Would like to see a discussion on how to maximize reliability.
@GamerPastHisPrime
2 ай бұрын
Hey, do you remember what that colour is called? Sadly I wrote off my 94 Z28 a few weeks back.... looking at a new one, which is black, but it might need painted. My other car is black, so I may look at something different. I'm thinking either the stock quasar blue they came in at the time, or something like this.
@johnny.3693
2 ай бұрын
Nice job. Why only 380 H.P. ? I would have thought more around 430 or so
@SamuelLopez-qy6nc
3 ай бұрын
Great job explaining!
@SamuelLopez-qy6nc
3 ай бұрын
Plug it in!!! Lol
@sushinktattoo1366
3 ай бұрын
Nice. I run 12.3 with stock heads in cold weather. Hot weather is 12.5 @413whp. Anyone heard of car falling out of torque converter lock wot in 3rd toward red line? Is that possible?
@asbelfernandez3598
3 ай бұрын
If nobody has said it yet the reason your windshield is fogging is because you're running the car where is the back door open to outside air put it on recirculate to keep this from happening that way the outside pressure one build up at the cowl area of the windshield and force the humid air into the car
@stuartwall8212
5 ай бұрын
Those are nice ETs and mph. For a street driven car, in my opinion, to increase track performance you will decrease street manners/fun. You are/were at a good point to leave it alone?
@ybconnection
5 ай бұрын
No wonder the rear end and trans is going out.wow
@thotblocker9000
5 ай бұрын
this was fckin awesome bro 💫👌🏾
@driftliftdraglifestyle1270
5 ай бұрын
Man i hope u still get these comments and can remember what valve springs you have in this car, because i just bought it but the gentlemen cant find the details on it. Seen all your videos but no mention of what springs. Asking because i plan on a more aggressive camshaft.
@alonzahanks1182
6 ай бұрын
A Bracket racer Pulling best times said 10 inch wide tires was ultimate size
@zbj4240
6 ай бұрын
If I can ask, would getting a bigger torque converter make a big cam more suited for a daily driver? I ask because the chop of a BTR Stage 3 paired with an LS1, is just such a heavenly sound.
@Lonniee_builds
8 ай бұрын
What about ls swap I’m doing one for my 02 firebird with the 3800 and I want to put an ls in it
@erniehardeman7228
8 ай бұрын
Just a question why didn't you do the bottom end while you was actually rebuilding your engine.The only other thing was the freeze plugs.I would hate to be pulling the engine back out over a dollar freeze plug bro.
@GamerPastHisPrime
8 ай бұрын
Normally I much prefer these with the SS hood, but… I don’t know if it’s the colour or what… but this is probably the NICEST late model 4th gen Z28 I’ve ever seen. The colour is just amazing. I wouldn’t change a thing about it aesthetically. I know this is an older video, but I hope you still have this. I have an 85 IROCZ Z28, a 94 Z28, and a 2010 SS.
@tampabaybuilds6825
8 ай бұрын
Thank you! Unfortunately I don't have it anymore but I think about this car way more than I thought I would. I put so much time, effort and thought into everything I did to it. Comments like this make me smile still :)
@GamerPastHisPrime
8 ай бұрын
@@tampabaybuilds6825 hope you get one again. 95 Z28 was my first car, I loved it, and it unfortunately caught fire (wanted to be a Firebird I guess). Luckily I only had a few very minor burns, and melted hair on the right side of my head (a quick haircut and all was good), lol. That was in 2006, and I dreamt and dreamt about that car all the time because I missed it so much. Finally grabbed the 94 Z28 last summer. It’s not the exact same, but it’s pretty close (basically just doesn’t have leather, which I could easily change). Maybe one day that will happen for you too!
@RyanThompson-tk1wp
9 ай бұрын
i did forged pistons and rods, rocker arms, valve springs, pushrods, lifters, stage 2 pro ls cam, fi-tech intake, stock heads stock crankshaft Aces fuel injection jackpot plug in play kit. pushin about 750hp naturally aspirated. go big or go home😅
@brad904
9 ай бұрын
What's the company name that built the transmission and how's it held up so far
@tampabaybuilds6825
9 ай бұрын
cahallperformancetrans.com/4l60e%2C-65e%2C-70e Don't have the car anymore but it seemed really strong.
@tonyharris46
9 ай бұрын
you paid 1750 for your trans...nice!! can send me the info,im in Florida also (central fl
@tampabaybuilds6825
9 ай бұрын
Call my guy Tom Simpson at Simpson Performance in Clearwater and he'll tell you who the guy was that built my transmission. I don't remember the name but it was something like "callahan". Tell Tom that Nick Hodges sent you
@tampabaybuilds6825
9 ай бұрын
cahallperformancetrans.com/4l60e%2C-65e%2C-70e
@johnthomas7890
10 ай бұрын
You need a higher stall converter.
@dennisrobinson8008
10 ай бұрын
Is anyone making 500rwhp on a 5.7 ls1?
@ABs70nova
11 ай бұрын
Mph doesn't win races. Et does.
@ericsmithers2952
11 ай бұрын
Remove the heads to change lifters. Did I hear you correct?
@austin_94gt18
Жыл бұрын
Rare to hear of a built 4L60E in a strip built car. I thought the world had moved on to the 4L80E all the way lol.
@MartinAguilar213
Жыл бұрын
Hey hey!! Sweet ride!! That's cool Jeremy tuned my cammed 2010 single cab. Cool video man👍🏼
@Emmanuel_586
Жыл бұрын
YES YES YES DO IT AGAIN DO IT AGAIN!!!!!!
@GapSauceYoutube
Жыл бұрын
Nice honest video mate. Sub'd
@vazfx16
Жыл бұрын
Great video thanks
@armyroh4183
Жыл бұрын
Great info.. I wish you had some links in the description to some of the best prices for these parts, that would be really helpful. I have an 04 GTO and have been reading up on mods and watching all kinds of videos to get some ideas. I already put on a K&N intake, and next I want to put on a new exhaust. Thinking about the loudmouth exhaust or magnaflow exhaust. Then I'd probably like to do a coilover kit, then headers and a camshaft. I'm also looking for some people around the Cincinnati area that work on LS1s if anyone has any info I'd appreciate it.. I'd like to find someone to help me do the mods so I can learn. I'm just using the car as a daily driver, not really looking to put it on the track
@PhoenixFoxxo
Жыл бұрын
honestly unsure if you meant full bolt on? also have one of these, they're fun lol! I'm just wondering why you went with a blower cam from the LSA instead of a cam designed for n/a use? unless boost is planned? 👀
@reeladventurez206
Жыл бұрын
Thanks for doing this, nice to get a consumer daily driver perspective, great details!
@Jaysunn00
Жыл бұрын
I see the stock 4l60 didn’t last long
@tampabaybuilds6825
Жыл бұрын
Nope! That and the rear end went very shortly after. Had them both rebuilt
@codybrehmeyer4311
Жыл бұрын
What length pushrods did you end up using I have the exact setup you did 5.3 ls with 243 heads with new valves and spring upgraded ones, and same cam setup just curious what pushrods you ended up going with, thanks
@tampabaybuilds6825
Жыл бұрын
Hmm, sorry I don't remember what size rods I used. There are some calculations you can do to determine the size, I also gave my mechanic a pushrod length measurer
@danieldormann4177
Жыл бұрын
Maybe someone has already pointed it out,but you have forgotten the SLP Lit. On summit it is about 400 bucks. Great video,lots of useful informations.
@Jason-ru9nz
Жыл бұрын
I love the car dude! But you should add a smooth bellow to make more rpm but your choice and it will add a bit more horsepower
@markwoten6679
Жыл бұрын
Nice Bronco!!! I’m starting my frame up restore on my 79 F150 Styleside C4 2 bbl truck
@sandylegoscali4nia667
2 жыл бұрын
This could’ve been summarized in 5 mins
@dannyhocutt8490
2 жыл бұрын
You are right
@highoctanegames
2 жыл бұрын
Wow this is perfect, I just bought an LS1 Camaro recently and i need this
@MegaBALLINOUT
2 жыл бұрын
Great video for new F-body owners like myself, very understandable.
@JoeVinson
2 жыл бұрын
If you aren't running a turbo or supermarket you may want to change your pistons for more compression.
@bobbyjonson2944
2 жыл бұрын
Thanks man that was a great help 👍
@tunerdadtunerdad7927
2 жыл бұрын
Nice car...Don't listen to all the derps here hating on it. They are slow anyways.
@ethanol-fb
Жыл бұрын
4th gens are just cheap v8s if you dont care how ugly they are, but the lt1s were better
@jas9256
Жыл бұрын
@@ethanol-fb lts are shtt
@ethanol-fb
Жыл бұрын
@@jas9256 how? lol
@pabbqmgv
2 жыл бұрын
I see you haven’t done a video in a long time. Hope all is well.
@pabbqmgv
2 жыл бұрын
I think I’ve already told you before, but this was and is a great video man. Really helping me.
@JFWGarage
2 жыл бұрын
10 time watching now 😂👌🏼🇦🇺
@patcoder7308
2 жыл бұрын
Get flaps
@shaun9156
2 жыл бұрын
1/4 mile time?
@joebuddensbeard6615
2 жыл бұрын
Do these fuck you're Trans up faster?
@terrycarver1255
2 жыл бұрын
Easy way to explain is get as much air in as fast as you can and get exhaust out even faster. 👍
Пікірлер