Thats been my experience with customer service too....... Im going with a different brand on the build....too complicated with their stuff....
@tylerseabook9423
9 ай бұрын
This is user error this kit goes together beautifully. The quick disconnect is a joke though
@mbelite1
Жыл бұрын
Second time I’m using McLeod and had issues both times. I need to find a better company
@audiohqu
Жыл бұрын
Bolts onto a T-10 or Super T-10 with 5/16 bolts. There is no nut on the Borg Warner input shaft, only a retainer clip. Good video for guys with Muncie that would not know the incompatability of Mcleod 1300 bearing though.
@NickeyChevelle
2 жыл бұрын
I recently (July 2021) installed a 1350-1 Hydraulic Throwout Bearing on my Tremec TKX Transmission. Apparently, the folks at Mcleod took your concerns to heart and fixed the bolt problem (I don't know if they fixed the problem with the M-20 nut...).
@DanneyTanner
3 жыл бұрын
What did you do for neutral safety switch as the kit dont have provision to mount one on the new pedal? I just bought one for my 70 chevelle and just like yours.
@lordnetsplits3192
4 жыл бұрын
The only industrial label printers this size on the market are the zebra printers, even dymo printers aren't industrial.
@kennethalbert4653
4 жыл бұрын
I think you got the wrong kit, there is a kit that has an -AN 4. That doesn't excuse the improperly drilled holes.
@majordynamic8641
4 жыл бұрын
Lmaoooo you're trash and don't know what your doing 😂😂😂😂😂 you need to calibrate your printer
@JohnMartin-eb7jn
4 жыл бұрын
How did you end up resolving this issue. Did you use another brand bearing?
@stevenfinch8642
4 жыл бұрын
you did not. set it up correctly I was about. to throw it out. into. I look into. it. it. works perfect the drivers you get dont use. use other drivers I can help email me anyone who needs. help.
@99jarmy
4 жыл бұрын
Steven Finch please tell me what to do, I’m having the same problem!
@thecollegepicker
4 жыл бұрын
Did you calibrate it? I looks like it needs calibration.
@mariomarquez9263
4 жыл бұрын
I was thinking of buying this but not sure now??? I just bought a Tremec 5 speed and removing my 700r4
@tylerseabook9423
9 ай бұрын
Buy it and don’t use the throwout bearing.
@KingsWeldingandAutomotive
4 жыл бұрын
Hi. I bought this kit without the bearing. Mine fit perfect no issues. 69 camaro. I think you figured it out by now but this was intended for a stock camaro throwout bearing from a t56. Those have a quick disconnect end on it that your hose from the kit would connect to.
@pmadd8882
4 жыл бұрын
You purchased the kit without the bearing, 90% of my problem was the bearing!! HELLO!!
@mespinozamorales
5 жыл бұрын
And this printer? www.amazon.com/dp/B07PK11VKW/ref=dra_a_rv_mr_ho_xx_P600_100?psc=1&tag=dradisplay-20&ascsubtag=74893c4c81b2ebb96274c4a9e1dd32eb_CT&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExME0zTUJJMVNUSTZBJmVuY3J5cHRlZElkPUEwMDg2ODk4MlQ3MEo5NEtKVTVFJmVuY3J5cHRlZEFkSWQ9QTA4OTA1NzIzUldCODhUQTFZNEU1JndpZGdldE5hbWU9c3Bfc3luX2RhX2Rlc2t0b3AmYWN0aW9uPWNsaWNrUmVkaXJlY3QmZG9Ob3RMb2dDbGljaz10cnVl
@Psi105
5 жыл бұрын
It does that if you have the wrong size labels installed. It detects the end of a label where there should not be one.
@anthonymacon01
5 жыл бұрын
yeah umm i need your help , I have the same thing you have and starting to go threw the same problem. However i can't take it back and i have to make it work . What do you suggest????
@richardbeaudet7718
4 жыл бұрын
So what did you end up doing to get this thing
@CodycoWeb
5 жыл бұрын
have it works great on windows 10, print shipping labels thru stamps.com and ebay site, print amazon FBA stickers. great printer.
@zaidmaad1981
5 жыл бұрын
Hi can someone help me pls do the sitting for w10 im struggling here Thanks.
@queendripz1228
5 жыл бұрын
Can anyone tell me what it means when the red and blue light is on together I cant get it to print anymore
@zaidmaad1981
5 жыл бұрын
can you tell me how to do the label sitting I can't get it right if you can send me some pic that will be great [email protected]
@otakucosplay
5 жыл бұрын
did anybody got it to work on Windows 10
@carollevine8413
5 жыл бұрын
Too late already bought it...I cannot get my labels to print the set up was no problem but I cannot get the label to turn and print correctly
@jianliangguo7689
5 жыл бұрын
Could file an A to Z case on Amazon, get back your payment. Don't wast your money. they MFLABEL company sell authenticate printer. NO good service, My friend was cheated by MFLABEL on Amazon (www.amazon.com/dp/B073XJJD5C), Serious NO recommend..... Totally crash...
@linreve
5 жыл бұрын
Hi ! I bought this printer and I have been so frustrated, I can’t download the drivers on my laptop, how u did it ?
@JennWakely
5 жыл бұрын
Same. ugh
@anguyen1920
5 жыл бұрын
I suspect that you 2 use MAC computers, correct? If that's the case, were you able to download the driver? If not then go to this website: drive.google.com/drive/folders/0Bw1BhQBGcQfQYUJSaTdBOWt1eDA and follow the video called Damo for Mac. I got to the website after clicking on the mflabel.com/ (the printer website) and click drive download DT-108B. I don't have the machine but I'm doing some research on these thermal label printer and came across this one. If you run into the problem in the video, I also found a solution in the review section of the product's Amazon website (the Q&A section doesn't help lol), it reads: "Had to piece together manual calibration for the label advancement sensor. If you press the feed button or print a label and the printer rolls out half of the next label you need to re-calibrate the printer to the labels so it can see when to stop. 1: properly load the first label so the machine is primed 2: turn off printer 3: hold top button (feed button) 4: turn on printer 5: watch the top lights, both lights should cycle on/off once then the red light will start flashing 6: release the top button (feed button) before the red light flashing stops The printer should now SLOWLY run through a label or two and re-calibrate the feed sensor to find the edge. Now you can open the printer and remove the labels or hit the feed button (possibly twice) to line up the next perforation and tear off. The printer should now be calibrated to the label backer and stop at the correct point after print or feed operation." If you haven't return the printer and there's still time under the return deadline. might as well try! If you try what I suggest, let me know the results if you have time to spare. If you don't want this one, might want to try the Rollo printer (basically the better and more expensive version of this one). Hope this helps!
@carollevine8413
5 жыл бұрын
@@anguyen1920 I am using windows 10 how do I get it to print correctly?
@jianliangguo7689
5 жыл бұрын
@@anguyen1920 Didn't works... you can check, Waste time...
Пікірлер