10 grand plus a little over a grand for the roller attachment.
@Mr_Chuckles
Күн бұрын
Lovely :) And this answers my other query re. magnetic bed.
@Mr_Chuckles
Күн бұрын
Do you have to run it every day to keep it flowing smoothly? That's always been my major gripe with these printers, very high maintenance...
@jasminehuynh4413
8 күн бұрын
how long does it take to print one?
@PrintBestie
2 күн бұрын
i printed a set of 3 and it took about 18min. I tried another set of 5 to fill up whole the bed (printing area) and it took the same amount of time on High Quality mode. Standard mode estimates 8min. Hope that helps!
@jasminehuynh4413
2 күн бұрын
@@PrintBestie thanks, I was thinking to buy one but the price is quite high to start with, Epson just announces their new desktop version and wondering if it's better in price and productivity.
@bensonpeculiar
10 күн бұрын
These videos are great! Do you feel like not having the gloss ink on top has been an issue, or do you not miss it?
@PrintBestie
9 күн бұрын
I haven't needed gloss yet. But yes, I do miss it!
@StickerFab
12 күн бұрын
I saw your other videos and was going to ask how the maintenance was :-).
@MetaAlmighty
16 күн бұрын
Odd request: could you print on a LEGO minifigure or do a small design on a LEGO brick?
@PrintBestie
9 күн бұрын
Not an odd request at all! I'm looking forward to printing on brick soon :)
@MetaAlmighty
9 күн бұрын
@@PrintBestie Would you be able to showcase the printer’s resolution capabilities on the piece? I want to see how detailed it can get at such a small size.
@Ira-117
19 күн бұрын
Completely new to UV printing so I bough this printer to learn, this video is very helpful! Thank you so much, you earned a new subscriber, I hope to see more videos on the bd8 in the future
@PrintBestie
9 күн бұрын
Glad it was helpful! Thank you :)
@reytrinidad809
19 күн бұрын
I really like the results, and how you did the file
@PrintBestie
9 күн бұрын
Thanks! I do like to tinker around with different effects
@miketheprintman
23 күн бұрын
Came out awesome! How much was the ink cost for something like this?
@PrintBestie
9 күн бұрын
The software shows the ink usage and then you do some math based on how much you purchase ink. I'll update you once I compute it :)
@miketheprintman
28 күн бұрын
Those came out looking beautiful. Does the template ink wipe away from the pad or do you have to replace the pad? Thanks for sharing.
@PrintBestie
26 күн бұрын
thanks! I've tried to remove the ink from the template with the cleaning solution but it does not come off well. I've been printing on top of each template and flipping around lol. But I plan to buy another pad, not the exact same but something cheaper and replaceable that still gives it some resistance
@briannajazmin7144
28 күн бұрын
Thank you thank you thank you! 🙌
@PrintBestie
28 күн бұрын
you're welcome :)
@cedriccopin1885
Ай бұрын
Thank you for the video. Is there a chance for you to create a video on decorating a wine bottle 360, please ?
@PrintBestie
Ай бұрын
Hi there, this printer won't be able to fit a full sized wine bottle, but perhaps one of those mini liquor bottles which I can try out
@cedriccopin1885
Ай бұрын
@@PrintBestie Thank you so much.I am curious on the positioning of the bottle. For example, if you have 200 bottles to print , how can you ensure they are always in the same position? Usually, a glass bottle will have a LUG ( notch ) , the lug should be in the back and the deco in the front , how does that work..
@philrodenbeck6424
Ай бұрын
I’m curious about using one of these for low volumes of watch dials, but the alignment of the print area with the dial blank would need to be pretty precise. Is there any alignment method beyond eyeballing it with the laser?
@PrintBestie
Ай бұрын
For that I would get a jig built that holds the dials. That way you'll get much more accuracy and you can do multiple at once if you need to
@philrodenbeck6424
Ай бұрын
@@PrintBestie thank you so much for the helpful reply!
@Mr_Chuckles
Күн бұрын
@PrintBestie Along those lines, is the table steel ie. could one use magnets to affix the jig? If not you could prob put a magnetic-friendly plate there and then affix items as well (eg. your lunch box could put strong magnets inside)
@alvarohernandezEVO
Ай бұрын
Have you done some scratch teat after printing? I tried the machine at a tradeshow, and the ink came off from the acrylic every time.
@PrintBestie
Ай бұрын
The ink stuck onto these specific acrylic pieces really well though I’ve only scratched with my nails and nothing else. I have another video with a shot glass and that one scratched off a bit, but only the area that was unleveled - and not using primer. Im still new to this machine so more tests coming!
@alvarohernandezEVO
Ай бұрын
That's good to know. Thanks
@xtnayrod
Ай бұрын
Turned out really nice this printer can print texture ?
@PrintBestie
Ай бұрын
If you print multiple passes the ink does build up for some texture, but not a whole lot. Would make for an interesting video :)
@briannajazmin7144
Ай бұрын
It came out so cute!!
@PrintBestie
Ай бұрын
Too cute! Good thing I printed two so they have each other 😂 🐠
@mgsarts9885
Ай бұрын
Have you needed to use the primer for any projects yet?
@PrintBestie
Ай бұрын
Yes I just used it on a shot glass yesterday. I heard that it's mostly for slippery or sleek surfaces
@briannajazmin7144
Ай бұрын
Subbed! I can’t wait to see more 😊 I’ve been searching & searching for a video like this & thankfully you popped up in my recommended
@PrintBestie
Ай бұрын
Glad you made it here!
@SeikoUniMods
Ай бұрын
Wow 😮
@snakebite210
Ай бұрын
You making me want one🎉🎉🎉
@PrintBestie
Ай бұрын
They’re so awesome 🙌🙌🙌
@briannajazmin7144
Ай бұрын
I’d love a video on maintenance!
@PrintBestie
Ай бұрын
@@briannajazmin7144 Absolutely!
@kamildabkowski6271
Ай бұрын
hi im thinking about getting one but cos im not really good with computers im not sure if its for me ?? is there any book for dummies or something similar for people thats really dont have a clue how to operate one but really want to get into printing please?
@PrintBestie
Ай бұрын
Hello, there's two parts two it - learning the machine but also learning a design software like Illustrator or something similar. There are a lot of video resources where you can learn. Are you looking to learn the specific printer or digital printing in general?
@kamildabkowski6271
Ай бұрын
@@PrintBestie I’m actually buying BD-8 tomorrow,no idea how to use it but I’m really determined to learn,yes I’ve seen your little clip on KZitem but I probably need some more step by step how to actually print some on it
@PrintBestie
Ай бұрын
@@kamildabkowski6271 Gotcha! I will work on making some more in depth videos :)
@kamildabkowski6271
Ай бұрын
@@PrintBestie thank you I would really appreciate it
@k-12clothing23
Ай бұрын
Looks great and seems like it’s well made but because of the size, it doesn’t seem like it’s made for production. Maybe a tiny Etsy shop at best. Am I right?
@PrintBestie
Ай бұрын
I wouldn't consider it high production - but maybe so if you're printing on a lot of small objects
Пікірлер