Unfortunately this method is not reliable... It worked for me for a few years and 4k kilometers but I got the dreadful 504 error just a while ago 😞 got gen 4 cx from 2021
@macca11sm
Ай бұрын
Belting. Cheers
@mohcingara
6 ай бұрын
In your experience, does it affect the battery or the motor?
@BartekJuszczak
5 ай бұрын
Going faster uses more battery on average of course but I hadn't noticed any damage and I have the same bike still use regularly (8 years now)
@ifarewelli
8 күн бұрын
So torque stays the same on the bike, which is what destroys the components. So nothing to worry
@Pierre-monti
9 ай бұрын
Hi, i’ve done it but have an error on the display. Spd snsr check magnet. Can not fix it. I have read on the net that i should drive 90’ and it will be fixed, is that true? How? Power off ? Thx
@wholenebaleba
11 ай бұрын
Rides and handles well could use better suspension but overall a nice well built bike battery seems to last along time
@jamiemercer-gk6gz
Жыл бұрын
So good just did this on my cube botch
@supersai4198
Жыл бұрын
Talk too much shit get to the point
@gilesk
Жыл бұрын
Do not do this on the Yamaha PW-ST, it will break the motor!
@cleggydadon
Жыл бұрын
this fucked my bike up cant get the red and white flashing light off now after putting it back.
@matt-cj8do
Ай бұрын
Did you fix this
@ATARI-DAVE-73
Жыл бұрын
Why not just remove the magnet from the wheel. That's all you need to do 🇦🇺🐨👍🏼
@MrOrchin33
Жыл бұрын
After awhile it cuts out and you have to reset the controls again. I'm not sure if this is because it over heats the motor.🤔
@michaelhart5070
Жыл бұрын
Where is the step-by-step dismantling and installation video?
@darrenthompson5954
Жыл бұрын
So I tried this and it works a little then cuts out am I doing something wrong
@zhonggonghao7440
Жыл бұрын
I have a 'Giant GrandTour E+ 1 2018' with a Yamaha motor (60 Nm, 250 W). I tried this method. After putting the magnet on the pedal I got two outcomes, 1) the motor works only a little bit, basically it is not working. 2) After changing the position of the magnet several times at last the motor works as before the delimiting, namely the Ebike moves maximal 25 Kmh. In both case the speed display display from 4 to 99 kmh. Anyone has any advice? Thanks in advance! My guss is: there is a maximal working limit for this Yamaha motor and the motor working limit cannot be surpassed even we change the position of the magnet
@TravelCarsPasicevoPhotography
Жыл бұрын
Do someone have problem when all put back in original state? When I put it back on yamaha pw st, display is blinking (range, odo etc) and speed sensor doesnt pick up spee (0 km /h) motor is workimg, I ve tested through diagnostics , and in diagnostic program is showing no of turnings of the wheel Bike is haibike alltrail 6
@ivanso1978
Жыл бұрын
Anyone tried this on a bosch motor? Does the firmware block these kinds of hacks?
@lakmessi3934
Жыл бұрын
I do it with Bosch motor cx performance and its Work perfectly
@dlpcaddy
2 жыл бұрын
Any tips for a rattan pathfinder 750w gd06 display
@corzmtb6464
2 жыл бұрын
Geiler scheiss haha, Raymon Fullray 5.0 Yamaha PW ST funktioniert super
@ifarewelli
8 күн бұрын
Immer noch? Wie schnell biste damit?
@corzmtb6464
8 күн бұрын
@@ifarewelli Sollte man nicht dauerhaft verwenden weil der Motor dadurch schneller kaputt geht. Im Durchschnitt fährt man so 40kmh
@nixonsmateruby1
2 жыл бұрын
Love it. Just bought one and it's a pain waiting for it to decide.
@There-Is-No-Virus
2 жыл бұрын
This works! 2021 - Cube 21 Touring Hybrid ONE 500. First time I tried it, the sensors must have not been aligned / too far apart. I repositioned the sensor a bit and it works. Bike feels 1000 times better. Speeds are roughly twice as fast now and the training wheels are off. I didn't need to take off the back wheel and I just used the tape we had, which was cotton tape from memory. One you can tear. Many thanks.
@tribune2250
2 жыл бұрын
Perso la voix de la personne qu'on entend dans la vidéo et très intrigante il a une voix qui passerait totalement
@danielwellard5618
3 жыл бұрын
Can't you just remove the magnet completely?
@BartekJuszczak
3 жыл бұрын
That's how I started trying to crack this, unfortunately if you just remove the magnet then the motor cuts out after 2 seconds because "the wheels aren't moving" and it doesn't wanna burn out the motor. And you have to turn off the bike and start it again to get it to move for 2 seconds again and it shuts off again. So what followed was me sitting on the couch for an hour staring at the bike with Leonardo da Vinci type drawings flashing in my mind, how can I get the sensor to still read - what is still moving on the bike when the bike is moving - but slower than the wheel.. can i attach the magnet to the wheel in some flappy way so it only passes next to the sensor every 2 turns? The custom boxes electric can generate their own signals.. can i do that with just a battery and pulse it somehow? Then I came up with the simple answer - just measure the pedal speed as the wheel speed, it is always slower than the wheel and if it isn't then the speed is way below the 25kmh limit.
@geu6270
3 жыл бұрын
Been using for months now on a Yama only not Bosch with their overreach (they own your bike). I get error code occasionally but the sensor is still getting some reads so the assist level switch still works. You just have to feel what level you are in. Worth it to me. Bosch new firmware sucks and will shut down your engine. I use a Volspeed in the Bosch. Easy to install without dropping the motor. Would have to drop the motor in a Yama.
@Ubaid163
2 ай бұрын
No one able to solve my problem. Brother I have an e bike named as Raymon hardray 4.0. It has a yamaha mid drive motor and a yamaha display. I tried to increase the speed of the bike by putting magnet to pedals and removing sensor from its original place.. it worked perfectly but suddenly it stopped working completely. It gives very little peddle assist. Before I could go max 16miles but now the motor doesn’t support 5 miles. The change in the display that appears after this problem is that the range shown on the display is blinking. It never blinked before. Please help me. I haven’t found any video to solve this problem. No one in my area is able to identify the problem
@marcusdance5068
3 жыл бұрын
Done this on a Giant quick e 2019 6 months ago been great till now , now it's got a mind of it's own! Screen functions not doing what it should rear wheel spins on it's own but not all the time. Putting magnet back to what is was and taking to Giant to see what can be done if they sort it out will fit a Speedbox 2 .
@tom8181
3 жыл бұрын
update please how is the bike now? how fast?
@franticfrancis9710
3 жыл бұрын
Only problem I find is in an easy gear you go slower than 16mph
@louissrensen8327
3 жыл бұрын
Works great on my 2018 sduro trekking 4.0, i bought a magnet and put it inside the end of the pedal axle. I can get it up to 55km/h. 👏😎
@ifarewelli
8 күн бұрын
Still working?
@cansee0
3 жыл бұрын
Bought badass box last night , now I find this 🤬🤬
@danimayb
3 жыл бұрын
I bought a speed box 2 and don't regret it! I knew about this hack but not a fan. The chip hides away in my motor cover, Can be turned on and off by the light button on the Yamaha display, There's no trickery like doubling your speed limit as it's lifted completely, And all stats on the display stay correct. Money well spent imo! Only gotta pay it the once, And the bike cost me 2 grand anyway lol
@sirmeme-alot831
3 жыл бұрын
Would this work for rear hub motors? In order to bypass the 25kmh limit. Could the same hack work for a different motor style? More specifically would this work in the HyuHome/ Taoci electric bike found in amazon? It has I think a 36Volt and a 360 watt rear hub motor
@joaomiguelgoncalves3045
3 жыл бұрын
Great. It works.
@yoonbn
3 жыл бұрын
This clever way works for Creo SL Comp as the magnetic line is long enough to align on the end of a crank arm. Many thanks.
@natangadomski1165
3 жыл бұрын
Anyone knows if I can do the same with decathlon’s Rockrider?
@jerryx2000
3 жыл бұрын
why not?
@MrOrchin33
Жыл бұрын
Yes it does work find. But it cuts out after awhile so need to reset it.
@valentinxulescu
4 жыл бұрын
Works perfectly on 2020 Yamaha PW-ST model :D I've used a diffrent magned on the pedal since the space is tighter.
@paulleeFLOW
4 жыл бұрын
great info thanks for sharing
@00fastvic
4 жыл бұрын
just bought a haibike sduro hard 4 done this before and i cant use the mode to go up and down i was standing there before and it was on the mode 3 can anyone help
@johnnydoe1984
4 жыл бұрын
As Dave Post has said Tour de France 30mph all day long . When I do it. 10 minutes on my normal Diverge (huff puff break) It's 30min on my ebike (still huff puff) but I'm 5 more miles up the road for the same effort and not so knackered.
@johnnydoe1984
4 жыл бұрын
I have aGiant E+1 road bike that I've "tuned" . Did 62mph downhill and will regularly attain 30+ . These speeds (downhill crazy speed) was done with not a soul around 6am on a Sunday ..The 30+ , you've just got be sensible. Traffic / shared cycle paths /seafront cycle lanes or town riding I never do it. Plod has never shown an interest and I'm now about to get delivery of a nice Cube Acid MTB and will do exactly the same . 15mph is ABSURD ! I am not a pro ..far from it but can attain 22/25mph quite easily on my specialzed diverge RDB . As they say " the law is an ass !" Plus most people , granny and grandad included wouldn't want to pedal like a madman on amphetamine . I'm neither but if I wish to pedal hard I don't want a limit thats quit frankly daft at 15mph and I don't want big brother ordering me to have one ! The more they force the more we push back.
@zhonggonghao7440
Жыл бұрын
Hi, bro, I did this on my Giant GrandTour E+1 2018 with a Yamaha motor, the speed didn't change at all. Could you explain a little where exactly you put the original magnet? Or you bought another magnet?
@ANTxMC
4 жыл бұрын
Did this to my Giant Explore E+4 and the difference is slightly noticeable. A commute to work that normally takes 30 minutes took 22. Did drain the battery slightly quicker tho.
@rustypooh812
4 жыл бұрын
SO GOOD! Just tweaked 2x Giant Fathom E+ 29 2020's in about 5 mins each, and it has literally liberated the beast!! Now it rides like it was meant to ride. Also, just saved me $400AUD on dongles for 2 bikes. Mucho Gracias!
@matt-cj8do
Ай бұрын
How are the bikes now
@rustypooh812
Ай бұрын
@@matt-cj8do still going strong
@antonybro7400
4 жыл бұрын
Mumble Mumble.
@SkyScannerBtown
4 жыл бұрын
Thanks a million works a treat
@jjcompvideosj-j_comp4604
4 жыл бұрын
"It's not really going to make the motor use any more POWER so you won't damage it"... Then goes on to say... "its pulling more POWER because you're going faster". I'm sure that you're aware that if you do this trick, it voids your warranty. Your cycle computer can be read and data could be used to void warranty. Just a heads up... E bikes are not cheap so that good old warranty is going to be worth keeping.
@errornogo
4 жыл бұрын
boring
@agassi071
4 жыл бұрын
I can confirm after around 160miles yamaha PW-X fitted to a haibike 2019 model no faults, no errors, no problems. I love it 💞
@bgbrunocom
Күн бұрын
Q) but values are wrong yes ?
@mrlegendarybenzy108
5 жыл бұрын
Super thanx 👍
@Peakabike
5 жыл бұрын
A belated thanks for that tip, works fine on a Bosch Purion !
@SuperiorNo1
3 жыл бұрын
I switched the position of the sensor and put a magnet on the Crank 25mph 😁😈
@Roman00000001
5 жыл бұрын
эх бля лучше б ты по-русски говорил...)))
@SwoopScoopie
5 жыл бұрын
You can delimit the bike on the screen
@C0ntr3y
5 жыл бұрын
How?
@SwoopScoopie
5 жыл бұрын
@@C0ntr3y you go to settinngs and enter the special code
@C0ntr3y
5 жыл бұрын
@@SwoopScoopie there ain't no setting on this bike
@SwoopScoopie
5 жыл бұрын
@@C0ntr3y i know i forgot to say its on the e bike screen i use
@paroleofficer2616
5 жыл бұрын
STOP MUMBLING SPEAK ENGLISH OR GET OFF YOU TUBE
@seancurley3009
5 жыл бұрын
Have done this since I seen this video. It’s like a rocker but seeing the range estimated on display has drop to 15k from full charge. Nervous to check it out as bike is heavy as hell. Anyone come across this?
@Lantis3d
4 жыл бұрын
same here on Trek Powerfly 5, kinda sucks, 22km max distance on Tour mode
@skulljer9419
5 жыл бұрын
Nice-take your $5k bike and start moving shit around using duct tape to hold it on? And forget about your display. Mph,distance,etc-way off
Пікірлер