ya sure... used it in real life and it was 50/50 hit or miss. not that easy to use with out the wheel jerking or stopping. maybe if the wheel was made of med to harder grade rubber for better traction in the corners.
@powerbylightfutureisnow1579
2 жыл бұрын
Thank you
@LuisRamirez-so1un
2 жыл бұрын
No way it’s faster than just using a shield .
@mikemovila7732
2 жыл бұрын
it is too bad contacted Sherwin Williams and they have no idea what I am talking about. After a long discussion with the rep, they told me they were going to check. After waiting for a while I contacted them back and was informed this this product is not available at this time. too bad.
@edwardtrejo1349
2 жыл бұрын
Great !
@kenking3738
2 жыл бұрын
Truly awesome and helpful tips for spraying...thanks a ton Ty😘
@madbarber1670
2 жыл бұрын
70 dollars for this piece or am I being gouged
@1dariansdad
2 жыл бұрын
Very gouged. Check Amazon.
@brittanycantu2732
2 жыл бұрын
@@1dariansdad You got a link to one?
@madbarber1670
2 жыл бұрын
70 dollars for this piece...or am I being gouged
@user-gk3lu1gg9t
3 жыл бұрын
still a huge 1/4" gap on that wall that you need to cut in anyways
@isaiahmourad6380
3 жыл бұрын
Thank you. Using this tomorrow. Can't wait to try it out
@joeinacio2049
3 жыл бұрын
Looks like a great tool. What happens when you get in the corners of the walls of a room.
@krisbuilder0057
3 жыл бұрын
Super 👌 subskrybuje 👍
@hantan5720
3 жыл бұрын
Amazing thank you sprey guide
@flip0345
3 жыл бұрын
Its going to leave a line of the old paint
@genedillman7811
3 жыл бұрын
What tip would you use with that guide? Maybe a 210?
@age_of_reason
5 ай бұрын
You would need a 102 to avoid any overspray 🤣
@igot5onit214
3 жыл бұрын
Tap makes the Straightest lines hand's down 🤫
@igot5onit214
3 жыл бұрын
Maybe for a outside but I'll stick with Tap and Paper inside
@abdulmatheen2267
3 жыл бұрын
Am from India and Where can I buy this .
@Majiktipz
4 жыл бұрын
What about when you come to your corners?
@stephenreynolds0220
3 жыл бұрын
probably just cut that in with a brush? I know the texture will be a bit off, but I think it should be small enough to not notice or just mask off the corners 👍
@mexicanosenhawaii7534
4 жыл бұрын
Where can I buy this
@nopenope414
3 жыл бұрын
Amazon.com is around $30
@brittanycantu2732
2 жыл бұрын
@@nopenope414 You got a link for it?
@camleatigdad
4 жыл бұрын
does it fit graco guns
@spbhai5272
4 жыл бұрын
I aslo want to know
@nopenope414
3 жыл бұрын
I found one at Amazon and supposedly fits all airless spray paint sprayer..
@aramusholey661
3 жыл бұрын
It sucks
@pikifrino
4 жыл бұрын
PERFECT!. THANK U!..
@angkit216
4 жыл бұрын
Thanks bro
@angkit216
4 жыл бұрын
Wow
@joeygunzilla6878
4 жыл бұрын
I'm definitely interested.. ** IF ** it doesn't cause overspray on the adjacent wall.. anyone know if it does or doesn't?? obviously you need a steady hand to prevent bouncing around which is fine because I've got that part down pact 😉👍 the 1/8" it's leaving behind is perfectly fine and would be a breeze to go back and quickly cut in VS cutting in +3"
@ZappaCrane
3 жыл бұрын
Wondering the same thing. DEF seems too good to be true
@joeygunzilla6878
3 жыл бұрын
@@ZappaCrane it does look really tempting though. I haven't gotten around to buying it.. This pandemic b.s really messed up my business.
@i.george2321
4 жыл бұрын
looks like you put a lot a videos on backwards 0:38. look at the end of the run. you pieces of shit with your guide
@tlrmd4you
5 жыл бұрын
This looks like it might take a little practice of using it, before it would work for me. But boy do I love this idea!! I like all your tips for using it. Do you have to go at a smooth and pretty regular speed when doing this? I can see if you went too slow, paint could get built up pretty easy, not sure, all I know is that I have molding ALL OVER MY HOUSE!!! When I start painting, I would like to have some time practicing this, to use on ceilings, crown molding, walls and all the door ways!! SIGN ME UP!!! Where do I get one?
@socksincrocks4421
5 жыл бұрын
Man, Ty likes to get High!!!
@oukastoukast
3 жыл бұрын
BIg time baked
@whitesheatingairappliancer7101
5 жыл бұрын
The jinwen spray guide from Wagner has a metal disc and is a little different then the one shown here.
@speedway04002
5 жыл бұрын
Looks like its only used on rough surfaces.
@otherZinc
5 жыл бұрын
Would a 413 tip work?
@magicmike6961
5 жыл бұрын
this is bullshit. it always sprays the underside of the cornice.
@seandoyle3251
5 жыл бұрын
Its worth a try
@briang4588
5 жыл бұрын
Junk
@sloanick100
5 жыл бұрын
I used a green 310 FFLP Graco tip. It worked but I need more practice Wish I had watched this video before using it. Has anyone else used the 310 Graco tip?
@andresjesus4983
5 жыл бұрын
I just bought it today... made my day so fun.
@joshuapotter7372
5 жыл бұрын
I'm sold! Take my money!
@gabobracho
6 жыл бұрын
Any pressure level recommendation?
@heavysoul7
6 жыл бұрын
can you use a graco rac x 517 blue tip on this...
@bennyray979
5 жыл бұрын
Jake Millan that’s my question too!
@sloanick100
5 жыл бұрын
Jake Millan I couldn’t do it with a 317 if that helps
@mtuguti
3 жыл бұрын
No you can't , the spray tip is too wide and will throw loads on to your disc
@enconfianza777
6 жыл бұрын
Hi, where I can order a metal disc for the spray guide, I buy one but it is plastic, I would also like to know which nozzle number is used, which is wide and the most recommended. Thank you!
@nopenope414
3 жыл бұрын
Amazon.com
@MrFatalfurry
6 жыл бұрын
can i use a 517 tip on this
@heavysoul7
6 жыл бұрын
I'm asking the same question. ..not getting any help...have you found out if you can or not. ?
@quocanhbui883
6 жыл бұрын
hi. im using this one. its great. i only use 411 and 513. never use 517 or another tips. bc the paint is dropped too much.
@heavysoul7
6 жыл бұрын
Anh Bui how's it working for you...do you get a good clean finish/clean line....also is that the fine finish tips your using....
@quocanhbui883
6 жыл бұрын
Jake Millan its clean finish. its not wide fan. 411 and 513 are small squirts. they not like 517 or another tips.
@heavysoul7
6 жыл бұрын
Anh Bui is it a green FFLP tip? ...
@TheBoomersdad
6 жыл бұрын
This video eliminated " my out of the box " problem using a 211 tip. Hmm, oval pattern? Thanks
@epenaloza52
5 жыл бұрын
Hahahaha I know I bought a 211 as well
@jacksonso3983
5 жыл бұрын
Me too lol
@rednoseroyce
6 жыл бұрын
I think you meant 90 degrees and not 45 but thanks for the tips
@jahga79
6 жыл бұрын
The 411 and 513 are recommended for laquers and varnishes. Does one have to thin interior latex paint for these tips using a 1/2 horse power sprayer with a maximum recommended tip size of 515 ?
@burbingberries6917
7 жыл бұрын
Yeah, but still see an 1/8 of a line on that trim. Thumbs down
@efrainnicolas1350
5 жыл бұрын
I tried it waste of money...
@joeygunzilla6878
4 жыл бұрын
@@efrainnicolas1350 hi.. what didn't you like about it?
@joeygunzilla6878
4 жыл бұрын
Yeah I see that too.. but I think cutting in with a brush for just that 1/8" would be EXTREMELY faster then cutting in about +4" as long as this thing doesn't cause overspray on the adjacent wall.. I'm interested
@efrainnicolas1350
4 жыл бұрын
@@joeygunzilla6878 you get overspray everywhere waste of money
@joeygunzilla6878
4 жыл бұрын
@@efrainnicolas1350 ahh man! that was my main fear if this thing.. thanks for the reply
Пікірлер