When I go to the computer chip the Tcm does not sho up on my list? I’m using forscan v 2.3.62? Any ideas?
@andreschroff
14 күн бұрын
Hi, why can not found in the ForScan , left side by the "Cpu-Symbol( Configuration and programing " not found the TCM? I will program my new TCM. When i switch to Service and Car test, i see the TCM and i can make test, but i cant found the TCM in the configuration&programm. Please help me ;)
@michaelgadoua
4 күн бұрын
You need version 2.4 to program
@andreschroff
2 күн бұрын
Thx, i have now buy the one year licence and have the 2.4.12 beta version :)
@ITavares
Ай бұрын
On minute 6:21 when you click “computer chip” my TCM doesn’t show on the list I don’t know why
@jorgeruelas9369
Ай бұрын
MY FRIEND I HAVE PROBLEM ...YOU WERE ABLE TO SOLVE IT
@tselishchev72
Ай бұрын
I dont have TCM Under configuration and programming
@MrJoegom74
28 күн бұрын
I’m having the same issue, anyone know why??
@andreschroff
14 күн бұрын
I have the same. I dont know why. Help me
@tselishchev72
14 күн бұрын
@@andreschroff they got not the newest update. It is Different forscan
@chinthakafernando4665
2 ай бұрын
HI there, I saw your video on youtube about TCM programming . So i got a few ford fiesta tcm and mazda 3 tcm. How can I test if they are programmed properly and if they need any programming how can i do it. I can buy the hardware and softwares needed. My biggest concern is how do I diagnose/ program the tcm without fitting the tcm to the car. I saw a lot of videos on youtube where they plug the J-box to the car to diagnose/ program. I would be happy if you can help me out to .
@t.fisher5123
2 ай бұрын
Hi, I have not been able to find the Beta that gives access to the programming of the TCM. Do you know where I can find it? Any help would be really appreciated . Great video by the way, it's the only reason I decided to do this myself.
@trecrowley1205
3 ай бұрын
Could I use this to program a Ford fusion 2016?
@adamkit1091
5 ай бұрын
When I was downloading the firmware there was error. How do I fix it?
@maniimran4758
5 ай бұрын
Thank you ! I thought only IDS expansive deal was the only way to program a 2012 TCM module. This saves a lot of money and time. ids License too expansive.
@rosidus
6 ай бұрын
Hello, How do you know what software version to choose when updating the TCM?
@dealerauctionnightmare4689
7 ай бұрын
Do you have to use the beta software?
@alexouchakov1423
7 ай бұрын
When I press download it says: Downloading AE8P-7244-AB: Not available under trial Extended License Downloading FV6P-73104-GE: Not available under trial Extended License
@tompeacock9193
6 ай бұрын
got to buy the licence - like 20 bucks australian
@danielleobatalon1103
7 ай бұрын
I have also vgate vlinker FS why there is no TCM programming in the programming tab? Can you help me with this??
@arthurmcquoid9419
9 ай бұрын
Hi Drew, I have a right hand drive 2014 Mondeo powershift X Sport, would you know if the same process would apply. Many thanks
@eduarddavid2878
10 ай бұрын
How can I get the reprogram my new tcm if I don’t have access to the old tcm anymore ? Any advices ? Thanks.
@johnnylites
3 ай бұрын
Did you find out? I have the same problem!
@leeshtc
10 ай бұрын
Got it done! Appreciate the video!
@juankmoyano1189
10 ай бұрын
This is the best video. Thank you
@gcposeidon0800
11 ай бұрын
Thank you very much for creating this video!!
@czarreyes186
11 ай бұрын
Hi can I get the email of Forscan team? And hiw much will it cost to have a forscan license?
@mgkl8465
11 ай бұрын
complete BS link is dead Forscan is BS proram wh sells copy a bad copy of ids and obdwiz with $10 simple reader that claim free software this sofwatware is FRAUD FORSCAN IS FAKE AND FRAUD MOVE ON TO ANOTHER OPTION SAVE YOUR TIME
@tgbgndz7790
11 ай бұрын
Forscan doesnt have TCM access for this mdels , there is n separate module Forscan supprt claim it is added to 2.4 windows version but their support and forum membership is horrible invitation only etc. Basicly do not spent $200 on regualr obd reader mx+ or obdlnk etc plus forscan go ot local mechanic shop it is 20 minutes $100 Forscan sucks support is rude,
@MartinNovakosky-my1rr
11 ай бұрын
Any one knows if this is the same for a 2012 Ford Ecosport with the same automatic transmisión DPS6 power shift and the same TCM MODULE ?
@mgkl8465
11 ай бұрын
@mgkl8465 1 second ago all others like settings dtc or vehicle menu TCM module is there but when click software chip icon no TCM ? Anyone know why?
@mgkl8465
11 ай бұрын
weird 6:35 no tcm udate menu at forscan (paid version) ????
@petetan6782
Жыл бұрын
Great vdo , I will try with the 2 messed up cars that I have ! Thanks
@Kimsen21_Zomi
Жыл бұрын
I got 2013 FOCUS SE replaced the TCM still not show where the GEAR at so if i do Program that will help?
@johnyw3791
Жыл бұрын
Hello. I have a program in version 2 3 55, but in programming I do not have the tcm option, do I need a newer version 2 4?
@darielmcgrue3118
7 ай бұрын
Ever got an answer? I'm having same issue.
@johnyw3791
7 ай бұрын
@@darielmcgrue3118 version 2.4 beta with license discovers tcm. But the servers are down and tcm software cannot be downloaded
@apinyadoungsoil5284
Жыл бұрын
I can not download v.2.4
@znegahnquet1031
Жыл бұрын
If I get a TCM from a salvage/junk yard do I have to do any type of flash/reset on the used TCM before/while replacing it, or could I just do all steps you do?
@drewlubka9689
Жыл бұрын
The steps listed will get you where you need to go. If it’s the same model (focus vs fiesta) and close in year you could possibly skip the programming and just do adaptive learn. But it won’t hurt to do the whole process. Just be careful with junkyard TCMs. Dying batteries kill TCMs frequently and most cars in junkyards have dead batteries from sitting. If you get the TCM to work at all, you’ll be lucky if it lasts you more than a few months. I’d advise you to just bite the bullet and get a rebuilt dorman unit with a lifetime warranty. After my junkyard TCM failed I went that route. The dorman one has had some iffy symptoms after about 8 months and it wasn’t too much of a hassle to get it replaced if they’re in stock.
@znegahnquet1031
Жыл бұрын
Okay thank you, I just replaced the TCK this morning, and I got a code U0101 and said IPC no communication to TCM. Will the program fix this or could it be something else?
@dealerauctionnightmare4689
7 ай бұрын
I have never had to do a reprogramming of a used TCM, I just had to do the adaptive relearn.
@doeboy319
Жыл бұрын
How can I find the hardware ID?
@doeboy319
Жыл бұрын
Update for anyone wondering the same. You get the Hardware ID from installing the software first. Homescreen will display the hardware ID, just copy paste it
@JoseRamirez-qb8tr
Жыл бұрын
Do you have the link for forescan 2.4.6
@piotr19453
Жыл бұрын
Hi Does this procedure can be used for mondeo mk5? Thanks
@josegarcia-th3pj
Жыл бұрын
there's a way to use for scan with a vgate feps flash EEPROM and if it is how you do it
@hernancornejo1989
Жыл бұрын
Hello dear, good morning, I am from Argentina, I bought a remanufactured and programmable TCM kit for a ford focus, my auto technician cannot program a new VIN in the TCM so that it works in the ford focus. What can be the solution? Thanks in advance for your time
@francoisoosthuizen6663
Жыл бұрын
Hi Drew. Can Forscan 2.4.6 be downloaded from any other source than Forscan?
@francoisoosthuizen6663
Жыл бұрын
It appears that, if you don't have the Forscan software installed, you cannot obtain the "hardware id" and are therefore "stuck". My question please....Can one download this Forscan 2.4.6 beta for free and then get the free extended license for it?
@erkfilms7026
Жыл бұрын
Good morning everything is fine? If the old TCM is without communication, would it be possible with Forscan to program a used TCM?
@Cubanogar
Жыл бұрын
Bro, it worked beautifully, with the 2.4.7 version
@Sequence322
5 ай бұрын
Do you by chance still have the 2.4.7 installer? It looks like they killed all the links. The only place to get it apparently is the forscan forum but you need an invite code for that.
@ztezte4947
Жыл бұрын
step 4 replace with another used one, it can be done, because when I download the old module it doesn't download the file and that's where your video ends saludos
@biangk9538
Жыл бұрын
Hello , Can you help share forscan v2.4.6 ? The links below is not dowloading
@drewlubka9689
Жыл бұрын
See the top pinned comment. You will now have to contact forscan directly to receive the download link.
@jonmullaly7497
Жыл бұрын
👍 👍 👍 👍 👍 👍 👍 👍 👍 👍 👍 👍
@MikeW0291
Жыл бұрын
Man you are my hero ordered the adapter and paid 12 for a year of software uploaded the firmware and followed the directions of the software and got it up running and saved a bunch of money in the process. Without this video I would of never thought to do it my self.
@mgkl8465
11 ай бұрын
all others like settings dtc or vehicle menu TCM module is there but when click software chip icon no TCM ? Anyone know why?
@MikeW0291
11 ай бұрын
@@mgkl8465 are you using the beta version? You have to use the beta version to do the programming.
@alexouchakov1423
7 ай бұрын
@@mgkl8465did you find the issue?
@thatonemfcka6903
Жыл бұрын
Do you think I could program a used fiesta tcm into a focus?
@drewlubka9689
Жыл бұрын
Yes it can be done
@mauricio265
Жыл бұрын
hi i need to unlock new fiesta limiter, is it possible by forscan?
@thatonemfcka6903
Жыл бұрын
So you have to text Forscan for the beta software to program the TCM?
@josegarcia-th3pj
Жыл бұрын
why you skip the driver installation
@dankollars4501
Жыл бұрын
thanks for your great video. i know your busy but im hoping you can answer a couple questions for me. 1. when i click the computer chip the TCM is not on the list at all, so i cant update anything. 2. i was able to run the adaptive learn program just fine to a point. When i get to (shift drum adaptive learning) its says ok, but the very next one (select gears) the program hangs up, the percentage bar will go to 100% then back to 50% over and over. after about an hour of it doing this, i just shut it down. do you think this is a transmission problem or tcm problem? the tcm is still under warranty but if i bring it to the dealer and its the transmission they will charge me 300 just for the diagnostics. i can get a transmission for 150 at the salvage yard, so i really dont want to waste $300. i would love your opinion, thx
@drewlubka9689
Жыл бұрын
Make sure you’re using the 2.4.X (I think its 7 currently) beta version to be able to program the TCM. As far as the other issue goes, it could be an issue with your TCM but it’s hard to say. Did you replace the TCM and are trying to program it or is this the original TCM and you’re trying to correct an issue with it by programming it?
@impalalover162
Жыл бұрын
I guess the better question is: Can I program the TCM doing all the learning steps for a 2012 Focus using FORscan 2.3.53 or does it have to be at least 2.4.X? Thanks for the help.
@drewlubka9689
Жыл бұрын
You may be able to do the adaptive learn with the standard 2.3.X version. I know for sure you can’t do the full programming unless you have the 2.4.X beta version.
@alialghrary
Жыл бұрын
Yep that what happened with me, I downloaded v2.3.56 that doesn't have TCM with programing ...so sad and now v2.4 is just for paying members only couldn't find one free
@impalalover162
Жыл бұрын
Hi. Can the programming of the TCM be done with FORscan version 2.3.53?
@brandonhooker4498
Жыл бұрын
There’s a drive cycle also involved when performing the adaptive learning, it’s in the repair manual. NOTE: The following steps are for Drive cycle. NOTE: If a drive cycle is not completed, the customer may feel erratic shifts and driveability concerns. NOTE: To perform drive cycle, drive the vehicle on a level road surface. 1. Depress vehicle brake pedal (do not use parking brake). 2. Shift to Drive. 3. Wait 15 seconds. 4. Shift to Reverse. 5. Wait 2 seconds. 6. Repeat (1-5) ten (10) times. 7. Accelerate from a stop with light throttle to 15 mph (24 km/h). 8. Brake gently to a complete stop (allow at least 6 seconds). 9. Repeat steps (7-8) five (5) times in dealership parking lot or similar setting. 10. Accelerate from a stop with light throttle performing 1-2, 2-3, 3-4 shifts maintaining 1700-2000 rpm. 11. Accelerate to a speed between 50 mph (80 km/h) and 65 mph (104 km/h), achieve 6th gear, keep throttle steady with engine below 3000 rpm for a minimum of two (2) minutes. 12. Repeat step 11 two (2) times. 13. Test drive the vehicle.
@tomasmendezpimentel
Жыл бұрын
There is no need unless the clutch touch point test fails
Пікірлер