LCR 22 was the worst firearm purchase I ever made. All the grips for it are way huge for it.
@34dawgsgo
21 күн бұрын
Recently picked up the LCR in .357. Was going to change out the factory Tamer Hogue grip as I was thinking I wanted a full purchase. Much to my surprise the Tamer fits fine and I know it's better for pocket carry. Glad I waited. Good review.
@nodrtbike
27 күн бұрын
You have girl hands!
@nodrtbike
27 күн бұрын
Just leave it the way it was… you ocd gun guys that buy a gun and then change it are stupid.
@34dawgsgo
23 күн бұрын
Have to agree with not wanting your pinky dangling. Matter of preference on that.
@nodrtbike
27 күн бұрын
What! No scope or bayonet!
@TT-ch2pz
2 ай бұрын
Very helpful. Thank you.
@danb48190
2 ай бұрын
Can you tell me which front sight that is?
@TheLoneRanger745
2 ай бұрын
This 586 - L comp. Is the Larger frame 7 shot version of the 19 -k frame 6 shot carry comp . Much better for 357
@Yoko.Kurama
2 ай бұрын
The frame size of this is equivalent to a Smith J Frame?
@exothermal.sprocket
2 ай бұрын
Calibers with less recoil than .38 (and +p and .357mag), such as the .32 H&R mag, .32 S&W Long, or the .22wmr, .22LR are going to recoil enough less that some G10 or non-tamer padded option would be tolerable, I think.
@botvenikmikail-qv6od
4 ай бұрын
Nice one that maybe recommended to footmen of the cops..❤
@1smallball
7 ай бұрын
Great video, no wasted time. Thanks for making this.
@dopagony9946
8 ай бұрын
Smith and Wesson's quality control is dog shit.
@yo8514
8 ай бұрын
Beautiful second thought 627 they say is to heavy and little more bigger. But i see that that 686 is good enough fire power after all is magnum
@BADD1ONE
10 ай бұрын
Are the grips for 357/38 the same for 327
@spudboyQ
10 ай бұрын
That looks a lot like a throw your ammo on the ground contrsption.
@davidspin5353
10 ай бұрын
I have the 38 special, but damn is it ugly compared to a S&W
@boricuaarecibo9259
Жыл бұрын
How is the bluing? And what is the double action trigger pull weight. I want to get this gun but i want to see it in person. I'm hoping the bluing is like my 586-8 and 29-10 classic but it doesn't look like it is from this video. Does anyone know how the bluing is and trigger pull weight
@len-zeplin480
Жыл бұрын
Thanks for Sharing video!
@stevenrichardson4928
Жыл бұрын
The S7W 586 L-Comp or the 19 Carry Comp? Why? Thanks!
@TheOfficialCaseMade
Ай бұрын
That's what I would like to know! The L Comp seems like the clear choice with an extra round, but I don't know if that justifies an extra $300.
@kenhoward3512
Жыл бұрын
The G10 grip looks absolutely great - but I can easily imagine how it feels with even regular .38 Special, not to mention, +P (or .357 !). Each one is a compromise of one good feature for one bad, for either appearance, accuracy, concealment, or comfort. The Pachmayr Diamond Pro might be a good overall compromise.
@JJ_SDWR
Жыл бұрын
Hey, have you noticed any accuracy issues when NOT using moonclips? Thanks?
@mavanijj
Жыл бұрын
Grip❤❤❤😌😌
@Roscoe_357
Жыл бұрын
Is The Ergo Grip For The LCR Any Good??
@PH-xz4yz
Жыл бұрын
Looks funny but works great
@billdee6398
Жыл бұрын
Smooth.....❤
@jamesm7649
Жыл бұрын
At that price point it should come with one of their speedloaders instead of the strip
@weissrw1
Жыл бұрын
I bought 2 of them back when they first came out. At the time they had the best trigger EVER on a snubbie revolver. One was for my sister. I shoot .38 Special rather than .357 -- because for personal protection up close we don't need to crack engine blocks. The only arguably better trigger now is the Kimber K6S.
@edbigtruck
Жыл бұрын
The G10 Grips great. I have an LCRX in 22WMR. Would like to try that grip on it.
@kylepearson5572
Жыл бұрын
Stippling not stripling
@misssassycompany9950
Жыл бұрын
How’s the trigger?
@beardedgunguy7251
2 ай бұрын
Amazing, better than my S&W PC revolvers
@Wysiwyg101
Жыл бұрын
Quick question for you. It appears as though you have the cyclinder set up for moon clips. Did that come stock or did you have that done somewhere?
@louisdufour4106
Жыл бұрын
I purchased mine and after first rounds, I reloaded, and went to open cylinder and cylinder latch stuck with gun loaded. Been reading about problem. First will need to go to desert and MT the cylinder the old fashioned way. Second is unscrewing cylinder latch and using mallet tool to strike side of cylinder to see if it releases after it's unscrewed. I should have MTd cylinder at range but didn't understand problem until I took it home to digest problem. Mine is the performance center sñub nose 8 shot. Kudo's for Smith and Wesson making a 357 with 0 recoil on a 357 mag load. Shoots like a 22
@jonzylka9474
Жыл бұрын
I have the 986 which is basicly the same gun only in 9mm. Now that is a FUN gun to shoot. I shoot it more than any of my semi autos, and its accurate as all hell!!!
@douglasknepp3609
Жыл бұрын
Speaking into the 🎤 mic would be helpful
@kimblehosey7930
Жыл бұрын
986
@JudoYoNeck
Жыл бұрын
Hey there! so, I got the same build with the Bantam boot tamer grips with the trijicon sights, I had a gun store worker put the bantam grips on for me, but he took out one of the blue cushions inside the grip, when I told him I wanted the blue cushion inside we couldn't take the bantam grip off the revolver, any suggestions?
@dangerousfreedom4965
Жыл бұрын
Price$?
@MarcoFromTropoja
Жыл бұрын
I bought the same exact one about a month ago and it had some issues with it. Finish was really bad on the barrel flats and the crown had a pretty bad ding in it. Brand new….i sent it back and still haven’t heard any update. I’ve actually had to send back just about every smith and Wesson I’ve bought in recent years. Their quality control is absolute crap nowadays.
@WheelgunsOnWheels
2 жыл бұрын
Good coverage of carry options. Get you the G96 bluing marker and make that blemish from your drill Chuck disappear in seconds. It’ll actually reblue that tiny spot without any prep or difficulties. I use it on my blued models that get nicked on occasion. Click my name and it’ll take you to my video displaying it in action. Well worth 8 bucks.
@michaelkraus4135
2 жыл бұрын
Hogue EXTREME SERIES GRIP !
@denniskennedy534
2 жыл бұрын
Can't here him
@13cornstar
2 жыл бұрын
Just got this about a week ago now. Took it to the range and went through about half a box of 38sp. Switched to 357 mag and after three shots the front sight went flying. They sent me another sight but it slides right through it has to go back.
@brianbomar9900
2 жыл бұрын
They must have cut the dove tail too large. I have the same gun and love it. Never had an issue but wish there was options for a different front sight like a Big Dot. I'd be interested in the end result after coming back from the Smith factory.
@usmc249
2 жыл бұрын
I got my 686 competitor and the finish quality was horrible it looks used, don’t know if it came from factor or shop shot it. It took 3 month with a new barrel and finish. The trigger is still not “performance” to me. Nice snubby.
@leerx7015
2 жыл бұрын
I'm having a hard time finding an outside the waist kydex for my lcrx 9mm. please let me know if you do...
@scotteger6271
2 жыл бұрын
Legacy Firearms makes one, the Griffin I think…pricey but if you can’t find one. They make some really nice IWB holsters for the LCR.
@leerx7015
Жыл бұрын
@@scotteger6271 thanks!
@rayhanes1347
2 жыл бұрын
Wondering if you can use that blue insert in your Hogue, G10 grey grip. Have you tried?
@Peter-der-gute-vegane-Hirte
2 жыл бұрын
Does it work without moonclips reliable?
@beardedgunguy7251
2 жыл бұрын
Very reliable, have not had a single issue.
@paulyoung4814
2 жыл бұрын
Thanks
@larrywoods2304
2 жыл бұрын
I'm confused the 2 inches or the 3 inches K6s there both Awesome gun's
Пікірлер