Danke, bei mir wars keine Schraube sondern etwas anderes weiß nicht was, was rausgefallen ist irgendwie
@1BenDoverWilson
5 ай бұрын
When I took mine apart a spring came out... Not sure where to put it back
@allanbarlow685
6 ай бұрын
The fix didn't work for me but led me to find the fault. I can't put a photo on here to show you the part but it was a loose small Allen key screw near the crank. 👍 Thanks for the video.
@benbussell2262
24 күн бұрын
It was the same for mine. The big screw was already tight, but there was a small Allen screw that was loose. Once tightened the issue was fixed
@Ziky777
9 ай бұрын
Thanks! This solved nothing and now my battery release button is rattling crazy loud. perfect
@PeterHofer-gd3ye
Жыл бұрын
Bought this cause i thought it could come in handy, but before I was able to enjoy it much, my warranty was out...so I thought I'd check it out myself, cause it was louder than a D6 C"l"atterpiller...low and behold all 4 posts that attach the body to the motor were broke, and 2 of the wires were bare because they got in between the clattering motor and the body...wouldn't mind a replacement, as it was used less than a dozen times...don't trust the body parts, but the motor did it's job...very cheaply built
@tarzann6178
Жыл бұрын
What if gun is stuck in bum
@prabhurajm
Жыл бұрын
You have point out a hex screw right, in the that place front side back color part/spare is connected right? What is the name of it. In my massager that black part is broken! Please anyone help me on this!
@sarathratna7200
Жыл бұрын
We got a rattling noise from 'Sharper Image Power Percussion Deep Tissue Massager' bought from Costco. Using these guidelines, removed the outer cover and tighten the screws inside, which are different from the ones shown here and fixed the problem. Thanks for this video.
@sintonmovie8643
Жыл бұрын
Not All Have an Allen Key .Mine has a screw and it is the toughest screw in the world .Wont Tighten And Wont Loosen
@darcdiego14
Жыл бұрын
need a replacement battery
@potter621
Жыл бұрын
When i press the masaage head it did not run
@stuartdoyle99
Жыл бұрын
Thanks for the video, if the battery is fixed to the gun, should I drain the battery and then open?
@marcymorton
Жыл бұрын
Hi - I have an E1 error and it says online to reset, can you reset the gym2go? Is this code repairable?
@gmangsxr750
Жыл бұрын
I really like this one has such easy access to the internals. I have a cheap knockoff and probably have to trash it because it’s such a POTA to change the batteries
@shamilbasayev952
Жыл бұрын
Gut erklärt
@Josander24
Жыл бұрын
Hello, mi gun just run out of all battery power and now is unable to charge up again…😡
@TheZombiesAreComing
2 жыл бұрын
How do I do this with a 'XRX pro mini MASSAGE GUN'
@tand_tube
2 жыл бұрын
you are the man doggy.
@luisgonzalez3785
2 жыл бұрын
Mine is not that screw you tighten in your video ,the problem with mine rattling is that piece where all the attachments pieces go into is worn out. There is no fixing that unless that piece is replaced, if yo can give me an idea ,ill be glad to hear from you or anyone, this is the first I bought and also bought a 2nd one and it also started rattling already. damn.
@zashibys009
2 жыл бұрын
New massage gan and something loose inside the shaft.where is the battery. Working well bat the battery is not fixed properly.
@TTTT-sb2zr
2 жыл бұрын
Why do you not publish my evaluation on your website? Seems that you choose which are public. You also advertise with fast shipping but its already two weeks ago, since i ordered. Also you advertise with a flash sale only for today and that your massage gun is nearly sold out but this message appears every day... this is not trustworthy at all... i also believe that the price of 259€ is absolutely overpriced, even the 99€ for your every days "flash sale" Hopefully the massage gun will appear within the next days. Dont have a good feeling anymore
@jono7248
2 жыл бұрын
Mines has a grinding noise and stops pulsing when pushing on muscles with a little pressure. Any fix for that?
@dianabrewer5840
2 жыл бұрын
Mine does not want to move at all even thou charged . What can I do?
@markswales8923
2 жыл бұрын
They should use a spring washer to stop the Allen key coming loose.
@CoryTrusty
2 жыл бұрын
great fix, and did not have to remove the battery
@hungrylettuce9452
2 жыл бұрын
I have a Darkiron one. How can I open it please help.
@gym2go921
2 жыл бұрын
Still noisy? Please add some drops of WD40 or other kind of lubricant/machine oil to the piston of your massage gun (the part the massage heads attach to from inside the massager). This will keep it quiet and running smooth for a long time.
@peterfable
Ай бұрын
Do NOT use WD-40 as a lubricant. Remarkably common mistake. Fantastic all-purpose cleaner of almost anything, but any immediate lubricating qualities are a very temporary remedy. If you don't want to open it up to re-apply WD-40 regularly, use real silicon spray or some other lube or grease if want to quiet a noisy piston. Using just WD-40 cleaned and stripped it of any remaining lube, so it won't be long before it's noisy again. But now It's experiencing even more friction and wear potentially leading to early failure. WD-40 is NEVER a substitute for long term lubrication.
@babaji6270
2 жыл бұрын
Mine is so loud it's like a drilling machine any help I did what you did
@gym2go921
2 жыл бұрын
Please add a lubricant to the piston from the inside of your massage gun (the part you attach the massage heads to). This should remove most if not all of the noise. Best wishes
@brelin1167
3 жыл бұрын
Mine just doesn’t move when I turn it on does anyone know how to fix thst
@brelin1167
3 жыл бұрын
That*
@DarkQuark-
3 жыл бұрын
Use loctide to keep the screw in place.
@jamesjesfen2720
3 жыл бұрын
What if my screw won’t budge at all? It’s screwed on so tight I can’t tighten or loosen it
@valonberisha7299
3 жыл бұрын
WD40…. Just kidding
@ryanpeters5447
3 жыл бұрын
facts
@annfalco9044
2 жыл бұрын
Same problem. What did you do to fix it?
@gym2go921
2 жыл бұрын
Please add a lubricant to the piston from the inside of your massage gun (the part you attach the massage heads to). This should remove most if not all of the noise. Best wishes
@wesleyfulton2186
3 жыл бұрын
Fixed! WOW! Mine WAS loud (like a lawn mower) and then it stopped working. All the lights were on but, no movement. Now it works and it purrs. wow. thank you.
@duncoyaomean6687
3 жыл бұрын
Worked exact on my LEGIRAL from Amazon but is discontinued and NOW CALLED TOLOCO 😂 Sneaky Amazon✌️ 🙏 bruv
@luisgonzalez3785
2 жыл бұрын
S.O.B I HAVE'EM BOTH ,the rattling is not always coming from that screw, mine just worn out that piece that all the attachments go into. I'm assuming they're not selling that piece, you say they discontinued that LEGIRAL gun. Right?
@asarizq
3 жыл бұрын
My new fascial gun stops in 2 seconds.how to solve this problem?
@stephfrank8183
3 жыл бұрын
Mine is just 00 on both sides with the battery percent one flashing 00, any advise on what this could be please?
@seabb8222
3 жыл бұрын
Is there something else I can use instead of a size 9 hex key . Please respond
@zaku2552
3 жыл бұрын
Torx bit
@Andrew_070
3 жыл бұрын
I fixed my rattling by loosening the 4 plate screws around the middle thing that turns
@teecee398
3 жыл бұрын
I had to tighten a screw on the plate and now its quiet as. Black guy in a horror movie lol
@khuramkhan6709
3 жыл бұрын
Mines stop working
@zerodarkthirtykcg2250
3 жыл бұрын
I can’t lie it didn’t work but I won’t dislike
@perspectiveflip
3 жыл бұрын
Try adding some drops of machine oil in the piston. That usually works
@zerodarkthirtykcg2250
3 жыл бұрын
@@perspectiveflip is machine oil like wd-40
@batscher61
3 жыл бұрын
Danke das du es Zerlegt hast bevor ich es Kaufe.
@batscher61
3 жыл бұрын
ahhh jetzt weis ich wie das Funktioniert Motor Kurbelwelle Pleuel und Bolzen / Kolben ich dachte es würde Elektromechanisch Magnet Bolzen angetrieben
@franco577
2 жыл бұрын
Hallo würde da Loctite helfen?
@afridi46
3 жыл бұрын
Sir what is E2 code
@gym2go921
3 жыл бұрын
This is a battery error. It means your battery needs to be replaced. Best wishes
@vinceromero7013
2 жыл бұрын
The gun is garbage
@josephhernandez5862
3 жыл бұрын
Mine says er as soon as I turn it on
@gym2go921
3 жыл бұрын
This is very likely due to a faulty battery. Best wishes
@manuelalejandrovelasco7643
3 жыл бұрын
Mine fixes but only for a few seconds, then it starts doing that noise again, what else can I do?
@timanderson7055
3 жыл бұрын
Use a little red loctite it will never come lose again
@gym2go921
3 жыл бұрын
Please put a few drops of machine oil inside the piston mechanism in front. Also make sure that all screws inside are tightened and the cables from the display are twisted so they don't interfere with the machine inside. I hope this fixes the issue for you. Best wishes
@judsjo
3 жыл бұрын
Nice thank you
@goldcoasttime
3 жыл бұрын
What is an error code E100
@gym2go921
3 жыл бұрын
Hi Paul! This likely means that your battery has become faulty. Best wishes
@TumbleSensei
3 жыл бұрын
Fixed my gun immediately., I have a different brand but it seems the problem is common across all makes and models.
Пікірлер