what, no spare tire install? I prefer Bazooka tubes myself....
@vrsaceimg
Күн бұрын
I like living life on the edge. I got AAA
@scorpiondynamics
2 күн бұрын
Fast and furious vibes fosho with the sub bumping 🤌🏼
@CarPassionChannel
9 күн бұрын
Wheels?
@vrsaceimg
4 күн бұрын
Workmeister S1 3p wheels
@Dinkleberggaming
10 күн бұрын
car
@HumberStudent
13 күн бұрын
How bad does it rub or is it flush?
@vrsaceimg
4 күн бұрын
Doesn’t rub bad at all. It does a little bit if you throw it into a corner, but not bad if you run a little extra camber like I do. I think I am at -2° all around
@HumberStudent
13 күн бұрын
Hard ❤
@Colton-nh6nq
16 күн бұрын
Jjij
@lmc333
Ай бұрын
Looking at this, we need a Toyota Sienna GR
@FrankBurgos
Ай бұрын
Looks great
@paulfreakingji
Ай бұрын
I'm thinking of doing spacers but no lowering springs -- worth it?
@vrsaceimg
4 күн бұрын
I think it is worth it. You should do 15mm front and 25mm rear if you don’t plan on lowering it. This set up in the video has some natural camber which makes the fit a little better
@DeVoNmotorsports
Ай бұрын
Sounds like a diesel those 3 cylinder engines are weird they cant be ballanced it has a ballance shaft and it still vibrates, i wonder what solid engine mounts would be like , the vibrations really cause issues when going for more power i think
@jadalaspablo3695
2 ай бұрын
are the oem wheel studs fully inside the spacer or do a couple threads stick out ?
@ArthaxtaDaVince777
3 ай бұрын
SXTH is the best aftermarket parts producer, high quality and priced just right. Unlike the garbage eventuri, $1600 for an intake.
@alykassam9550
3 ай бұрын
Do you have any rub? I have 20mm spacer in the front and 25mm in the rear (removed the stock 10mm) and am debating between the pro and sportlines.
@JCWaldick
2 ай бұрын
I just got the Swift Lowering springs for mine
@dru1581
4 ай бұрын
What wheels are those? 🔥
@vrsaceimg
4 күн бұрын
Rays Getter 18x9.5 +12
@ej86
4 ай бұрын
NV, where you at? Reno?
@kevino5181
4 ай бұрын
hows the ride quality with the lowering springs? I LOVE the way the stock suspension feels, but i want to lower mine.
@JamzVik
4 ай бұрын
Looks damn good! Did you have to roll the fenders at all? Been looking into this combo for mine but still want to enjoy the twisties without having to remove liners or roll the fenders.
@driftsta
5 ай бұрын
Great video! Fitment looks great. However, I'm curious is there a reason you ran 30mm spacers in the rear (taking off factory spacers) but ran 20mm spacers in the front stacking on top of the factory spacer? Couldn't you have just ran 30mm spacer on both the front/rear after taking off factory spacer? Or run 20mm spacers on front/rear by stacking on top of the factory spacer?
@natepickslay
5 ай бұрын
YUP, looks great
@mags3376
5 ай бұрын
Looks 🔥 bro, do you find with this setup that the front and back are perfectly inline with the poke? Or the do the backs still poke a bit more out?
@dredivac8220
5 ай бұрын
Great video! I just bought the Bonoss 15mm and 25mm for my GR! Thanks for showing us these!
@r-sh1n0da82
5 ай бұрын
Are you lowered on the same springs? Any rubbing issues?
@JasonChurch1992
4 ай бұрын
Same here... 15mm abd 25mm for my GRC. They're great!
@05xrunner
2 ай бұрын
@@JasonChurch1992 did everything fit after? No need to alter the length of the stock studs?
@jackbruce9041
5 ай бұрын
Ive got 20mm all around gonna run the 30s in back like you next
@FuzionisticGFX
6 ай бұрын
Have you had any rubbing with this fitment?
@mags3376
6 ай бұрын
Any rubbing?
@TheJOHNJOHNIIII
6 ай бұрын
Size of wheels and tires?
@vrsaceimg
4 күн бұрын
18x9.5 +12 with 255/35/18 tires
@jimsgaragetoys
6 ай бұрын
Good job! I did something very similar but I used 15mm front and 25mm rear spacer setup after seeing some people rub with the Swift springs and the 20mm/30mm spacers.
@dredivac8220
5 ай бұрын
I just bought the 15mm and 25mm for my GR with swift spring for this reason!
@murk4545
3 ай бұрын
I think the 15 looks better but 20 is good as well. Perfect is probably somewhere in between thise
@jimsgaragetoys
3 ай бұрын
@@murk4545 I saw a car with 20mm/30mm and it had a little poke, I'm just not a fan of any poke. 😉
@jersey3686
6 ай бұрын
you park like a dumbass bro ❤
@vrsaceimg
6 ай бұрын
For dramatic effect 🤣
@bobdavis3662
6 ай бұрын
What is the name of the song?
@vrsaceimg
6 ай бұрын
Car camping - goth babe
@ttotsbarc
6 ай бұрын
Awesome fitment!
@Qistyx
7 ай бұрын
Those headlights I’ve seen them on the 4door sedan Corolla does anyone know if they fit the older corollas like the 2021 Corolla ? I’ve been getting mixed reviews some say they fix others say they only fit the le models but I’ve seen the 2022 sedans with them
@vrsaceimg
6 ай бұрын
Not sure on figment but they do look like the same size. I would guess these have a different wiring harness due to the LED running light and turn signal but other than that should bolt up okay.
@andrewstevens7205
7 ай бұрын
I have 20 front and 25 out back on my GRC. These spacers are no joke. Great quality. I’ll never buy any different spacer again.
@vrsaceimg
6 ай бұрын
I’m glad you like them. I completely agree, excellent quality!
@andrewstevens7205
6 ай бұрын
@@vrsaceimg just went with 245s over the 235s with the eibach sportline springs and have done rubbing. I’m shaving the quarters in about ten minutes actually lol it looks way too good to not do it. Threw the oem spacers on back for the time being and it’s nowhere near as good. These back wheels look fat and so cambered. Flush. Man it looks good 😊
@vrsaceimg
6 ай бұрын
@@andrewstevens7205 I just threw on my Rays from the Evo X and they are 18x9.5 +12 with 255/35’s it is aggressive but looks so good with the width of this car!
@COROLLA1-m4d
7 ай бұрын
Sounds good! Would you be able to take a video of either revving or driving? Trying to decide on this. Thanks!
@JoJo-xd8xv
7 ай бұрын
nice poke
@Conn0rKent
7 ай бұрын
Any idea if the stud length is longer than OEM? They seem longer in the video but it's hard to tell. OEM studs are super short and I want to make sure I'm going to get enough thread engagement on aftermarket wheels.
@lannym
7 ай бұрын
I would skip spacers in general if going to aftermarket rims. Just get rims with the proper offset. The spacers here are a good solution to flush out the factory rims. They appear to have short studs that are only going to work with OEM GR wheels and the OEM shanked lug nuts. Bonoss will make any spacer you want though - you can spec width, you can spec centerbore (so there would be no need to run centering rings) you can choose stud length and pitch, you could even change bolt pattern.
@Conn0rKent
7 ай бұрын
@lannym I'm trying to use a set of wheels from a previous car for my summers but they've got an offset difference of about 20mm so I was thinking spacers were the way to go. Unfortunately the OEM lug length has me all sorts of confused, might just need to do some more research on my end for a solution. Anyway, I appreciate the reply!
@vrsaceimg
6 ай бұрын
The studs are slightly longer than the OEM fronts. I would say 3mm barely anything but still enough to mount a wheel. I agree with Lannym on aftermarket wheels and spacers. Pick the right offset in the beginning.
@jayrich7720
7 ай бұрын
Fitment 🤌🏾
@Carl_JohnsonOGF
7 ай бұрын
I wish they still had this color for the circuit edition in 2024
@zeesu619
7 ай бұрын
Dam love this colour
@zeesu619
7 ай бұрын
Put those legs away from under the car
@zeesu619
7 ай бұрын
Please
@basedsideways9135
8 ай бұрын
looks dope gunna have to copy
@GRiKey
8 ай бұрын
I got mine done yesterday. Looks soo good.🔥
@noobpies137
8 ай бұрын
How usable is the back seats? I’m 5-11 90% it’s just me but curious how the space space for adults
@eatmynuggiez8911
8 ай бұрын
HOLY SHIT SHE LOOKS BEAUTIFUL, whats her name and her social security number?
@BpgaMusic
8 ай бұрын
this went hard . beautiful fit
@godspeedtenga
8 ай бұрын
Proper spec.
@breaks_n_stuff4049
9 ай бұрын
103 is way too much. Factory is 76
@K03sport
Күн бұрын
shoot, even my wrx is only 89lb-ft on the OE stud/(19mm) lug nut. interestingly my Mazda is 80-108lb-ft on the 21mm lug nut and it is 5-bolt as well.
@MrTrack66
9 ай бұрын
Damn thats clean really nice! Whats the specs on those rims and is there any rubbing or scrubbing?
@johnnysepulvedatv
9 ай бұрын
I’d go circuit edition if they offered it in black. Leaning towards premium for that very reason.
@John-nz1lc
9 ай бұрын
Lookin perfect! Does it rub? And did yu roll the fenders?
Пікірлер