davidsapir9638
2 ай бұрын
@@NewRCguyAlex Nice! So glad this video was helpful to you, thanks for checking it out! Do yourself a favor and don't bother attaching the bombs, they throw the gyro off a bit and the plane flies a lot better without them, peace!
@NewRCguyAlex
2 ай бұрын
@@davidsapir9638 🙏
@kianwong4625
2 ай бұрын
Great set up help. Thanks. Ps have you tried running this on a umx 3s battery?
@davidsapir9638
2 ай бұрын
@@kianwong4625 no, not yet, but will definitely try the 3S battery, thanks!
@kianwong4625
2 ай бұрын
@@davidsapir9638 hi- i maddened the xx mustang on a 3s umx battery. It seemed to hold up well and had a noticeable effect, flying in the wind. The battery did get sucked quickly though. I got about 3 mins.
@kianwong4625
2 ай бұрын
@@davidsapir9638 sorry i meant i did a maiden flight on the XK mustang.
@theoztreecrasher2647
2 ай бұрын
7.15 Wrong way round! Tx LED solid is the start-up default 6G mode (self-levelling with pitch and roll limits.) 3D (LED flashing) is Rate/AS3X/Wind Correction Only mode. Pressing SENIOR when in 3D mode switches to Manual mode. To get back to 3D mode you must press the Senior/6G button again to return to 6G after which pressing the 6G/3D button will give you the 3D mode again. (Or you can press the 6G/3D button twice for the same result.) XK Destruction manuals are famous for their very poor translations but the pictures and diagrams generally allow most folks to work it out. Americans (being about the only country in the world which still uses the non-metric system) are at a bit of a disadvantage since the size of the screws listed with the pictures of where they go, is only shown in metric units. 😉😊
@davidsapir9638
2 ай бұрын
Thank you for taking the time to comment and straighten that out, much appreciated!
@willjohnson6854
2 ай бұрын
Are you going to use it?
@davidsapir9638
2 ай бұрын
If you have any assembly questions about the XK A280 that weren't addressed in this video feel free to ask, thank you!
@josephkolb2248
3 ай бұрын
That is a beautiful knife congratulations on your purchase
@jaynewelch1472
3 ай бұрын
Beautiful 😍
@asdaven1
3 ай бұрын
FK-190 would like to see that plane or a P-38 Lightning. Also isnt represented as much or known about but a Soviet Yak-9 would be a cool addition to include another main player in WWII
@unitedstatesirie7431
4 ай бұрын
Thank you for making this video. That Buck knife you bought is beautiful functional jewelry 💎
@jayclark7237
4 ай бұрын
Beautiful American craftsmanship!
@manuelveliz1878
4 ай бұрын
That's an amazing manufacturing knife....
@georgeware1692
4 ай бұрын
Thanks for the video. I have been considering the purchase of a new BUCK Custom, but I have been having trouble deciding on which one and how much to spend. You just sealed the deal. Thanks once again
@DGraham-i3y
4 ай бұрын
Beautiful. That would rip the bad gut apart, too.
@burkena
4 ай бұрын
Not Interested
@peteraltman6374
5 ай бұрын
I'm also a knive nut ,that is a beautiful knife you have a be very proud of it
@W49Boowie
5 ай бұрын
Buck's sales are going down the pan because they now make garbage standard knives and charge OTT prices for them and their QC is about the worst in the US knife making industry, there's have also been a notable amount of posts concerning poorly made " Custom " Buck knives in many FB groups over a good many years right up to the present day. Buck bank of brainwashed Americans buying their products because Buck have convinced Americans that it's unpatriotic to not buy them, that's Buck's BS for you! I've bought Buck knives for decades but I stopped in 2021 after receiving two 119 Pro's, two 120 Pro's, and a Buck Legacy Edition Kalinga all is S35VN and ALL of them were piss poorly made, it was just one disappointment after another and I had Buck send me shots of others they had in stock and they were all abysmal. Chuck Jr ( CJ Buck ) is demented, he's not in touch with reality and he sure as hell isn't in touch with the American people not unless ripping them off is acceptable which sadly it appears he thinks is. Their lifetime guarantee is their method of passing quality control onto the customer and that's a despicable as Buck shouldn't be letting these reject knives leave the factory. After generations of my family buying Buck knives, the BUCK now stops here! My sons and daughters won't go anywhere near them after the fiasco of the Pro's and the Legacy Kalinga with their asymmetrical grinds and asymmetrical primary edge bevels! It's now un American to BUY Buck knives as they now stand for pretty much ALL that is wrong with US made knives when other companies are getting it RIGHT!
@johnmutton799
5 ай бұрын
Very nice!
@beeamerica5024
5 ай бұрын
Price?
@georgeshotrodbarn2113
5 ай бұрын
Shes nicen.
@RobertSmith-ub6tk
5 ай бұрын
You never gave a price wonder What something like that cost
@alexolivarez732
5 ай бұрын
What type of steel did you go for?
@davidsapir9638
5 ай бұрын
Thank you for watching! The Chipflint is 440 steel.
@alexolivarez732
5 ай бұрын
@@davidsapir9638 Nice!
@viper071
5 ай бұрын
Amazing knife, what was the cost?
@TRXMOB
5 ай бұрын
$300
@comeoncents3288
5 ай бұрын
Awesome!
@TRXMOB
5 ай бұрын
Just received mine today with mirror finish blade. So upset the hand guard has noticeable play. So I’m sending it back to fix it. Otherwise it was perfect with no imperfections. I have around 20 of the 119’s and none of them ever came loose.
@davidsapir9638
5 ай бұрын
Man I'm sorry to hear your unboxing experience was spoiled by such a noticeable problem. Sounds like otherwise the knife is incredible looking. When your knife is returned to you the way it should be, I hope you'll check back in on how they did making things right for you. If you speak to or email a customer service rep, maybe you could request Connor Burns take care of your knife after seeing his work featured on this video. And if possible a pic of that beauty when you get it back! That mirror finish blade must look so good.
@WizzdummHeadley
5 ай бұрын
This is one wicked looking knife! I always liked the look of them & they do sell at the local Canadian Tire near me for 69.99 if I remember correctly!? Just the standard black on silver handle which still looks very good.
@1947ramrod
5 ай бұрын
I have used Buck knives for more than 40 years and have always been satisfied with the quality. I am disappointed that some of them are now made and China! I don't believe that the Chinese knives are as high of quality as the ones made in America.
@kirbycreekmo
5 ай бұрын
Wow! I would not have guessed it would turn out so well. Very impressive knife. Thanks for sharing.
@konradyearwood5845
5 ай бұрын
It feels sharp just looking at it so I will not be touching my screen.
@Woodstock271
5 ай бұрын
Wow! That’s the prettiest Buck I’ve ever seen. I’ve owned many older Bucks but never something like this custom.
@garyhull5617
5 ай бұрын
Did I miss ths price of this toad staber?.....How much do I need to scrape together?.
@scottharris6423
5 ай бұрын
OMG that incredibly beautiful. I visit their Custom shop. THANK YOU FOR SHARPING!!!
@philippestrickler3461
5 ай бұрын
Your BUCK Knive is a piece of art . Never seen so beautiful . Congratulations .
@davidsapir9638
5 ай бұрын
Thank you brother.
@sameeralazawee7524
5 ай бұрын
Really very nice >>>>> Thank you .
@davidsapir9638
5 ай бұрын
Right back at you for checking it out.
@buddyleeson4529
5 ай бұрын
Please tell me what is the price for one
@JesusTorres-m3p
5 ай бұрын
Beautiful knife. what is your custom price?
@dbee5997
5 ай бұрын
I watch the video twice I guess I missed the part on how much this custom cost 🤑???
Пікірлер