schönes Spielzeug, schade das mann das nirgends kaufen kann
@patrickehrich3293
Жыл бұрын
hello is there still such a rin truck to buy and how much does it cost then?
@pascalsussek9887
2 жыл бұрын
Where did you Buy this
@gdsteven7566
2 жыл бұрын
wow nice creation
@Steve1766
2 жыл бұрын
mercedes LP
@recycleman975
3 жыл бұрын
where can i find one ?
@recycleman975
3 жыл бұрын
i love mercedes NG
@Steve1766
2 жыл бұрын
me too
@patrickehrich3293
3 жыл бұрын
Hello i want buy this how can i find this truck and how much does it cost thx
@patrickehrich3293
3 жыл бұрын
great how can i find this truck and how much cost this i habe not find it on ebay or amazon greetings
@planesteve
3 жыл бұрын
Very cool
@Aidea-fn3zu
3 жыл бұрын
Your self?
@Aidea-fn3zu
3 жыл бұрын
Nice video my bro
@Aidea-fn3zu
3 жыл бұрын
Cool video my bro my new video How to make garbage truck from cardboard
@MrPegman02011
4 жыл бұрын
its so modeled
@MrPegman02011
4 жыл бұрын
it spins like a cement truck
@recycleman975
3 жыл бұрын
yes
@kostasvaitsis8590
4 жыл бұрын
Most amazing refuse truck model ever seen!!!
@Martindyna
5 жыл бұрын
Nice video. I find it difficult to understand how these trucks can compact rubbish effectively apart from the initial stage if it's too big to go in; does the passageway get smaller for 360 degree of the `entrance auger' / channel and then once in the drum the rubbish is just tumbled or am I missing something? The Faun video of their Rotopress doesn't really help me. Faun claim these trucks to be economical on fuel which I find hard to believe.
@callmek.01
7 жыл бұрын
so this is what's inside the roto
@v.erdemdogan7556
7 жыл бұрын
Very good idea
@v.erdemdogan7556
7 жыл бұрын
How much money is this toy rubbish custody and how it yields
@joshlynn3674
7 жыл бұрын
How much for the truck????
@LaurenzEdelman
8 жыл бұрын
I remember these from when I was a little child. I found it truly fascinating. The brute force with which it crushed just about anything was mind-blowing to a 5-year-old. Great work!
@picobyte
9 жыл бұрын
Always wanted one,Always watched when the real one came to pick up the trash :)
9 жыл бұрын
Great Job.
9 жыл бұрын
Its so cool. Gteat Job.
@sepplina
10 жыл бұрын
schönes Spielzeug, gibt es heute noch sowas zu Kaufen ? wenn ja wo?
@subaru2492
10 жыл бұрын
Hi, where you bought it? Thx :)
@judgedredd9574
11 жыл бұрын
THIS IS VERY GOOD IS THIS THE 1838 OR 1850?
@shaun432
11 жыл бұрын
Looking good. Great sounds too.
@SeRefuseTrucks
11 жыл бұрын
Thanks for the info! I am looking forward to your upcoming videos. My own Project is virtually finished, will upload videos soon.
@TheStukaBomber
11 жыл бұрын
Link to buy?
@KuKa215
11 жыл бұрын
The KuKa' s drum is 2cm bigger in diameter, cause of the conical shape. The hole where the trash goes into is also bigger. I have to say that the Faun works better. This video is the first testrun, and the drum was not even properly connected to the chassis, the next video will show better results.
@SeRefuseTrucks
11 жыл бұрын
So, which type of truck do you think works best? The rotopress shape of the drum, or the kuka with it's conical shape?? In this video it seems to have a Little trouble "pulling" the waste in.
@SeRefuseTrucks
11 жыл бұрын
Ok. :-) I have had some thoughts about building a M-U-T Rotopress. But then I would probably use a servonaut motor for the drum, reduced by a chain drive. Really interesting to watch how your work progresses. Would be nice if you could make more videos so I can see how well it handles different kinds of "waste" =)
@KuKa215
11 жыл бұрын
I guess the power on the helical vanes is about 5 kgs, the motor is ahacked 25 kgs servo, not as strong as the KuKa 215G which has a worm driven reducer
@SeRefuseTrucks
11 жыл бұрын
Nice! 25Kg you say, so how much force on the periphery of the drum?
@erikloggen6340
11 жыл бұрын
super mullwagen
@thevuilniswagen
11 жыл бұрын
dag Bas. ik vind dat je SUPER mooie wagens maakt! nu ik hierboven lees, dat je er geen maakt, voor de verkoop, wil ik best zelf zo'n wagen maken, maar een 14 jarige weet niet precies hoe dat moet! zou je mij kunnen vertellen hoe je zoiets maakt?
@TETOYVIENDO
12 жыл бұрын
Wow... great job!!! it look fantastic!!!
@KuKa215
12 жыл бұрын
The truck itself was about 400 euro, and the materials were about 200 euro's. I still need 4 servo's, a multi function unit and a transmitter, that will be another 400 euro's. Complete this truck will be about a 1000 euro's for the materials. The Tamiya parts are the most expensive.
@KuKa215
12 жыл бұрын
I think Siemens Fujitsu even deliver the parts for the KuKa robots these days.
@SeRefuseTrucks
12 жыл бұрын
@KuKa215 If those were your goals, then I would say that you have succeeded :-) Interesting info regarding the motor. I have looked around a bit and no R/C motor I have seen so far will be able to produce the torque you have reached at a reasonable RPM. Will be interesting to see it when you have added the bigger battery-pack.
@KuKa215
12 жыл бұрын
For me it was the most important that it really looks and works like the real thing. First I used a Tamiya 1:16 tank gear and motor, but it was way to weak for the big diameter. The modelling shop were I'm coming, just bought some heavy duty motors with metal gears used for self lifting hospital beds. The motor I used is made by Siemens and has a screw driven gearbox with ballbearrings.
@SeRefuseTrucks
12 жыл бұрын
@KuKa215 Ok! That sure sounds solid enough :) Yes I have seen those claims. And the only way he could have achieved that force is if the cylinders are custom built. At a pressure of 15 bars it would require two cylinders with a piston diameter of 18mm each. Leimbachs biggest standard cylinders have a 16mm piston diameter, and the ones I use are 12mm. he could be running the pump at a higher pressure, but that would void the warranty on the components.
@KuKa215
12 жыл бұрын
It could destroy itself if you put something solid inside. But the truck does'nt break easy, al the parts in the hopper and hinges are made of metal and thick laminated plastics and glasfiber. The drum is made of a 6 mm thick p.v.c. sewer pipe, reinforced with a metal mesh on the scoops. The guy who made the Schorling 2R, claims a pressure of 80 kg's on the Leimbachs.
@SeRefuseTrucks
12 жыл бұрын
@KuKa215 That is indeed a lot of power, probably much power enough to rip the truck apart since it is made of plastic! No, my model has just a little above 30kg of pressure when the packer plate is travelling downwards. The piston diameter is 12mm and the pressure is 15 bar. A pair of the biggest cylinders in Leimbachs standard assortment gives the force of 54.2 kg at 15 bar.
@KuKa215
12 жыл бұрын
It will be the power on the scoops in the drum. But the Leimbach hydraulics in your Norba gives 80 kg' s of pressure. That's almost 3 times more power.
@SeRefuseTrucks
12 жыл бұрын
@KuKa215 Thanks for the answer! 30kg sounds like a lot! Is that the torque on the outer diameter of the drum?
Пікірлер