This is fantastic. Did you get what you needed for it? That Gemballa kit combined with your gear, wheel, brake and color choices. Perfection!!
@rien2080
Ай бұрын
what gauge cluster is that? it looks really cool
@leehornnerd
Ай бұрын
What do you think is the difference between those?
@clifnotes9091
Ай бұрын
The plastic sounds good, but the brass resonators have more projection. Slightly more clarity and brings out more of the horns character.
@AxelMar-l1v
Ай бұрын
I love your car. I also have a mr2 spyder. I'm wondering where did you buy your body kit?
@clifnotes9091
Ай бұрын
Turismo UK
@AxelMar-l1v
Ай бұрын
@@clifnotes9091 Thanks for the info
@REALJORDAAAN
19 сағат бұрын
@@clifnotes9091 love the car how much for the entire project?
@cellynovilela6282
2 ай бұрын
Onde encontro um desses ?
@clifnotes9091
2 ай бұрын
@@cellynovilela6282 Infelizmente eles não fazem mais esse baixo específico com incrustações de bloco. Foi uma edição limitada da Sweetwater. Você pode encontrar um usado no eBay ou Reverb.
@50shades_of_memez
2 ай бұрын
Love this good job!!!
@clifnotes9091
2 ай бұрын
Thanks!
@BradleyThomasbassman
4 ай бұрын
Nice deep bottom on this Squier. Thinking about putting flatwounds on it if I buy it.
@maximumrebo2030
4 ай бұрын
First Good looking spyder
@clifnotes9091
4 ай бұрын
Thanks! It belongs to a new owner now. It looks better than ever now.
@juliusvonvisconti9206
5 ай бұрын
Bro, this car is so beautiful. I love it 😎👍
@clifnotes9091
5 ай бұрын
Thanks!
@beforemanhattan
6 ай бұрын
Great sounding bass! How is the qc on this bass like fretwork or any other issues?
@clifnotes9091
6 ай бұрын
The bass was built like a tank! One of the best basses I’ve ever owned! Everything was even and solid. This was an earlier KSD 6 string so the hardware and quality was excellent. When you upgrade the pickups and preamp in those basses they rival the tone in the more expensive ones.
@beforemanhattan
6 ай бұрын
@clifnotes9091 thanks for the reply! Good to know about the upgrades. 🤘
@juanmireles9850
6 ай бұрын
Its a beautiful car looks exotic .. What 5 lug conversion did u switch to and what are your wheel set up ? I'm looking forward to purchase a similar wide body kit for my mr2
@clifnotes9091
6 ай бұрын
Thanks! I used 4 to 5 lug wheel spacer/adapters.
@juanmireles9850
6 ай бұрын
@@clifnotes9091 the 5x100 adapter?
@clifnotes9091
6 ай бұрын
@@juanmireles9850I can’t remember the specs, but the total spacer/adaptor bolt pattern depends on what type of rims you have. They were custom made to my specs so that the rims and tires were flush with the kit.
@juanmireles9850
6 ай бұрын
@clifnotes9091 oh okay thaks I just or a lp super warrento from luxurycarpart from Taiwan and I was just wondering but I'll wait untill I get the kit then I'll find what specs I need to run . I kwap my mr2 ..thank you for the information
@clifnotes9091
5 ай бұрын
@@juanmireles9850No problem! Good luck on your project!👍🏽
@kashinin9268
6 ай бұрын
Did you sell?
@clifnotes9091
6 ай бұрын
Yes.
@kashinin9268
6 ай бұрын
How much did it go for ?
@kashinin9268
6 ай бұрын
@@clifnotes9091 will you build another ?
@julio-lb2tm
8 ай бұрын
con un 2gr swap quedaria muy bien
@clifnotes9091
8 ай бұрын
Sí, ¡un 2GR-FE estaría muy bien! Lamentablemente me quedé sin fondos para terminar.
@juanpabloosorniocebada4702
9 ай бұрын
You play the bass so very well
@clifnotes9091
9 ай бұрын
Thank you for the kind words! Hopefully one day I will play the bass more than I play the saxophone!😂
@nikibass5064
9 ай бұрын
Helo
@marfredllc5218
9 ай бұрын
where did you buy the modification parts?
@clifnotes9091
9 ай бұрын
What specific modification? Most of the body came from Turismo UK.
@petegalindez9961
9 ай бұрын
Hmm…hard to get a true sense of the sound…for the plastic resos you had the horn farther away from the mic and a little off to the side and it sounded a little stuffier…with the metal resos you were much closer with the horn more directly at the mic making it sound brighter, so hard to really tell…also, is that the same horn? I noticed the low Bb keys look different…
@clifnotes9091
9 ай бұрын
@petegalindez9961 It’s the same exact tenor, neck, mouthpiece reed, everything. I recorded with my iPad Pro. You have great eyes. Looks like I did take a slight step back on the 1st clip. But the audio is true to what you would hear live. I prefer my tone with the metal resos. It’s more livelier.
@alvincornistamusic8754
6 ай бұрын
The other variable is the built in iPad compressor. That is to say when you play loud the iPad will automatically adjust the video volume. This could be the reason why the metal reso clip sounds like there is less bass or mid low in the sound. Also the metal sounds like distortion on loud attacks. But not sure if thats the iPad mic clipping or the true sound. Question was your sax in need of an overhaul at the time you did the swap? Or was it already in great condition and you simply swapped out the resos? And did you keep the same pads? Pads also can tend to have different tones. Thanks for doing this, I'm about to do a change pad so lots of options to decide on.
@albertodiazpr
10 ай бұрын
Looks amazing! Well done!
@clifnotes9091
6 ай бұрын
Thank You!
@dslapster64
10 ай бұрын
Is this bass all original ? Sounds just like the USA Smiths
@clifnotes9091
10 ай бұрын
Hi @dslapster64 The Japanese BSRB Ken Smiths were made in Japan but finished by Ken Smith himself. His signature and date of completion is on the inside of the compartment cover. It has the stock Ken Smith soapbars and preamp that is exactly same as the USA ones.
@clifnotes9091
10 ай бұрын
It’s all stock.
@dsx5036
10 ай бұрын
what break setup are you using for the rear? car looks great from a distance. Once the panel gaps are adressed, it will be amazing. Mad props, bro
@clifnotes9091
10 ай бұрын
Same as front. Ceika big brakes for the MR2 Spyder. Thanks!
@ThreeMoonsArc
10 ай бұрын
This thing looks so cool. Also, hello, fellow saxophonist here. I play alto and tenor.
@clifnotes9091
10 ай бұрын
Thanks! Just sold it. Great to meet another fellow saxophonists! Blessing to you!
@ryanchen9010
11 ай бұрын
carrera gt look? beautiful
@clifnotes9091
11 ай бұрын
Thanks!
@Alberto_2324
11 ай бұрын
In which store did you get the entire body kit?
@clifnotes9091
10 ай бұрын
Turismo UK
@matthewbrickman8287
Жыл бұрын
Love the round knobs for the a/c. Where’d you find those?
@clifnotes9091
Жыл бұрын
I forgot where I got them from. You have very good eyes! I forgot that I upgraded those too!😄But they belong to another vehicle that fits perfectly on this car. Once I look through all I’ve purchased and find out, I’ll reply here.
@clifnotes9091
Жыл бұрын
I think they are from a Toyota truck. Not sure of the model.
@matthewbrickman8287
11 ай бұрын
Tacoma possibly?
@clifnotes9091
11 ай бұрын
@@matthewbrickman8287I think so. Try Amazon.
@Strawfungus
Жыл бұрын
What. A. Car. Looks amazing!
@clifnotes9091
Жыл бұрын
Thank You!!!
@twrcrew8852
Жыл бұрын
is this on bags or an air cup kit?
@clifnotes9091
Жыл бұрын
Air bags
@MrMuffanga
Жыл бұрын
Wheel setup and suspension setup needs adjustment in the front. Other then that it doesnt look bad. Panel fitment could be a little nicer. But as for someone who does autobody for a living. It turned out good
@clifnotes9091
Жыл бұрын
Thanks. It’s up for sale, for someone who can finish it properly. It’s currently on eBay.
@latincommunityawards3571
Жыл бұрын
spectacular
@clifnotes9091
Жыл бұрын
Thank you so much!
@latincommunityawards3571
Жыл бұрын
How much do you spend approximately friend? How much do you spend approximately friend?
@clifnotes9091
Жыл бұрын
Around $30,000 total. It still needs some bodywork finished. It’s for sale eBay.
@latincommunityawards3571
Жыл бұрын
@@clifnotes9091 have link ebay
@latincommunityawards3571
Жыл бұрын
@@clifnotes9091
@STINickTuned
Жыл бұрын
Great build! Which rim setup did you go with to fill out the rear?
@clifnotes9091
Жыл бұрын
Thank You! The rear wheels are 19x10.
@thisguy11714
Жыл бұрын
For sale?
@clifnotes9091
Жыл бұрын
Yes. Currently pending sale. EBay.
@thisguy11714
Жыл бұрын
Let me know if the sale doesn't go through. I'll pay 17
@clifnotes9091
Жыл бұрын
@@thisguy11714 I will.
@clifnotes9091
Жыл бұрын
@@thisguy11714The buyer did not pay. Wasted my time! It’s back up on eBay.
@Thisyoutubechannel02
Жыл бұрын
Where did you get the interior upgrades from?
@clifnotes9091
Жыл бұрын
Modified Turismo UK interior kit customized to fit Left hand drive dash.
@tialabdullah7001
Жыл бұрын
I have an mr2 and hate how big the headlights and taillights are and what you did makes it perfect. What body kit did you use if you don’t mind me asking?
@clifnotes9091
Жыл бұрын
Turismo UK makes the kit.
@northantsred3875
Жыл бұрын
Sorry but that looks shit. Wheels are awful and the car looks like it's been squashed. There are good and bad kit cars and this I'm afraid is bad
@mikecoldsnow5464
Жыл бұрын
what is the suspension set up? I'm doing I different kit and having trouble finding the right offset for rim etc. what bags and air?
@clifnotes9091
Жыл бұрын
It has Airtekk air suspension.
@mikecoldsnow5464
Жыл бұрын
If she had a number , id never stop calling. you did everything right. Monocle and top hat finger kiss.. so sweet.
@clifnotes9091
Жыл бұрын
Thanks!
@iamLexxKelsey
Жыл бұрын
best one I heard so far ...what kind of cab was u coming thru
@clifnotes9091
Жыл бұрын
Thanks Bro! I was running it through a Peavey 210TX combo. All knobs were set flat at 12.
@iamLexxKelsey
Жыл бұрын
@cliftonbrady9091 nice nice I saw a 4 string that same model used on guitar center they are more $ then the new limited model
@clifnotes9091
Жыл бұрын
@@iamLexxKelsey Yea, I haven’t seen how much they are worth now. But I do know that I will never sell this thing!😄
@dslapster64
Жыл бұрын
Typical brilliant Smith sound
@clifnotes9091
Жыл бұрын
It does dslapster64. It has the same exact preamp as higher end models and is signed and dated by Ken Smith on the inside. People sleep on the Ken Smith BSRB 6 string!
@unit4945
Жыл бұрын
made in?
@clifnotes9091
Жыл бұрын
Indonesia
@garrylesmana
Жыл бұрын
where did you buy that metal resos?
@clifnotes9091
Жыл бұрын
Hi Garry! I bought them from “Frank Woodwind and Brass Repair.” They are located in Audubon, NJ.
@Kl421970
Жыл бұрын
Great sound and even a better sound with the new resos!
@clifnotes9091
Жыл бұрын
Thank You!
@fredfonseca6034
Жыл бұрын
Hi Clifton!! My name is Freddy. I lived in the Chattanooga area. You mentioned your from Memphis?? I really enjoyed your performance for the church. You were the soprano sax. Thank you for a beautiful performance. I play alto and for reasons I can't explain at that moment I was drawn seeking guiding from the Lord their I found your video. Thank You
@clifnotes9091
Жыл бұрын
Hi Fred! Thank you brother, for your support and kind words! Keep seeking the Lord because he is the source of everything we need! Take care and blessings to you!
@Daddy53751
Жыл бұрын
I would stick a white pearl pick guard on that. It would look like a 5 string Geddy! 🤘🏻
@clifnotes9091
Жыл бұрын
I love the Geddy Lee Jazz basses! I went a different route and wrapped my pick guard in carbon fiber.😁
@Daddy53751
Жыл бұрын
@@clifnotes9091 even better, originality!!! I would actually love to get a Geddy Jazz, but. Would have to redo it so it didn’t look like a Geddy. (Make it my own)
@Daddy53751
Жыл бұрын
As a builder, My real first love (and what lead me to build) is modding. I’ve discovered that as long as the foundation (neck & body) is solid, you have a great instrument. We could have the standard discussion about high end PUs, ect. but as long as you have your foundation, literally everything else is easy to correct and perfect without expensive tools and a lot of skills. I just love great instruments like these without ridiculous price tags!
@clifnotes9091
Жыл бұрын
Well said my friend! I still have this bass. I’ve since then added Bartolini soap bars, a Glockenklang 3 band pre, and hipshot bridge. I love the look and sound.
@Daddy53751
Жыл бұрын
@@clifnotes9091 I’ve got a boutique 6 string bass that’s got Bartolini’s and I’m actually a fan of them. Getting close to 50 years with the bass, and like you apparently, I love changing things to suit me and my wants and needs. I don’t know how it’s gonna work or sound, but I’m actually in the process of scalloping a long scale 4 string neck, just to see. I just might have the only completely scalloped neck, as I’ve never heard of one. That’s some real donkey work though.
@hawkr1575
2 жыл бұрын
How much you paid for this bass brother? They no longer have it on the website, but I’m close to buy a used one, I want to make sure they are not ripping me off
@clifnotes9091
2 жыл бұрын
When they first came out, they were $450. How much are they selling it for? I hate that they are no longer making them.
@hawkr1575
2 жыл бұрын
@@clifnotes9091 thanks for replying, they are selling it to me for $600
@clifnotes9091
2 жыл бұрын
@@hawkr1575 If you haven’t bought one yet, you might want to try eBay.
@ondrejlipl3932
2 жыл бұрын
❤️
@johnathanglover9773
2 жыл бұрын
dang I was not expecting that slap tone
@saidboogeron-the-air9525
3 жыл бұрын
I absolutely DESPISE those nasaly-sounding ceramic pickups on these basses. They have no character at all.
@clifnotes9091
3 жыл бұрын
I respect your comment and honesty. It’s been almost 2 years of owning this bass. Since then, I’ve replaced the pickups ,preamp and bridge. But, I still think it’s a great bass for the price.
@saidboogeron-the-air9525
2 жыл бұрын
@@clifnotes9091 The pre-amp and bridge were probably fine,...it's just the pickups. So what pickups and preamp did you replace the stock setup with?
@clifnotes9091
2 жыл бұрын
@@saidboogeron-the-air9525 I replaced the pickups with Bartolini soapbars and the preamp with a Glockenklang 3band.
@saidboogeron-the-air9525
2 жыл бұрын
@@clifnotes9091 Have you made a recent video of the bass with the new upgrades?
@clifnotes9091
2 жыл бұрын
@@saidboogeron-the-air9525 No I haven’t. I need to post more vids.
@SGTBOAT-ew3bq
3 жыл бұрын
Ask permission What brand of bass string are you using?
@clifnotes9091
3 жыл бұрын
On this particular clip, I have no earthly clue! They were the strings that came with the bass. I assume that they were Fender strings. I since then have used “Ernie Ball Slinky Cobalts” and “D’Addario ProSteels” and I love those more.
@williamgriswold2593
3 жыл бұрын
Do you like it?
@clifnotes9091
3 жыл бұрын
Yes it’s my main axe right now. I did have to change out the pre.
Пікірлер