Im putting a comp Cams Big Mutha Thumpr Retro-Fit Hydraulic Roller Camshaft and Lifter Kit Lift: .533"/.519" This weekend on my 82 c10😊😊 they might divorced me after that thanks to u..but as long as i keep the truck she can keep the cats 😂😂
@billyfoster3223
2 ай бұрын
Great V-8 sound! Cheers, dude!😁👍🔧🛠️
@Dusto-qz1hz
3 ай бұрын
I have never heard it called a “chev”
@OGCambo
3 ай бұрын
We Australians shorten everything. Chev is a pretty common way of saying it down here.
@Dusto-qz1hz
3 ай бұрын
@@OGCambo fair enough
@dontrezjones5215
4 ай бұрын
This just made my day. Definitely putting this in my 81 c10
@badstimpy
4 ай бұрын
Sounds like a completely different engine ! Does she fowl plugs much now ?
@keithcornell3173
5 ай бұрын
great video.im in the process of deciding which cam to put in my 305.i really like the sound..thanks
@gordocarbo
5 ай бұрын
Great looking truck A higher stall would help your truck so much! Its a plus not a minus. Not a fan of those cams at all but no negative stuff coming from here. Super clean ride
@slambergang
5 ай бұрын
Did you have to swap valve springs with the new heads?? Looking to go for this same setup
@OGCambo
5 ай бұрын
Yep, they were in the kit I bought that is shown at the start of the vid.
@Ren-fx5ti
7 ай бұрын
Trying to figure out the motor for my 64 C10 so this has me way to excited
@MIke-ob5lx
7 ай бұрын
What did you set your timing at? Initial and total?
@openshot
9 ай бұрын
So stock block with bolt on and cam?
@clintjohnson4947
10 ай бұрын
Nice truck
@jamessignorelli852
11 ай бұрын
First off , its nice to hear from across yhe pond . The cam sounds radical for avarage street use, is it or not . Im not concerned about economy but how long the cam and engine will last
@blakedavis4549
Жыл бұрын
Wanting to do this same kit In my 78 k10. Summit racing says you “might” have to modify the head at for new valve springs and measure for new pushrods? Did you have to do any of that? Thanks man!
@justinkorpela7955
Жыл бұрын
Beautiful truck sounds amazing
@chawalitD
Жыл бұрын
Hey mate, how does this drive with the stock converter? Did you have any issues with low vacuum for the brakes?
@DANTHETUBEMAN
Жыл бұрын
your paint color is so GOOD. 😎 Great truck. nice job.
@DANTHETUBEMAN
Жыл бұрын
The new THUMPR cam is helping sweep your garage floor 😁 how does it pull down low RPM?
@yanni2112
Жыл бұрын
get that green battery in a black box, the rest of the engine bay is awesome
@OGCambo
Жыл бұрын
It has matching Optima red tops now.
@JimBronson
Жыл бұрын
That was a huge change. Not sure I would have gone that far, but hope you're enjoying it!
@danielwalker3319
Жыл бұрын
Beautiful truck, sounds great!
@user-hl7vg7wk2z
Жыл бұрын
Good sound I had the same in my 70 c10, thought it was fast, ran against a 72 ford he had 390 w Comp 268H f’d around and found out, I was all show and no go too much lobe seperation on the thumper to perform
@earlyhemibill
Жыл бұрын
Do you know how many degrees the intake valve opens before top dead center?
@ataikonotatsujinplayer2610
Жыл бұрын
I was at the same concert just on the 14
@DaveWhoa
Жыл бұрын
damn, you know you've made it when The Offspring is doing a cover of your song!
@zachnickles7655
Жыл бұрын
Any issue with vacuum for power breaks?
@OGCambo
Жыл бұрын
I'm running a front disc conversion.
@zachnickles7655
Жыл бұрын
@@OGCambo I have factory front disk in my 89 I’m assuming I should t run into break vaccine issues then.
@karrs42901
Жыл бұрын
whats up man. Its been about 6 months. Any issues with muffler delete? Any lights on the dash?
@OGCambo
Жыл бұрын
no issues to date.
@LifeWidBlack
Жыл бұрын
That bitch sound good
@ngaire-jasminbarrett5096
Жыл бұрын
i was at this show! so good 😻
@brucedevrous6993
Жыл бұрын
Sounds great, How is it on the road? Any vacuum problems for brakes?
@ClapDemNalgas773
Жыл бұрын
Did you do just camshaft? Or lifters and all
@OGCambo
Жыл бұрын
didn't do lifters. my tuner said it wouldn't be required because it's a pretty mild engine. I only added what is highlighted at the start of the video.
@C10chevy85
Жыл бұрын
Did the new cam make the exhaust louder or is it just the camera position? Sounds great!
@OGCambo
Жыл бұрын
I think a choppier idle makes that sound more prominent. Not necessarily louder
@C10chevy85
Жыл бұрын
What does the rpm drop to when going into gear? I think it sounds amazing!!
@dansmart3874
Жыл бұрын
This was so good! Noodles is the man!🤘
@johniesmith7672
Жыл бұрын
Like everything about it except the b******* ugly headlights
@Eh_foxy
Жыл бұрын
Amazing 👏
@diogom9480
Жыл бұрын
Damn Noodles can sing!
@gusritchie9396
Жыл бұрын
How good was it 😍😍😍
@OGCambo
Жыл бұрын
Loved it. Unfortunately not enough of the crowd knew the tribute was taking place and didn't recognise the song.
@Bbirks
Жыл бұрын
Fuck yeah. Don’t think they did this at the Perth show. Would’ve been killer
@bulletslime5704
Жыл бұрын
@@Bbirks pretty sure they cover a band from the state they play in each show, so a perth show would cover a band from WA, etc
@Bbirks
Жыл бұрын
@@bulletslime5704 yeah I don’t know, I actually can’t remember if they covered a Perth band too many 🍻
@tommywaters2654
Жыл бұрын
Dam good looking ride
@brandongarza7939
Жыл бұрын
Hi Steve! Quick question for ya, what bucket seats do you have in your truck and how’s the leg room? I’ve been looking at different seat setups and I like yours overall.
@OGCambo
Жыл бұрын
They're just cheapies for now. Bit firm, but can slide forward and backwards - www.autotecnica.com.au/ss65
@70torinogt70
Жыл бұрын
Nice truck dude i got 1980 c10 with 78 front clip shes sweet
@70torinogt70
Жыл бұрын
Nice that how i want mine to sound like
@joshramirez853
Жыл бұрын
I was told by the guy at summit that I couldn't put a thumper cam in my stock 96 sierra...5.7... its this true... I'm wanting a cam for it I want a nice sounding like but don't know how to choose a cam
@OGCambo
Жыл бұрын
Email Comp and ask them. That’s who I used for advice before proceeding.
@theungoliant9410
Жыл бұрын
Summit guys don't really know. Remember, they sell parts for damn near everything. They can't be expert for it all.
@stevenskeeterla
Жыл бұрын
You just deleted the cat is that factory exhaust?
@OGCambo
Жыл бұрын
Muffler delete as shown in the footage. Both cats still on the back of the headers
@big_daddy_pp
2 жыл бұрын
Looks great bud, nice little chop from that cam, makes it sound like it wants to party
@rtd6840
2 жыл бұрын
are you able to send me a link to this exact kit
@SOLDOZER
Жыл бұрын
How lazy are you?
@parkeedge9655
2 жыл бұрын
Did you have to change the converter
@chrismooney5737
2 жыл бұрын
Definitely made a big difference
@greenboyatgafarms2250
2 жыл бұрын
You need a stall converter really bad. It would definitely help that idle when in gear probably about a 2800 stall converter would work
@billyjalufka2567
2 жыл бұрын
That's exactly what I wanted to know. Great video. And a very nice sounding truck.
Пікірлер