Thank you. Yes, I do, but most of these cuts were not square. Most were at odd angles. I will add some corner molding next with some floor accent lighting.
@darryldickson4360
4 күн бұрын
You also should have lowered the exhaust fan so it would draw air through the generator and not over top of it
@darryldickson4360
4 күн бұрын
Yeah you me want to try some insulation
@petenelson8136
5 күн бұрын
Well done. I'm looking to get the same generator because I've got NG at the house and had it plumbed (gas to where generator would go, and plug on outside of house to main breaker box) for a generator when I had the house built. I was looking for a shelter to build to put the generator in and y our design and thought on what was needed were outstanding. Thanks for sharing.
@billashlock985
6 күн бұрын
Bull if you finance or are independent contractors you can't get subsidized by tax incentives
@Oldmanburt66
13 күн бұрын
With them big ole tire's you can drive down the road eat a slice of pizza 🍕 probably a coke...I don't know..
@reefling6237
17 күн бұрын
the hinges were laying on the ground in the shot. I just put this shed together....
@JorgeHernandez-tw9ez
23 күн бұрын
Bruhh dont trim 🤦🏻♂️ get a lift man
@stfatpat
Ай бұрын
Thanks
@evergreenUX
Ай бұрын
Can you share where you got the curtains and those leather snap hold backs
@Los.Trevino
Ай бұрын
I made the curtains, double layer canvas with a heavy fleece core. The tie backs are actually unfinished leather bracelets from the craft store. I just stained them slightly darker. They come with the snaps already attached.
@evergreenUX
Ай бұрын
What brand and color and type of paint is that green color on the cabinets?
@Los.Trevino
Ай бұрын
The green is spray paint. Rustoleum Painters Touch Oregano in satin.
@markhanson6649
Ай бұрын
Great video!!!! New parts would never have you thinking they were out of adjustment!
@jrcannjay8016
Ай бұрын
What was the battery light?
@5StarGarage
Ай бұрын
I put a new battery in it. Still having the same problems. Starting to think it might be ecu capacitors.
@9teen0fouryt6
2 ай бұрын
What injectors are you running??
@5StarGarage
2 ай бұрын
Obd1 injectors. At the moment, I use RC ones.
@9teen0fouryt6
2 ай бұрын
@@5StarGarage did they fit good? Stock ones didnt fit
@5StarGarage
2 ай бұрын
Yeah, i didn't change anything to fit the obd1 injectors. Just the harness.
@wingcover
2 ай бұрын
Awesome Vid!. I have a 93 XLT that for some reason, only has powered windows in the front. I also broke the drivers rear. Do you know if the harness handles a swap? (PW in rear).?
@5StarGarage
2 ай бұрын
I'm not sure. But usually, if the front has power, the whole truck does. Might take a look at the rears and see if you can find a harness.
@chrisdesimone4249
2 ай бұрын
You are so like me lol, looks like you had a blast doing this
@RogerSayers
2 ай бұрын
Thanks for the fantastic video. I'm faced with this problem right now. I should be able to fix it after watching the video. Thanks again.
@theccwdad
2 ай бұрын
Skyjacker makes a 4" and a 6" lift for the 2wd obs f250 and f350. Confirmed fitment from Rocky mountain suspensions.
@hello-uk7zd
Ай бұрын
Yes sir, it was a BEAR to install but got it done!!! Not happening without a lift, helper, high lift transmission jack, air hammer, quality drill bit set, and cut off wheels for all the rivets you’ve got to delete!!!
@taylorcampbell985
2 ай бұрын
How hot is the air in the shed when running over period of time? Have you run it for a long stretch to test it?
@JakesMusicPalace
2 ай бұрын
In addition to many of the other useful comments here consider adding 2 exhaust tubes one inside the other to be used as a heat shield diffuser , the outside tube to be much cooler to keep you, kids and pets from getting burned. There are a few types of fire and heat resistant insulation materials out there to use on the inside of the cabinet for more sound control. Building a second or add on box made out of fire resistant plywood, connected to the plastic enclosure via the exhaust tubes, used only for exhaust gas baffle chamber, lined with fire resistant insulation. A couple of baffles in this chamber will greatly reduce exhaust noise. If built correctly, the engine exhaust back pressure will not be affected. Painting the inside of the entire generator enclosure with EMF resistant paint, and copper tape for all gaps for EMF protection will only work if one hundred percent of the Gen. enclosure is covered. There are companies making copper thread impregnated sheet materials for this in addition to the paint. Only practical when the Gen. is not in use, but better than nothing. One last thing, if you also baffle the cooling intake/fan, and the sound level will go down even further. Great video and comments, thanks for sharing 👍👍
@RedBearCarpentry
3 ай бұрын
Wicked job! How did it you fellas patch the left side where the vent cover was? Thanks!
@5StarGarage
3 ай бұрын
With a fiberglass patch panel. We just glassed over it.
@mendezgarage6487
3 ай бұрын
What shift linkage are you using I'm having issues getting into gear
@5StarGarage
3 ай бұрын
The stock one for D series.
@ItsAlive111
3 ай бұрын
I hope you all are doing ok with Beryl and the generators
@5StarGarage
3 ай бұрын
Yes sir! Longest I have ran this setup so far. 3 days straight. A/C 3 fridges some outlets and a separate shop apartment mini split. Geni did great. Got about a hour each gallon. We just got power today. I will probably do some maintenance on it. Oil change/ Plug/filter.
@codymisner-ward1806
3 ай бұрын
That's fucked
@chchchscott1
3 ай бұрын
Looks goofy
@TinoushGTR
3 ай бұрын
Just got mine. I haven't used it yet but testing it yesterday I found out that if you hold the button it shows pause. I think that's how you can open the lid.
@markrottjakob2670
4 ай бұрын
That screen jumping around is annoying.
@ya472
4 ай бұрын
I guess I need to research these type of axles, as I would think they should be trailing arms, rather than pointing forward?
@Los.Trevino
2 ай бұрын
These types of campers are set up in the leading axle orientation. They have a drop floor in front of the axle that prevents it from being used in the standard orientation.
@Hannelore7
4 ай бұрын
Im in Arizona and have scheduled hook up for house..now just trying to figure out a shed. Im a woman alone . Couldnt I just open one door for the exhaust if I have the shed 20 ft away from house? Not sure I can rig it like you did.
@5StarGarage
4 ай бұрын
I would make a hole for the exhaust if you have it set up like me. Because the exhaust gets really hot and would melt the plastic. If the exhaust port isn't facing plastic, you could just open the doors.
@Hannelore7
4 ай бұрын
@@5StarGarage Aw got it..Thanks.
@Hannelore7
4 ай бұрын
@@5StarGarage Thats what I will do..have the exhaust face out when I open the doors. Been going crazy trying to figure it out. That should cut the noise down good enough. Thanks for answering.
@paulm283
4 ай бұрын
It looks like a truck got punched in the face 😂
@troutaholic8834
4 ай бұрын
Made it to the music and left
@5StarGarage
4 ай бұрын
Sorry...early video. Still learning
@margiemudge6607
5 ай бұрын
Looking good!!!!! Can you tell me where to get replacement windows?
@Los.Trevino
2 ай бұрын
Facebook groups, ebay, etc. It can be a bit of a hunt.
@farva75089
5 ай бұрын
WHAT IS THIS TFL????
@MadMan559est69
5 ай бұрын
Folks, don't trim your bumper, shim it out a bit. I used longer bumper bolts and a few stacks of those large square washers in the fence item location at home Depot.
@bernahernandez6508
5 ай бұрын
Pura chingoneria de camionetas Saludos de SLP México
@mosthated8186
5 ай бұрын
Does the bumper bolt right up/fit with no issue?
@5StarGarage
5 ай бұрын
After you modify it, it bolts up. It won't just bolt up stock. You have to cut the top off and plastic weld a m35/45 bumper top piece so your headlights match up.
@MeirCohen.kingbibi
5 ай бұрын
Pretty nice 👌
@brianread259
5 ай бұрын
Your hinges are right there…..the grey hook looking things
@5StarGarage
5 ай бұрын
Yes sir those are the hinges. But they also use to include some metal ones. At the time you could request them and they would mail them to you. They stopped that already. Plastic ones are good tho. I haven't had a problem with them yet.
@charlie7975
5 ай бұрын
Nice video. Now that you've had it a while, how is the solar charger working out? Does it keep the battery charged?
@5StarGarage
5 ай бұрын
Still working. I haven't had to replace the battery and starts right up.
@charlie7975
5 ай бұрын
@@5StarGarage Did you get the 1.5watt unit?
@5StarGarage
5 ай бұрын
Yes sir!
@XxAtomic646xX
6 ай бұрын
that solar panel isnt waterproof according to the listing
@larrybenzs550
6 ай бұрын
Did your harness come with the purge valve wires
@5StarGarage
6 ай бұрын
The Crx or obd1 doesn't have a purge valve that I'm aware of.
@henmich
7 ай бұрын
I'm mad at you for getting a free Trinco blast cabinet. How dare you? lol That does not happen here.
@williamlloyd854
7 ай бұрын
Well done. Well done.
@MrAlembicMan
7 ай бұрын
If it sits for awhile my 95 f350 always seems to stick until I mess with the slider pins and drive it for awhile. Also took the brake fluid cap off and pumped the brakes and then put it back on. Popped the bleed valve and whacked the caliper until fluid came out. Hocus pocus . Probably because it was sitting outside all winter. Happens every spring...
@MrAlembicMan
7 ай бұрын
Here to watch the f350 stuck calipers info I don't give a flying crap about the Honda fuel pump issues!!! Maybe at the end of the video. I'm sitting here with a stuck caliper just greased the pins.. might be the lines. Appreciate the f350 stuff but it was very frustrating watching 2 minutes of Honda fuel pump crap! Lol...😅If you're making an f350 video no one cares about a Honda fuel pump.
@CockedAndReady
8 ай бұрын
This meet sucks
@stevieburlison1901
8 ай бұрын
Absolutely trash video/diy.
@squirrel3443
8 ай бұрын
We have one caliper (rear driver) locking up completely OR dragging intermittently for the past year. The truck is fine in warm weather but when cold weather goes then goes the following day (Texans will understand) that seems to be when we have the problem unless it’s a fluke. Mechanic said he test drove, found nothing, and to come pick it up. Not sure what to do. We checked what we could and everything seems ok. The first time the caliper locked up it locked so hard it cracked the pistons. We replaced both rear and all the brakes at that time. Our rotors are warped but not “bad” is what the mechanic said. We have noticed our electric vacuum pump will make a buzzing or groaning noise when WTS. Thoughts on why one but not the others?
@svkojdm
9 ай бұрын
What camber kit do you use for crx or DA? Or are they the same?
@5StarGarage
9 ай бұрын
I haven't put one on yet. But I would probably try crx.
@mandaloria9761
9 ай бұрын
Hiya from Cypress Texas. I really like the bunk bed remodel. Could you please share the outside paint person. I'm redoing my 1980 Boler as well. Thanks
Пікірлер