Hey do you have the notes for this class And would I be willing to send them to me
@adamrozman
10 ай бұрын
Hi yes, there's a link in description
@sowharouna6154
Жыл бұрын
La traduction en français cette si vous avez cette traduction je comprend anglais
@christosvasiliou219
Жыл бұрын
Another question, for high re numbers you just not put laminar flow you pick the k-epsilon something, also, what is the actual difference of transient vs steady, which is the one to go if geometry is complex and rey number is high. Reynolds number for your example is changing in terms of the speed, the other factors are being the same
@adamrozman
Жыл бұрын
Here we are modeling unsteady flow using RANS, so turbulence is simulated using a model (K-epsilon in this case). Unsteady flow is a fluid quality, while transient or unsteady is just how ANSYS is treating your solution. If I run this as steady instead of transient, it will eventually reach an average solution. I'm running transient here because I want to see the shedding propagate in real time. However, steady/transient depends on your application. If you just need to find average lift and drag, you can run steady, even if there is turbulent flow, until your values average out.
@christosvasiliou219
Жыл бұрын
i have a project for my thesis, it is a very complex geometry (submarine that looks like a drone). Its reynolds number is 67000 so for sure i need to run a transient calculation. My question is, how do you set up the inflation layers,numbers,division e.t.c every part you did or you have to do to run a cfd calculation in terms of the complexity-high reynold number.
@adamrozman
Жыл бұрын
You can do a triangles surface mesh for the 3d body. You can qualify this by a constant triangles size. Play around a bit depending on the size of your object. Generally you'll want to follow airfoil rules where you clump the points more towards the leading and trailing edge. The inflation layers are to capture boundary layers. For this case the number of layers is excessive- for your case use about 20 layers and look up a y+ spacing calculator online to figure out wall spacing given your design parameters. The wall spacing to give y+ (non dimensional parameter) equal to 1 is the size of your first inflation later.
@anthonyluan2788
Жыл бұрын
salve para o pedrinho melhorzinho de BJ
@anthonyluan2788
Жыл бұрын
valeu primo, entendi tudo
@silverlion2157
Жыл бұрын
Hi, can i know the title of book that you get this notes from?
@adamrozman
Жыл бұрын
R.L. Norton, Design of Machinery, 6th Edition, McGraw-Hill
@nurathamer9265
Жыл бұрын
I need solution of norten (Solution manual for machine design (Norton 3e) -Person Prentice Hall (2006))
@christine1775
Жыл бұрын
Wow, great job!
@princeasante4114
Жыл бұрын
Hello bro Please can i get google link to the notes and all the materials you used??
@adamrozman
Жыл бұрын
This is late, but I've added a link to the textbook notes I went over in this video (and for the rest of the course)
@navy2978
2 жыл бұрын
is it paper/journal based, sir? if it yes, can you share it sir?
@mistyukaj3133
2 жыл бұрын
thanks for your tutorial <3 it helps me
@huypham-bw1hp
2 жыл бұрын
Dear sir. My flow is not quite parabolic, I have tried increasing the length of the tube but the result is the same.
@alyoung2107
2 жыл бұрын
JAS your new TOC plane?
@gabyss7085
2 жыл бұрын
Shulman can fly a brick if he wants. Nice
@neeshl3409
2 жыл бұрын
The sheer willpower, intellect, and engineering prowess to pull off this impossible feat is astounding. UCF should start a scholarship the fine young mens names who managed to pull this off!
@adamrozman
2 жыл бұрын
bet
@MultiYOSEEF
2 жыл бұрын
Hi do you give Ansys fluent training if you do so please May I ask you to provide your email
@ToniBorisov
2 жыл бұрын
I don't know why but when I open mesh, geometry doesn't load. I tried updating, also importing from external source, such as SolidWorks, still doesn't work.
@ToniBorisov
2 жыл бұрын
Never mind, I creted another standalone, and loaded the geometry using solidworks x_t file
@mohammedlaftafaraj1471
2 жыл бұрын
Hi. Can you sent to me report out this tutorial, please
@alae_azzouz8509
2 жыл бұрын
peace be upon you brother Mohammed Do you have educational programs about thermodynamics, heat transfer and combustion in aeroscape domainThanks in advance
@mohammedlaftafaraj1471
2 жыл бұрын
Yes, thanks I need report out, please
@imwaz3644
3 жыл бұрын
Is the recent iris xe graphics with the 11th gen i5 16gb ram compatible and sufficient with ansys for medium 3d simulations?
@aleyhaider9038
3 жыл бұрын
Nice
@ivanv.betancourtm.4116
3 жыл бұрын
Hi Adam, thank you very much for the tutorial video. I have a question about the last component RESULTS of the Workbench project. How can I develop this last component? Where I find the numerical results to show it in my project?. Thank you again for your attention. Kind regards.
@user-wi6hg3zo7z
3 жыл бұрын
thank you,could u teach this course.
@paytonlussier115
3 жыл бұрын
Thanks Spider-Man
@rokaiagamal1115
Жыл бұрын
HAHAHHHAHHHAHA
@aminaberkani9568
3 жыл бұрын
thank you
@ahmeterkoc9502
3 жыл бұрын
Start of the meshing, how can I choose the hexahedral mesh in methods?
@cherrybearytseed6518
3 жыл бұрын
Lol your the guy who asked if that one guy was wearing pants
@superdude11235
3 жыл бұрын
Eli Egbert?
@beruberhanu7691
3 жыл бұрын
please can you upload vedeo by modeling VCCR engine
@paytonlussier9156
3 жыл бұрын
Yes please!!
@fikirinijr6807
3 жыл бұрын
your presentation is good, next lesson Try to explain clear the figures
Пікірлер