No, there was a problem with the reverse lights in my case.
@boostboyracing
2 ай бұрын
Your helper is better then mine!!!!
@martinvazquez4191
4 ай бұрын
Your video was very informative,BUT you forgot to talk about the síntomas of bad functions 😮
@jimmyd7858
5 ай бұрын
Do you have to have anything mount the engine underneath while you remove this part
@averagedudeproductions5650
Ай бұрын
Was not needed in this case, but doesn't hurt
@JohnODonovan1
5 ай бұрын
does anyone know where the egr valve for the 2000 xterra 6 cylinder is located because it's not like this one in this video
@rorylayman625
5 ай бұрын
What size socket or wrench for the big bolt?
@kalebellingson4313
5 ай бұрын
What is the little black sensor right next to that one?
@averagedudeproductions5650
5 ай бұрын
I believe that’s the temperature sender, based on what I found previously
@19MofuMofu
5 ай бұрын
the front one is the Temperature transmitter.
@solospoon7795
Ай бұрын
@@19MofuMofuhey is there any chance that you know a part number for that? I just broke mine trying to wrench off the coolant temperature sensor shown in the video. That would be a huge help cause Google didn’t come up with anything for a temp transmitter
@johndicklsom1023
Ай бұрын
@@solospoon7795my o Riley’s had one you could bring it to them and they can look it up and stuff for you that’s what I had to do most part stores should be Able to do it!
@ohnomyspaghettt
6 ай бұрын
Doesn't work on 2008 Camry hybrid. Can't find the natural safety switch
@TourettesMobileMechanic
2 ай бұрын
On the transmission on some of these vehicles. Look up transmission range sensor
@BinhThanhNguyen-p7x
6 ай бұрын
3 top bolts are straight out easy but not the side bolt. This side bolt will be hit abs lines. It's not that simple as you said bro.
@josecapella7519
7 ай бұрын
LIke other people, Thank you for a great video and for the tips about the U-nuts and the tubing. Keep doing this.
@RobertWest-e6m
7 ай бұрын
Yes I have a 2000 Nissan Pathfinder can you show me asap how to put hose back on it right if you can may God bless you
@hotshot3d
7 ай бұрын
No BS, straight to the point! Subbed
@billpawelczyk5855
9 ай бұрын
Get a stick. I have no egr. 😂
@jeffcreighton404
6 ай бұрын
I have a 3.3l manual, can I just do an egr delete? What would be the result?
@comprandodepositosenabando2548
10 ай бұрын
thank you for your help I really appreciate it
@N0b00st
10 ай бұрын
Very good
@Boloney
11 ай бұрын
What size wrench is the big nut?
@JD1976
Жыл бұрын
Was wondering if the computer needs to learn it or anything. Is it a simple off and on replacement?
@danielboguse4249
Жыл бұрын
Did the switch magically come off and back on the transmission? If you have it in park the cable cannot move.
@TrueRavenwolf
Жыл бұрын
I just removed cleaned and reattached the EGR valve on my 2004 Xterra with code P0400 and found out that the back bolt bracket of the 1st bolt is at the bottom of the EGR not at the side...hope it helps somebody as is not shown in the video.
@MythicAPEX_47
Жыл бұрын
How did you get the horse shoe part back in place?
@averagedudeproductions5650
Жыл бұрын
Tedious Labor
@shuggakaine9257
Жыл бұрын
why do you need to replace it in Neutral? why Not in Park? is it because the new switch comes lined up already in Neutral?
@JC-jo9bf
Жыл бұрын
This was helpful. Thank you.
@robinsonguevara566
Жыл бұрын
Can this information applied to a 2.4 Nissan frontier xe?
@garylp3
Жыл бұрын
A big Thank You. I had the exact same problem. Watched your video. Sure enough my 2003 Xterra has a same broken vacuum hose as yours. Changed it and everything good so far.
@averagedudeproductions5650
Жыл бұрын
Awesome, glad to hear it helped!
@garylp3
Жыл бұрын
@@averagedudeproductions5650 So the EGR code went away. I'm now dealing with a P0171 code.
@marauder3026
Жыл бұрын
Wat code did u have?
@averagedudeproductions5650
Жыл бұрын
Sorry, I don't recall the specific code as its been awhile, but the code specifically pointed to the EGR. All other signs pointed to that being the issue as well. Unfortunately, I had missed the split hose prior to changing the EGR, but did end up finding it.
@kd5ozy
Жыл бұрын
what were the symptoms??
@averagedudeproductions5650
Жыл бұрын
Didn't really have any that I could tell, other than the engine light coming on.
@rogerrabbitonpcp6021
Жыл бұрын
I have a 00 4 cyl frontier that keeps throwing me the p400 code. I've replaced the egr valve n the celluloid but the code keeps coming back, HOWEVER recently since I've moved to the east coast where it's much colder, randomly the check engine light will randomly shut off for awhile, then randomly return. Having problems figuring it out I'm wondering if it's the temp sensor, dirty lines, or even the intake manifold.
@marauder3026
Жыл бұрын
Did u figure out wat is causing the code?
@rogerrabbitonpcp6021
Жыл бұрын
@@marauder3026 nope, so my guess is the temp sensor or clogged vacuum lines but I'm not mechanically inclined nor have the money to throw to fix it truck runs fine as is
@bjhachannel6747
Жыл бұрын
bad shortcuts video
@jzbrynn
Жыл бұрын
how do you remove the big nut on the EGR valve? what tool did you use?
@strada21_
Жыл бұрын
Thank you !! Just like you i watched the video after making the mistake of dropping the back bracket,,is only solution removing the intake??
@averagedudeproductions5650
Жыл бұрын
I was able to remove and replace the back bracket without doing anything to the intake.
@elchamber
Жыл бұрын
How much would this cost to replace? Just a ballpark.
@averagedudeproductions5650
Жыл бұрын
Can't remember what I paid for the part but it wasn't expensive.
@elchamber
Жыл бұрын
@@averagedudeproductions5650 I paid like $150
@ramirovillegas4762
Жыл бұрын
I replaced mine on my 14 tundra all the gears on dashboard are lit except the Neutral light when I switch my gears. Would you happen to know why that is? Originally I changed the Neutral Safety Switch due to the computer throwing a P0705 code and now it’s good except for the Neutral not lighting up.
@-kp3
Жыл бұрын
were you able to find a fix? I am having a P0905 code on my 2018 camry now and looking at replacing neutral safety switch
@TourettesMobileMechanic
2 ай бұрын
@@-kp3I have similar issue on a customers car. I have done these before. If you don’t align then correctly they will be out of wack. On the customers vehicle I’m having a brake switch light with a transmission range sensor/neutral safety switch? Problem is I don’t think that’s the problem. It’s a crank no start condition. More than likely it’s a ECM issue I think? I wish this video had the resin for the replacement?
@katilovesghosts
Жыл бұрын
💪 thank you so much Me and my bro will be working on this I let you know how it comes out 👍
@averagedudeproductions5650
Жыл бұрын
I'd be curious to hear, good luck!
@DayleSoares
Жыл бұрын
in addition to the reverse light, was this replacement to prevent the car jerking when you switch from park to neutral or reverse? Thanks for the video it was very informative!
@averagedudeproductions5650
Жыл бұрын
No sir, not in my case. This car is very smooth in the gear changes. I personally wouldn't think that this switch would have anything to do with gears jerking. That sounds like a separate issue to me.
@fernandob3243
6 ай бұрын
It actually will do that don’t know why
@phamos9710
2 жыл бұрын
What made u replace the egr valve? Did u have a code pop up? I got the same make and model, my check engine light jus popped on code P1491?
@averagedudeproductions5650
2 жыл бұрын
Yes, the code specifically pointed to the EGR. All signs pointed to that being the issue. Unfortunately, I had missed the split hose prior to changing the EGR, but did end up finding it.
@LifewithMo2023
Жыл бұрын
What tool did you you to get the big bolt off ?
@MrPyroman19
2 жыл бұрын
I think I'm having the same exact problem you had. What was the name of the hose you replaced and where did it connect? Thank you so much, I feel closer than ever to solving my egr code issue
@averagedudeproductions5650
2 жыл бұрын
Man, I wish I knew the precise name of the hose part, but I'm sorry, I don't. I used a section of high heat, silicone hose from a 10' role that I ordered from Amazon because no store or dealership near me stocked the hose part I needed. If I remember right, it was only a 5"-6" section in length, and it was 5/32" (4mm) thickness. The original hose wasn't a specific mold so any after market should work fine. If you look closely at the location of the blue hose in the video, it's pretty easy to pick out where that specific hose attaches. Good luck, hope that helps?
@averagedudeproductions5650
2 жыл бұрын
The hose I used...............www.amazon.com/gp/product/B08YZ24RGQ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
@grovermcnair9447
2 жыл бұрын
I’m having a similar problem on my 03 Frontier. No codes but high long term fuel trim. Spraying carb cleaner does not indicate a vacuum leak but I suspect the hose you found may be the problem. Thanks for the video
@eddiesheeran5791
2 жыл бұрын
Great video man, thank you. I was looking for some background info before I do this job on a 2000 Pathfinder SE 3.3 V6. I laughed when I saw Randy, he looks like a great assistant haha. I'll try not to drop the horseshoe nut into the abyss down below.
@averagedudeproductions5650
2 жыл бұрын
Thanks for the feedback, hope it saved you some headache!
Пікірлер