This sole feature steered me away from this truck. That's freaking insane.
@ruchirsajwan
4 ай бұрын
The halogen connector had the red on the right, and you out the red on the left in the led one. Why?
@jaysultani4450
5 ай бұрын
how would you replace the bulb on 2021 headlight ?
@mooch91
6 ай бұрын
Do you recall if both sides (left and right) required swapping of the red/black wires on the connectors? Would like to get it right first time. Thanks!
@KM-qo2xz
6 ай бұрын
Yes I believe I swapped both sides because the initial swap on one side was correct so I figured why not try both and they worked.
@mooch91
6 ай бұрын
@@KM-qo2xz Thanks for the response and thanks for your video.
@mooch91
6 ай бұрын
@@KM-qo2xz Can confirm - I swapped both of mine when I switched them over and they lit up on the first try. Thanks! 😀
@brianf.3048
9 ай бұрын
Thanks for the video. Just swapped out ours, and this video made it a cinch.
@Popcornbeetle
Жыл бұрын
Is it only 2021 model that are backward compatible or any 2021+ led oem headlights?
@KM-qo2xz
11 ай бұрын
It should be any 2021 and up OEM LED headlight, as long as it has the LED low and halogen high beam
@Sheevness
Жыл бұрын
Touch controls in general are just another distraction while driving. Headlights especially need to be something that can be done without looking. And, I'm not surprised they are faulty.
@Izheets
Жыл бұрын
This is one of the many reasons that it’s so hard for me to go back to GM. I really like the new Colorado and Canyons, but I have no faith in their reliability. Owning other GM products in the past, they always had one major problem or another come up, and many other minor problems. Fit and finish was also terrible. I really want to like the Colorado, it’s a good looking truck, but I can’t get past the reliability issue. I hope they can do better.
@RossMalagarie
Жыл бұрын
Yep I am a GM guy as thats as thats all I ever buy but those new Toyota Tacomas are looking good. And the reason why they double the sales of their competitors is probably reliability and resale value. I wanted to get a Gen 3 Colorado Trail Boss but I will definitely wait a few years to let them get the bugs out of this new electrical system the only problem is I read they are going to a new electrical system in the 2024 so it will start all over again with finding and fixing the bugs.
@HiPlains1
Жыл бұрын
Definitely file a complaint with the NHTSA. This is a serious safety issue. GM already stated that the headlights run independently from the HU's SW. This proves that it not.
@ScottCadle
Жыл бұрын
Just retrofitted 2021headlights into my 2014 4Runner. Thanks for sharing. Made the connector swap easy!
@user-sg5mg9iv4i
Жыл бұрын
Where did you purchase the ‘21 headlight?
@KM-qo2xz
Жыл бұрын
Check the video description,
@jonathanwick5331
2 жыл бұрын
Hello! Do you think by cutting the cables and solder them together would work as well? I recently bought a 2021 headlights but the previous owner cut the ends (connectors) to retrofit it into their new headlights. Any help would be greatly appreciate it!
@KM-qo2xz
2 жыл бұрын
It should be fine to re-solder the lines, you just have to make sure you have the LED low beam only headlights. If you get the Bi-LED headlights you’ll have to run a separate power wire for the shutter
@jonathanwick5331
2 жыл бұрын
Thanks for your reply and willingness to help! Do you know what color wires goes together to be soldered? I don’t want to cross them out and fry the wires, that’s going to create a bigger issue.
@KM-qo2xz
2 жыл бұрын
Good news is you won’t fry anything if the wires are incorrect. I would suggest connecting the wires temporarily and test to see if the light comes on. If it doesn’t then switch the wires. It’s the same as in the video, if the polarity of the wires is incorrect just switch them and the light will work.
@marwankalian4995
2 жыл бұрын
I’m little confused , because the 2021 headlight that I have, has 3 pins instead of only 2pins , any idea here ?!?
@KM-qo2xz
2 жыл бұрын
Sounds like you have the light that uses your low beam as the high beam as well. There were two different lights for the 4Runner in 2021. The light in this video uses a conventional halogen bulb for the high beams but still had LED low beam. The other light uses a shutter that blocks part of the low beam pattern and moves out of the way when the driver calls for high beams. As far as I know, there is no retrofit option at this time for the headlight with shutters unless you get a custom adapter harness.
@marwankalian4995
2 жыл бұрын
@@KM-qo2xz no I have high halogen and low LED
@luisalejandropenalvergrube7482
2 жыл бұрын
Hello, the truth is that I am bad at doing this type of work, would you be able to help me with this? How much would you charge me to do it? Let me know if you can, I live in West Seattle and I can move wherever you tell me, thanks
@onlinesearch4134
2 жыл бұрын
Thanks for this helpful video. So if I understand this correctly….purchase the ‘21 headlamp units, change the connectors, and nothing else needed to get LED lighting for pre ‘21 5th gens.
@KM-qo2xz
2 жыл бұрын
Correct
@jackvang87
2 жыл бұрын
I assume this applies for the 22 non-pro/limited headlight retrofits as well right?
@KM-qo2xz
2 жыл бұрын
@@jackvang87 I would say that’s a good assumption. I don’t believe there were any changes between the 21’ and 22’ non Pro/ limited lights
@bkade2184
3 жыл бұрын
KM, would know anything about the wiring for the 2021 nightshade bi-led headlight assembly. I found an awesome deal for a set but haven’t come across anyone who has done the swap. I’ll be putting them into my 2018 runner. Thanks!
@KM-qo2xz
3 жыл бұрын
Unfortunately I don’t. I picked the low beam LED setup specifically because it was semi-plug and play. a lot of other folks are reporting the halogen high beam setup is the way to go for more light output. the Bi-LED setup seems to be pretty underwhelming.
@bkade2184
3 жыл бұрын
@@KM-qo2xz I actually checked out the sellers passenger side bi-led assembly. There were 3 wires going into the lamp. If I remember correctly black, purple and pink wire. Figured I could use the ‘21 drl as the drl/high beam since it’s the same bulb and hopefully figure out how to utilize the LED low only. Seller is asking $400 for the pair.
@dillydallen3725
2 жыл бұрын
@@bkade2184 Hey, did you figure this out?
@artemkhomenko922
2 жыл бұрын
Hey have u been able to figure this out? I also have the three wire headlight but not sure how to wire it.
@artemkhomenko922
2 жыл бұрын
@@bkade2184 thank you
@anthonyl4894
3 жыл бұрын
Was it as simple as swapping the connectors in order to make the new LED headlamps (low beam) work in a 2020 and older 4Runner?
@KM-qo2xz
3 жыл бұрын
Sure was. Everything fit exactly as a pre-2021 headlight would. Just swap the plugs and install the headlights just like normal
@jsb773
3 жыл бұрын
Thanks for the video and instructions! Any chance you have a video of the before and after showing the difference in light output and how the new lights operate?
@KM-qo2xz
3 жыл бұрын
I don’t have a before and after but honestly this video even in daylight shows a decent difference between the halogen and LED headlights: kzitem.info/news/bejne/woGkzpyabYJ_hGU The new lights operate exactly the same way as the halogen lights. The only difference is the low beam is LED
Пікірлер