This explained nothing about mounting it to a molle rack
@christophervela5447
2 ай бұрын
I just watched a video of the locks rusting out
@larrycole1991
2 ай бұрын
Thank you, I needed this explanation! For 3 months I never locked mine, then one full gas can got stolen. I ordered the locking version and couldn't figure out why both knobs spin. Now I know. Thank you!
@MRHEAT20
4 ай бұрын
Can the fuel cans be mounted laying flat - I want to mount on my pickups hard cover ?
@koalafan1576
5 ай бұрын
I “love” how you keep saying machine. 😂🤣
@barrywilcox4401
5 ай бұрын
How many inches between the clamps?
@charlesscotch4199
5 ай бұрын
Hopefully your tanks don’t swell like mine did. Suuuuper hard to get the things on the mounts and secured when they do.
@elizabethetienne1595
11 ай бұрын
You neglected to show us the backside of the gas can with the mounting plate attached. My mounting plate does not attach to the mount. The screws are not the correct size. The holes are far too small for these size screws and the carriage bolts are even larger and I’m unsure what I’m supposed to do with those.
@elizabethetienne1595
11 ай бұрын
I have no clue how to attach the mounting plate to the mount itself. The screws are too big for the holes.
@elizabethetienne1595
11 ай бұрын
Very vague video. You did not show us how you got the bracket into the gas can. Sounds silly but I’m confused. I have all these screws, nuts and bolts and no instructions whatsoever beyond a ounce of paper that shows up step 1. What about step 2 and 3 and so on…). I’m somewhat mechanical but lost on this one. I guess I’ll hevt ti search for other videos from civilians who have done it themselves.
@THENEWWRANGLER
Жыл бұрын
what size bolts and nuts to mount the backing plate?
@wearefreesd3305
Жыл бұрын
Fits my 2023 rzr I got the 2” mounts.
@Dunning-Kruger-effect
Жыл бұрын
People are mounting these on roofs.That is really unsafe. Donyou revommend this?
@j.christopherchang1668
Жыл бұрын
do you know if this would snap on to Jeep JL roll bar ? Or does this product only work on circular roll bars....
@claytonpulley4947
Жыл бұрын
how do you mount it!!!!!!!!
@Coyotes_Locos
Жыл бұрын
is this this being made and sold?
@ROADWARRIOR21
Жыл бұрын
25 people that I know that got these Rotopax junk gas plastic crap, they all LEAK, and they expand now you can't stack 2 together no longer save your money they are JUNK!!!!
@resolutejku
Жыл бұрын
Yeah the nozzle on the gas rotopax was garbage it leaked fuel every time and never worked. I replaced it and now it's not a complete pain to use.
@mikecrivello4908
Жыл бұрын
Can I attach/mount a Rotopax gas can to my Frontrunner ladder? The ladder is not bolted to the 4Runner, so I’m not sure about the weight of the container + gas bouncing on the rear hatch while off road. Thanks 👍🏻
@jeannevaught1842
Жыл бұрын
Do you make this anymore ,Tube one?
@msalimunion3597
2 жыл бұрын
I want plastic tank for diesel
@bashingbagpipesstudios6503
2 жыл бұрын
What about how to mount to different racks and different vehicles? Or are just on our own figuring that out?
@Interpolation1911
Жыл бұрын
They don’t even response. Will look for a different brand.
@NorthwestAdventurerNWA
Жыл бұрын
@@Interpolation1911💯
@mediathreat
2 жыл бұрын
haha we never gonna get dimensions on this thing
@whitetjw27
2 жыл бұрын
Can this same system be used for a spare tire mounted on the underside of the vehicle?
@christopherburbidge972
2 жыл бұрын
This was and is the worst explainatory video for a product that I’ve ever seen! Wake up fellas!
@Nomad-jp3mq
2 жыл бұрын
Can you please post a full bill of materials for this install. I already have RotopaX RX-3EXT Extension Pack - 3 Gallon Capacity, and RotopaX RX-TM Spare Tire Carriers , One Size, Black and I have RotopaX RX-3G Gasoline Pack - 3 Gallon Capacity on order for an April delivery. An expanded view of how it goes together would be an awesome aid to promote what appears to be a very good product, even if the price seems a bit steep.
@JustinShinoda
2 жыл бұрын
i’ve been trying to mount this for quite some time and it isn’t making any sense to me
@rti512
2 жыл бұрын
Hello l cannot find nowhere the dimensions Sam help??
@RCGJR_
2 жыл бұрын
Do they come with an extra back plating or is that sold separately?
@Pnwxplorations79
2 жыл бұрын
The locks seize up over time resulting in a non working lock and then you have to dismount your rotopax by taking out the mount bolts from behind. Be sure to watch all videos of how many people have their locks seized before buying
@GroovyGeek
3 жыл бұрын
My advice is to avoid purchasing this if at all possible. If you must purchase save yourself a lot of grief with two simple adjustments. The door WILL sag when you remove the 4 bolts. Prevent this by shimming it while everything bis still bolted. The tolerances of the unit are not well thought out. The groove for the L brackets is too long on the left side and allows placing the L brackets so they obstruct the mounting holes. Most importantly, the tolerances near the plastic covers are insufficient and can obstruct the motion of the door no matter how much care you exercise before tightening the mounting bolts. Can be fixed by shaving off a bit of the plastic but this issue could have been prevent by pulling in the end of the bracket 1/16 inch. YT does does not allow image upload in the comments or I would have provided an image to illustrate. Minor oversights add to a good deal of frustration and extra work. Finally, the plastic hinge covers are not interchangeable, pay attention when you remove them. My suggestion is not to remove them at all since they provide a useful alignment guide for the placement of the support brackets.
@micsierra806
3 жыл бұрын
I have to say, your installation instructions are the single WORST instructions to ship with a product. I encourage you to look at what Leitner Designs ships with their products then look at the instructions you send with your locking pax mount. You are better than this. If I didn't already toss the boxes these were shipped in you would have a couple of hundred dollars worth of RMAs. Unacceptable.
@trevorschroeder6745
3 жыл бұрын
Lock don’t work with extension and all mounts r just a bolt so makes no sense just take bolt off back and steal the whole thing need to re invent this Product
@BikerGirlTraveler
3 жыл бұрын
Where are the instructions? You only showcased the function of your mounts, but did not give instructions about mounting.
@brianczarny3272
3 жыл бұрын
I just tried to install mine. The issue I'm having is that the bottom bolts when removed the back plate falls down inside the tailgate. When I try to put the bolts in they are just not catching that bottom back plate inside the tailgate. Any idea why that back plate is falling down?
@rotopax2078
3 жыл бұрын
If you would like send us an email at [email protected] we would be happy to assist you with this question.
@michaelm.3641
3 жыл бұрын
I dont understand why none of your mount product details explain what fits the various different sized tanks. Makes it very hard with no details/info.
@zjohnsoncg
3 жыл бұрын
Just received my deluxe mount... missing lock washers. You'd think for the ridiculous price of these things you'd get all the hardware needed.
@danlux4954
3 жыл бұрын
Any bigger units? 1.5 gal won’t fill my machine.
@andym9427
3 жыл бұрын
Is it possible to add two 2 gallon tanks together and lock those up?
@jmueller87
3 жыл бұрын
I don’t think the lock works with the extension, but I could be wrong.
@dhandy261
3 жыл бұрын
@@jmueller87 Yes they state that extensions defeat the locks purpose. But the lock defeats itself as mine were stolen because you can force twist the lock to remove the gas can.
@Dhurt213
8 ай бұрын
@@dhandy261I hate thieves
@UNKPCRIDE
3 жыл бұрын
instead of making one bracket that works, they make a shitty one that wobbles, a good one, and a better one that locks. Great marketing. 3 different costs.
@jeromeburrasca6710
3 жыл бұрын
Do you sell a locking gas cap for the four gallon Rotopax???
@austinmarr680
3 жыл бұрын
Just picked up a set of Fuel and Water containers for my RZR. What are the rubber rolls for that come with the mounts????? Do those go on the inside of the clamp --> Rollpax or do they get placed on the mounting bracket --> roll bar??? Thanks!
@tocaboca4life663
6 ай бұрын
Just bought one of these myself and was looking for answers to your exact question lol. Did you end up finding out where the rubber strips are supposed to be placed?
@austinmarr2582
6 ай бұрын
No never found my answer. Ended up putting them on the inside of clamps that grip the containers
@devildog6899
3 жыл бұрын
will this work with a smittybuilt heavy duty hinge tire carrier.
@mtnride4930
3 жыл бұрын
could this mount be used on a ladder? I have a revel sprinter with a ladder on the back
@MiriaCambie
3 жыл бұрын
Your didn't take the screws and washer out of the bag and actually show how to mount them to the frame. All you did is show how to finish mounting. This video really sucks!
@rotopaxsupport543
3 жыл бұрын
Hello! Sorry for any confusion feel free to email us at [email protected] for any questions you have.
@duoglide69
3 жыл бұрын
What make people think a plastic container is worth $100 dollars?
@HondaFit4Adventure
3 жыл бұрын
Durability, plenty of mounting options, food grade plastic, UV resistant, Fairly small business etc.
@duoglide69
3 жыл бұрын
A load of B.S.. my buddy and I tightened it up tight. We both could grab the wing with a lock and undo off the plastic nubs. If someone had a crescent wrench, your hundred dollar rotopax would effortlessly be gone in second !!!
@HondaFit4Adventure
3 жыл бұрын
Anything can be gone in a second if you come prepared. Have you experienced the lock failing yet? Like the key wont even open it. It seems to be a common problem.
@williamdrapal83
3 жыл бұрын
I liked your install but there wasn't a section on how to install the locks on metal steel panel. I have a red and white containers to install 3 gal' red and a 2 gal white. this needs two locks and different install from the 4 gal you did. can you explain how to install the different systems instead of the most popular for the long haulers. us old people need a little more explaining. thanks
@HondaFit4Adventure
3 жыл бұрын
Don't buy the locks...
@ertonyrn
4 жыл бұрын
How do i mount rotopax to a teraflex bracket? I dont want the hi-lift just the rotopax. I only see people attaching rotopax to the hi-lift bracket
@teffersonhenrique
4 жыл бұрын
I got this one, and the problem I noticed is that it wiggles a lot.
Пікірлер