That's an eBay link that has the hardware with it. But you can use the part number from that to just get the gasket.
@davegates9759
2 ай бұрын
Thank you very much!!
@davegates9759
Ай бұрын
Just wanted to ask, how did you get the seal to seat properly on the edges? I've gotten one of these and the fitment is terrible! It doesn't seat correctly and I've tried everything including extra RTV, and it still leaks!@VWAudidoneright
@VWAudidoneright
Ай бұрын
@@davegates9759 I used silicone spray and pressed it in by hand. It was not easy. I would suggest putting the seal in the freezer and putting the valve cover out in the sun for a bit. That should contract the seal and expand the cover.
@VWAudidoneright
4 ай бұрын
It works great everyone.
@thomaskrenn3808
4 ай бұрын
great information 👍👍👍
@VWAudidoneright
4 ай бұрын
Glad you think so!
@naruto0604
4 ай бұрын
Did it work i have a v10 too and id love to know the outcome
@VWAudidoneright
4 ай бұрын
It woks.
@edwardovillegas2267
5 ай бұрын
Thanks for sharing. Any chance of sharing your oil leak repairs?
@VWAudidoneright
5 ай бұрын
Check out my video about the valve cover gasket repair.
@DeeCutler
5 ай бұрын
Hey there. Where did you find your stepper motor for the v10 TDI. I need to do the same thing.
@VWAudidoneright
5 ай бұрын
@@DeeCutler I got it from eBay.
@DeeCutler
5 ай бұрын
Tku. Are you open to connecting. I have a 2004 and would love to get your open on some of my issues
@VWAudidoneright
5 ай бұрын
@@DeeCutler sure.
@edwardovillegas2267
5 ай бұрын
Any chance of a follow-up video on the outcome of the fix?.. Appreciate your time in a sharing.
@KaloyanDobrev
6 ай бұрын
What would be the steps to diagnose whether it is a stepper motor, intead of just throwings parts at it?
@KaloyanDobrev
6 ай бұрын
Great video.what happened with the other modifications?
@VWAudidoneright
Жыл бұрын
It was my injection pump.
@adelinstefanut
Жыл бұрын
What was the problem
@dieterholle5666
Жыл бұрын
Thank you for the video. Have possibly the same issue, to diagnose pulled the fuse for the stepper control unit, then get no more clunking and binding. Can you confirm that the stepper motor replacement solved the issue for you? Is the stepper motor perhaps serviceable?
@VWAudidoneright
Жыл бұрын
@dieterholle5666 unfortunately it did not. I tried pulling the fuse for the diff locker but it made no difference. Once the weather warms up a bit I'm gonna get to the bottom of it. It's starting to get really annoying driving through traffic.
@WelliDS
Жыл бұрын
This video is good, thank you for taking your time to share with us Tregers. The loud music is the only bad thing on this video.
@NeoCXid
Жыл бұрын
Pls also Show how to Change the g85 Steering Angle Sensor
@VWAudidoneright
Жыл бұрын
The g85 sensor is part of the slip ring. If you replace the slip ring you will replace the g85.
@NeoCXid
Жыл бұрын
@@VWAudidoneright thank you for the answer but vcds says the Steering angle sensor works the electric Module shaped Like a U is damaged
@artakzatikyan284
Жыл бұрын
I'm going to be an expert in Touaregs in a year following your channel. I can work in my own TDI in 2024
@VWAudidoneright
Жыл бұрын
The g85 sensor is part of the slip ring. So if you follow this video and change the slip ring the G85 would also be replaced.
@artakzatikyan284
Жыл бұрын
@VAG Done Right you replied to me
@mariotorregrosa8390
2 жыл бұрын
Same problem here. but mine is even worse. I don't know what happen there :(
@lowmonte1978
3 жыл бұрын
hey did the shim work for you ?
@VWAudidoneright
3 жыл бұрын
Yes
@lowmonte1978
3 жыл бұрын
@@VWAudidoneright sweet! yeah I just recently upgraded my cLutch and flywheel. and am having issues with it disengaging, pedal has tension and bounces back but is not fully disengaging the clutch. Just bought a set hoping this fixes my issue.
@VWAudidoneright
Жыл бұрын
@@lowmonte1978 did this kit fix your clutch issue?
@jonasjo202
4 жыл бұрын
thanks
@andreb5393
6 жыл бұрын
hi I was curious to know what thickness nls kit has in mm? Thanks
@VWAudidoneright
4 жыл бұрын
Sorry I never measured it.
@andreb5393
6 жыл бұрын
hi I was curious to know what thickness nls kit has in mm. Thanks
@VWAudidoneright
6 жыл бұрын
I'm sorry but I did not measure it. But from what I can remember from feeling it I'de say about 1.5mm
@andreb5393
6 жыл бұрын
Armenak Abadjian thank you 😉
@jeremywhittler8591
6 жыл бұрын
What is the deal with the single vs dual flywheel as far as reliability?
@VWAudidoneright
6 жыл бұрын
Reliability wise I would say the single mass is probably better since it does not have any moving parts. But driveability wise the dual mass is smoother on engagement.
@jeremywhittler8591
6 жыл бұрын
I thought about cryo-treating my single mass. I have this in a mk3.5 VR 12V. I am trying to hold about 580 in FWD.
@mathewbailey1004
7 жыл бұрын
Hi where did you get the kit from and what is the kit called thanks
@VWAudidoneright
7 жыл бұрын
Mathew Bailey Nothing Leaves Stock
@mathewbailey1004
7 жыл бұрын
Armenak Abadjian hi thanks for your reply but l didn't say I am in the UK do you think I can get it from the vw maine dealer
@VWAudidoneright
7 жыл бұрын
Mathew Bailey no it's an aftermarket product. Only NLS sells that. I'm sure you can have it shipped to the UK.
@mathewbailey1004
7 жыл бұрын
Armenak Abadjian ok thanks for your help
@maveric0738
7 жыл бұрын
Did this resolve the issue?
@VWAudidoneright
7 жыл бұрын
Yes it did. Installed a clutchmasters FX400 with a light weight flywheel. No issues
@blamine5
4 жыл бұрын
Armenak Abadjian i have 6 speed 4x4 gearbox with a lot Play in the main shaft bearing, but there is a clip to remove the bearing plastique cover , it’s not like yours that can be removed by a screw driver, can the play be adjusted by thé same kit or it doesn’t work ?
@andraskovacs7878
Жыл бұрын
@@VWAudidonerightI have a Passat B6 6 gearbox the mainshaft was a lot of play and the cer won t come out 1 and reverse gear and the clutch pedal dragged now this problem is fixed but I have a question the clutch and the flywhell is new but the clutch sometimes is strange does not disengage if I install this shim kit can I fix the problem. Interesting when the hidraulic sistem is air out the clutch work perfect but 10 minutes the clutch works as before. There is no air in system!!
@VWAudidoneright
Жыл бұрын
@@blamine5 I can't tell you honestly. I don't know which exact transmission you have. This kid works on Mark 4 02m transmissions.
@VWAudidoneright
Жыл бұрын
@@andraskovacs7878 this kit only works on the mark 4 02M transmissions. The Passat has a different transmission. If you bleed the system and it goes away for a bit then comes back then I would say you have an issue with the hydraulic system. I would check the Master slave cylinders and also the lines.
Пікірлер