Saiful's Classroom
(Peace of Almighty be upon you)This channel is a attempt to make the basic Textile, Science, Engineering, and Islamic contents interesting and to give complete idea on specific topic in one place. I shall clarify any topic completely with examples and references so that you can find that topic enough and useful for you. Aim is to provide basic knowledge textile community. The textile technology has been improved a lot but we textile people are still struggling with basic. In one side, our syllabus is not up to date with technological change, on the other hand we are not studying the existing syllabus completely. In this situation We will run short of truly technically sound manpower for this valuable sector.
For this thinking, this is a try to improve at least basic topics of our textile students. And finally, I should disseminate my knowledge to those who can be benefited with that. Thanks to KZitem for making such a good platform. Otherwise with my death all my knowledge would vain
- 11:23
- 6 ай бұрын
Weaving 1 (Lecture 31) | Tertiary Motions | Warp Protector Motion, Weft Feeler & Patterning M...
- 11:36
- 6 ай бұрын
Weaving 1 (Lecture 30) | Tertiary Motions | Warp and Weft Stop (Side & Centre Fork) Motion
- 18:22
- 6 ай бұрын
Weaving 1 (Lecture 29) | Automation | Features of Automatic Loom | Causes of Warp & Weft Brea...
- 37:11
- 6 ай бұрын
Weaving 1 (Lecture 25) | Take Up | 7 Wheel Take Up Mechanism
- 26:55
- 6 ай бұрын
Weaving 1 (Lecture 22) | Beating Up | Sley Motion is Eccentric and Sley Eccentricity Ratio
- 24:15
- 6 ай бұрын
Weaving 1 (Lecture 21) | Beating Up | Single Beat Up Mechanism and Double Beat Up Mechanism
- 20:39
- 6 ай бұрын
Weaving 1 (Lecture 20) | Beating Up | Purpose of Beating Up and Classification of Beat Up
- 38:23
- 7 ай бұрын
Weaving 1 (Lecture 19) | Picking | Faults, Timing, Tappet Construction & Intensity of Picking...
- 25:28
- 7 ай бұрын
Weaving 1 (Lecture 18) | Picking | Picking Force and Picking Power Consumption related Math
- 18:46
- 7 ай бұрын
Weaving 1 (Lecture 17) | Picking | Power Required for Picking | Energy Consumption for Picking
- 18:27
- 7 ай бұрын
Weaving 1 (Lecture 16) | Picking | Picking Types, Over Picking Mechanism and Under Picking Mechanism
- 47:42
- 7 ай бұрын
Weaving 1 (Lecture 14) | Jacquard Shedding | Single Lift Single Cylinder(SLSC), DLSC, DLDC Mechanism
- 8:25
- 7 ай бұрын
Weaving 1 (Lecture 12) | Dobby Shedding | Card Punching, Methods of Pegging Lags , Dobby Timing
- 29:11
- 8 ай бұрын
Weaving 1 (Lecture 10) | Dobby Shedding | Hattersley or Keighley Negative Dobby Shedding Mechanism
- 12:06
- 8 ай бұрын
Weaving 1 (Lecture 9) | Dobby Shedding | Scope, Classification and Uses of Dobby Loom
- 26:16
- 8 ай бұрын
Weaving 1 (Lecture 8) | Tappet Shedding | Timing; Advantages & Disadvantages; Speed Calculations
- 15:36
- 8 ай бұрын
Weaving 1 (Lecture 7) | Example of Geometry of the Construction of Shedding Tappet | Twill Tappet
- 56:44
- 8 ай бұрын
Weaving 1 (Lecture 6) | Construction of Shedding Tappet | Geometry of Making Shedding Tappet
- 24:59
- 8 ай бұрын
Weaving 1 (Lecture 5) | Tappet | Shedding Mechanism, Scope, Dwell and Types of Tappet
- 50:54
- 8 ай бұрын
Weaving 1 (Lecture 4) | Shed and Shedding | Bottom Close & Centre Close Shed, Semi Open &...
- 1:02:04
- 8 ай бұрын
Weaving 1 (Lecture 3) | Loom Drive, Gear, Brake, and Clutch
- 35:47
- 9 ай бұрын
Warp Knitting Math
- 21:34
- 9 ай бұрын
Пікірлер