Thank you for this video, you had some interesting and useful facts. So, Reaper doesn't allow you to put track metadata on the disc?
@albertorojas6897
Жыл бұрын
Absolutely awesome! Thanks a million for this tutorial, I made everything without undersatanding and it worked. I rewatched the video after finished the job I everything became completely clear. Thank, thanks, thank.
@timswanson8980
Жыл бұрын
Would you recommend this method for mastering just a music track? Say for rock and metal music?
@tomasdabasinskas8977
Жыл бұрын
For everyone who's still watching this tutorial in 2023+ and find it useful and are asking me questions! I haven't worked on surround project probably since I made this tutorial. Reaper has changed a lot, but this tutorial is still valid and everything works. Nariman has proven this in 2023 18th of April. So if something does not sound or mix-down as you think it should it means that somewhere you made a mistake or skipped a step. Anyway - I'm happy this tut helped and is still helping to many people. Oh, and in case you can't find the problem in your routing, try searching harder as asking me for an advice is useless because at this moment YOU understand my routing scheme much better than I do ;)
@narimande
Жыл бұрын
Hello Tomas, It's very helpful! Thank you for this video. But I have some problems about panning after rendering stems, they pan to the left for some reason. And if I pan audio to the right in the project it pans to the center after rendering. Could you please tell me why it's happening?
@3dthings77
Жыл бұрын
Thank you so much
@cyberista
Жыл бұрын
Thank you! Exactly what I needed :)
@Albibertius
Жыл бұрын
Your site is not loading!
@uselessoldman7964
2 жыл бұрын
so Reaper cant mixdown a surround track?
@ASharkwav
2 жыл бұрын
Thx man
@R.E.A.P
2 жыл бұрын
Holding shift and double clicking doesn't work so that I can name the song,any other way to do this?
@mylenekwan2600
2 жыл бұрын
May I know no 2 is which mic?
@paulonatanx4420
2 жыл бұрын
Please help me, how do I export after this point that you showed all in a full 5.1 track, when I select the C Top and C sub it comes stronger, but when it is the master that I export it comes weaker, Please help me. Another thing is that when I only select the stems, the center box only comes from the left side.
@pinchopaxtonsgreatestminds9591
2 жыл бұрын
Mine doesn't have multiple master tracks. Maybe they changed Reaper since this video? I seem to have one master track, and then just regular tracks with FX.
@maxicolection
2 жыл бұрын
Missing samples?
@maxicolection
2 жыл бұрын
repeated samples?
@ElDuderino502
2 жыл бұрын
Does it have to be from a CD? Is there a way to import Mp3s?
@fernetconcoca39
5 ай бұрын
thats what i'm trying to know cause i want to import an mp3 file and idk how
@coreygilbert871
2 жыл бұрын
Was working on a project for my band at 4 am and im half asleep so this was very helpful thank you for being so concise and to the point!
@tomasdabasinskas8977
2 жыл бұрын
Glad it helped!
@secondsofsilence_music
3 жыл бұрын
Good tutorial but I could hear every mouth movement haha
@tomasdabasinskas8977
3 жыл бұрын
That was my intention. Thanks.
@jarrahdrum
3 жыл бұрын
Labas, greetings from Wales 🏴. Subscribed 🙏
@andrewgiddings6240
3 жыл бұрын
EXCELLENT tutorial, thank you. My question is, once I have rendered and the list of tracks is presented, the title of track 1 is blank. What am I doing wrong?
@xyz_chain4199
3 жыл бұрын
Can the pcm be used as a an input microphone for PC if not is there a way around it ,great vid btw
@fidenemini111
3 жыл бұрын
99% of orthodox churches in Lithuania were built in the second half of 19 century after the bloody suppression of the uprising of 1863 as an unsuccessful attempt by Czarist government to russify local Lithuanian Catholic population. This policy was accompanied with the ban of Lithuanian script, closing of Lithuanian schools, newspapers and book printing in Lithuanian Latin letters. Only 3 of Russian Orthodox churches in the capital city of Vilnius are historical, and were built earlier - in 16 and 17 centuries in late Gothic and Baroque architecture styles. All three in 19 century as "looking too European" were "reconstructed" in Neo-Byzanine style thus mostly destroying their authentic look and artistic significance.
@philmcclean
3 жыл бұрын
This was extremely helpful. Thank you very much!
@LaurentLZ
3 жыл бұрын
Hello Tomas, Many thanks for this well-explained tutorial ! There're however one point I struggle to understand : why do you need to send the LFE STEM track to the the LFE TOTAL track ? By monitoring like this, shouldn't the LFE TOTAL track receive two times LFE signal that necessary ? Best, L
@drvnlp6269
3 жыл бұрын
When I burn the CD in put it in my car CD player the track names don't appear. Only the track numbers. How do I get the track titles to appear? Thanks
@brownjovi
3 жыл бұрын
I have a CD duplicator.. burn 5 copies at a time. its kinda cool. I use it in my recording studio. kzitem.info/news/bejne/26BmuWSYp2qVa5g
@Kataklysme666
3 жыл бұрын
Thanks. There is still some *old* people that just asking for CDs in 2021 lawl.
@haroldandrescarrenobedoya3032
3 жыл бұрын
Excelente, gracias
@unterwasserbeatboxer
3 жыл бұрын
Brauner sounds fantastic. Was looking for reviews on PCM D100 which I own and love.
@kevinsmith1644
3 жыл бұрын
Tomas, I tried overlapping a few songs without the sound cutting out(and i set the time between songs to 0ms), but the song still stops at the marker. Any idea as how to make the overlaps not give a break between songs?
@monogongbetenzwar9166
3 жыл бұрын
hi there! thanks for the detailed explanation! with me in reaper 64 on mac i cannot recreate the settings you show around 4:00 in reasurround: whenever i set input channelcount to anything below 6 it jumps back up to 6 after a second. that results in me having 6 times ( i believe the same) channel in the field, oviously very messy to position ... i guess you are not here to answer every stupid question but i would definitely appreciate pointers if someone has any! :) - edit: i found that if i reduce the track channels in the routing options to two i can also select as few as two channels in reasurround, but one is not possible, and according to your instruction i should have 6 track channels, right?
@VortexMotiveVision
3 жыл бұрын
Very helpful, thanks.
@stfncreatormodeon
3 жыл бұрын
My guess: 1. Sony PCM D-100, 2. Rode NT-USB, 3. Brauner RichBich 1. really nice sound, low noise and in over all sound feeling really close to the others 2. I own this mic and yes, for spoken word really nice, but a bit noisy and that's why this is my tip 2. its a little bit more noisy then the others. 3. the brauner has a warm sound and very clear with nice depth was listen to your video with audio technica mt50x headphones which shows me sometimes a bit too much when something is noisy... thanks for the good and entertaining comparrison. keep it going
@hotelsinus
3 жыл бұрын
oke,y this is not working with 5.1 soundcards! in sony vegas its just one click and everything is works awesome fine...
@tomasdabasinskas8977
Жыл бұрын
Sony Vegas is GOD!
@letsgotoystv3187
3 жыл бұрын
#2 seems to have the least saliva sounds. Which one is that?
@MaKAudioGuy
3 жыл бұрын
Jesus dude. Drink a glass of water or take the microphone out of your mouth!
@tomasdabasinskas8977
3 жыл бұрын
Never!
@INeverWanted2010
3 жыл бұрын
Hey dude, thanks for this tutorial BUT do you have any suggestions on what to do when the inserted file displays as "OFFLINE" and won't play any sound?
@kikiwritings
2 жыл бұрын
that's what's happening to me aaaaaa
@INeverWanted2010
2 жыл бұрын
@@kikiwritings Hey, so what you have to do is make sure the file is an MP3. M4A etc won't work. There are free websites out there that will let you convert your files to MP3. Once you do that you should be able to drop it in and it'll play just fine. Let me know if you get it working, good luck!
@kikiwritings
2 жыл бұрын
@@INeverWanted2010 omg thank you so much! i just searched for videos on how to do this, i hope it'll work!:)
@kevinssolaradventure284
3 жыл бұрын
Thank you Tomas.
@onzkicg
3 жыл бұрын
Apogee 96K vs MXL V67G? Thanks 🙏 Btw, one index finger distance is about 4” approximately.
@pascalmorgan8722
3 жыл бұрын
Nice review! Thanks for that! I would like to know if the optical line out gives the signal out while mics are actve (lets say record ready)? So my question is if i could use the mic of the D-100 and record the signal through the line out into my Studio recording system?
@tomasdabasinskas8977
3 жыл бұрын
Thanks! That is a tough question, since I don't own the PCM-D100 anymore. Under this link you'll find my research on ADAT cable length where PCM-D100 was used. www.tomasdabas.eu/reviews/does-adat-cable-length-matter/ In the intro I mention that I used Sony as a talk-back mic. I THINK, I recall using my PCM-D100 as a talk-back mic for quite a while. Sooooo, I guess my answer to your question would be YES, you can use Sony's internal mics, whilst transferring the data trough the optical out into optical input of your audio interface.
@pascalmorgan8722
3 жыл бұрын
@@tomasdabasinskas8977 Thanks very much! Also nice info on that article!! very helpful all of it!
@Studio_Papillon
3 жыл бұрын
Thank you for the upload quit useful , im thinking about the Sony PCM-D100 i guess it's practically and flexible for some situations in my channel i use 2 mics one for my guitar and one for the voice so i have more possibility to edit my audio perfectly as i want so do you think the PCM-D100 can handle my case i mean guitar and vocal?
@tomasdabasinskas8977
3 жыл бұрын
Hi, thanks for watching. I checked out some of your latest uploads and in your situation I wouldn't change a thing and forget the Sony. But if you're really want to refresh your gear, I'd probably suggest to look at the newer Sony PCM D10, or something from Zoom's headliners. You most certainly will benefit from the XLR inputs in my opinion.
@erwanmirabeau6751
3 жыл бұрын
Thank so much for this great tutorial! One thing to notice though : the reasurround has changed since this video was released resulting in no sound (when performing the dialogue test) cause the dot n°1 is out of range : don't hesitate to move it INSIDE the rectangle 12356. Also there is a new setting inside reasurround wich works best is to set "speaker influence" to relative.
@tomasdabasinskas8977
3 жыл бұрын
Thank you for your remarks. I believe this is so old, I should already delete it. Few years ago YT allowed annotations, so I made lots of those, because depending on your speaker setup, not every step is necessary. Now everyone must watch the whole tut. Oh well...
@erwanmirabeau6751
3 жыл бұрын
@@tomasdabasinskas8977 NO! This is a very good tutorial! Nothing is easy in real life! I m very new to Reaper and Surround mixing but it helped me a lot! Thanks mate!
@franklinpanakkal97
4 жыл бұрын
Preserve Christianity, even I follow orthodox Church from Asia .Europe in mess and so it America. We have new threats rising and trying to destroy judeo christain culture.
@franklinpanakkal97
4 жыл бұрын
Lithuanian please bring children back to churches. Pls start apologetic missions.
@bigbarkingdog2010
4 жыл бұрын
Got bored. No info. Why bother. Website. Right. Like I don't have a life, wife and kid.
Пікірлер