Youtr bike Will never run again jajajaja jajajaja 😂
@martinmclaughlin1523
Жыл бұрын
Thanks for posting your video. I had a problem with a 125cc quad it would take over with a bit of a splitter and when I gave it the throttle it would die out. The problem was that the little brass main jet needle seat had fell out unknown to me at the time of cleaning the carburettor. Many thanks Martin ☘
@wags9777
Жыл бұрын
There is no fuel that supplied through your slide
@lucasmfl1156
Жыл бұрын
but the needle guide goes form the other side, from the side of the main jet
@kevindauwer2154
2 жыл бұрын
I recently got a big bore kit 80cc and it won’t go as fast as it did what do u think the problem is ?
@pauldixon9626
2 жыл бұрын
Not enough air flow needs bigger carb needs broke in again
@burt1758
7 ай бұрын
Rejet the carburetor.
@erickpeter1806
2 жыл бұрын
Ur putting guide in opposite side bro a bike can't start k
@andrewlowe3155
2 жыл бұрын
Thanks bossman! Huge help
@kme8134
2 жыл бұрын
This is bevok larnie. Thanks
@funfactoryracing1183
2 жыл бұрын
absolutely the WORST editing ever in the history of video editing. WAY too distracting with the sidebars. Use a proper camera (or turn your fucking phone sideways)
@wilsonfaustin3001
2 жыл бұрын
Thank you so much!!!
@leivurjoensen190
3 жыл бұрын
needle seat
@servantoftheservant5022
3 жыл бұрын
I have a zapp gy6 max speed 60km help
@servantoftheservant5022
3 жыл бұрын
Harihariharibol newsubscriber lets c what u got best Johannesburg southafrica
@ralphsmalls2916
3 жыл бұрын
You don't know what you're talkin about the guy does not go there it goes inside of the main jet idiot
@rampampaj
3 жыл бұрын
Do not listen and follow to this amature video if you want to keep your bike running
@vankmen1
2 жыл бұрын
These are $10 carbs. Worked for mine perfectly no more bogging and it saved me a measly $10 to try it out.
@MQuesada
3 жыл бұрын
I will try to do it. Thank you for the tip!
@BeyondTRD4R
3 жыл бұрын
did it work?
@MQuesada
3 жыл бұрын
@@BeyondTRD4R Yes! Sorry for not answering before, I was lazy to dissasemble again. To put some spray-oil, I did not disassemble the whole carburator. I just released all the hoses, and I applied the WD40 through the air admission. Now the bike is super smooth and has a very fast response. Also I think the top speed has increased as long time ago! I have to say that the diafragm was very polished/wasted. The original colour was grey, but due to friction is black in most of it, so this was a good tip. BTW the bike is a peugeot V-clic 49cc. Good luck!
@nobrimnoyankee3982
3 жыл бұрын
@@MQuesada hey dude can you text me on ig step by step , you don’t have to but it would be very helpful. My ig is privv.Lachlan
Пікірлер