I picked it up on eBay. If you search for '86140-YV020' on eBay, it should bring up 3 button head units.
@mbirth
5 күн бұрын
Had the 2020 Aygo x-clusiv with MMT (Multi-Mode Transmission), i.e. automated manual. It was so smooth once you learned when the computer decides to shift. Also had enough power to be fun - in and outside of cities. And with the x-clusiv package, it was pure luxury. However, moved to a country with the steering wheel on the other side and had to sell it. Once we're settled in properly, our next car will also be an Aygo. The newer models since 2022/2023 are based on the former Yaris chassis - so they now have a proper CVT and lots of other niceties, e.g. wireless charging mat for the phone, wireless CarPlay, etc.
@jamieaygo
3 күн бұрын
Nice to hear a positive take on the auto versions of this car 👍
@GreenSwede
9 күн бұрын
Great video! I'm currently looking around for my very first car and the Aygo has interested me the most.
@jamieaygo
8 күн бұрын
Awesome. Yeah, it's a great car to start with. I did do a video on the channel about buying one as your first car, so do give that a watch as it may be helpful.
@jamieaygo
8 күн бұрын
You could consider a MK1 Aygo, too. Essentially the same car underneath, but lacking some of the more modern features of the MK2
@GreenSwede
8 күн бұрын
@@jamieaygo Thanks for the advice. MK2 is quite expensive in Sweden from the looks of it, at around 62000 miles they can go for nearly 5000 British pounds whereas MK1 is less than half that which sounds more reasonable for a (hopefully) decent first car.
@jamieaygo
8 күн бұрын
Yeah, great little starter car!
@stillTK
9 күн бұрын
Hi Jamie, I’ve got a 64 plate c1 and it’s the facelift version and looks like the newer ones. But it doesn’t have a screen like your original one but it has just a basic radio system (AM/FM/AUX). Would I be able to do this install? Or do you reckon I won’t have the wiring for it?
@jamieaygo
8 күн бұрын
Yes, I believe so. Although I can't vouch for this personally. There are a few people on the Aygo forums who have done this and it's worth noting that you would need to buy and wire up a reverse camera if you wanted to use one, but from my understanding it's a straight swap. I believe you'd also need to wire up DAB if your car doesn't have it, but if you're not using it then you can skip it.
@jamieaygo
8 күн бұрын
My unit came from a Peugeot 108, so units work across the Aygo/C1/108 range as they are the same car essentially with a different shell.
@stillTK
7 күн бұрын
@@jamieaygo perfect, thanks for that. My radio has DAB so I should be fine. I’ll buy the cheapest part I can find then and hopefully it’ll be a smooth installation
@keith4usa1
9 күн бұрын
Well done this is a Brilliant and 100% true review, i am on my 4th Aygo and no intentions whatsoever to change my Model...
@jamieaygo
8 күн бұрын
Thank you for your kind words!
@nophotoallowed
11 күн бұрын
do you know, add rubber seal to any hole that connected to the door significantly improve soundproofing than any sound deadening material you add. make sure you have no hole from the wheel to the door. thats the noise came from.
@svend9878
13 күн бұрын
hey, i also switched out the 2 button screen for the 3 button version on my 2019 aygo but my carplay isen't working at all, any ideas on how i could get this to work? thnx in advance
@jamieaygo
13 күн бұрын
Hey! Sorry to hear you are having issues. Make sure Siri is turned on/not blocked. You can check that this works by either long-pressing the power button until the Siri icon pops up or saying "Hey, Siri" and it should come on. Does your phone draw power when you plug it into the USB port? Some of these units can have faulty USB ports. If it isn't, try plugging your old unit back in to see if it works. That way, you can send the new one back if it's faulty. If it is drawing power, try using a different USB cable to see if it fixes the problem.
@jamieaygo
13 күн бұрын
make sure your iPhone is up to date, too. Apple have a habit of breaking CarPlay. looking at what firmware version you have on your head unit is also worth doing, as you might have dodgy firmware on it. The link below will talk you through firmware update options - www.toyotaownersclub.com/forums/topic/206295-aygo-3-button-head-unit-software-update/
@svend9878
12 күн бұрын
@@jamieaygo thnx so much for the replies, i will look into this but i believe the issue might lie elsewhere, it seems my usb port isent working at all, so i should get that fixed first
@jamieaygo
12 күн бұрын
Yeah, if that's not working and you fancy replacing it, you can search for the part on eBay. Quite a few on there for 20 quid.
@alistairrobinson3865
14 күн бұрын
At the start of covid just before 1st lockdown, I packed my 2007 aygo with pasta & toilet roll and drove from my house in the utrecht (Netherlands) to my hometown West Yorkshire via Belgium, France, Channel tunnel etc. 14 hours, 1 tank of fuel, 803km = 64mpg Day to day mixed driving never worked it out properly but roughly 55mpg i think, drive very carefully, more for mechanical sympathy/ engine longevity than economic reasons Great video anyway very interesting!!
@jamieaygo
13 күн бұрын
That sounds like an epic journey!
@JosephByrne
14 күн бұрын
I don't know how you didn't stamp on it at some point during the process. I'd have probably done so after seeing the masking tape residue.
@jamieaygo
14 күн бұрын
Honestly, I was close to tears 😂 There are some jobs that change you forever. This was one of them! The silver lining is that I learnt SO much from doing it and I'm hoping I won't repeat the same mistakes again, as I am going to be doing some more painting shortly!
@nikkimaradzika6729
15 күн бұрын
Where do you get the new CarPlay screen from?
@jamieaygo
14 күн бұрын
I picked it up off of eBay. Model number is shared in the video 👍
@alistairrobinson3865
17 күн бұрын
I have a mk1 2007 3 door that I bought with 60k miles on it in 2013, it now has 130k miles and has never had any issues, I get it serviced every year routinely but otherwise just get in and drive, will keep it a few more years but maybe get a mk2 eventually. Great review!! 🙏
@jamieaygo
14 күн бұрын
Thank you for your kinds words! You know, I need to get my hands on a MK1. I'd love to experience the drive and ownership, etc. Love the look of them and I know some people have commented previously that they like the size of the MK1 better than the MK2.
@alistairrobinson3865
14 күн бұрын
@@jamieaygo I imagine the mk1s will become sought after in the next 10 years as us millennials get old and nostalgic!! 😂. Mine reminds me a lot of my mums 91 mini (old shape) I learnt to drive in and my 92 fiat panda first car, except build quality x1000 both.
@jamieaygo
13 күн бұрын
Yeah, that's a good observation. We need to get collecting ASAP 🤣
@Liveyourlifewithafatcigar
18 күн бұрын
Excellent review 👍🏾
@kentownsend7907
18 күн бұрын
What case do you have on your iPhone 14 Pro Max?
@jamieaygo
14 күн бұрын
It's the Liquid Air Case by Spigen. Had it on for a few years and it's been great. I prefer the slimmer ones like this just because they don't add any size or weight really to an already big phone, but you still get great protection. Not a mark on my iPhone.
@paololololol
19 күн бұрын
Shame it isn’t sold in the USA
@jamieaygo
14 күн бұрын
I believe it is, it's just known as Pro Clip.
@ArchAnto
19 күн бұрын
A building is only as strong as its foundations! I recommend don’t jack up on gravel. Level Concrete is optimal
@jamieaygo
14 күн бұрын
Yeah, it's a good tip. I think if you know the risks and try to mitigate them then it's not too bad, but yeah, a level surface is ideal.
@szymonkaczmarek1468
22 күн бұрын
Hey! Is it the same process to upgrade analog screen (the small one) to apple car play? Would it work (project) when phone connected via usb if initially it was just for charging? Thank you for any help!
@jamieaygo
14 күн бұрын
I believe it would, yes. I can't vouch for this myself but there are people who have done it on the Aygo forums (you can just google this and it's the first option that pops up) with great success. It's worth keeping in mind that if you want to get a reverse camera to work with it, you'll obviously have to do the fitting and wiring yourself but it can be done. Let us know how it goes if you do end up doing it!
@furqanrizwan9333
22 күн бұрын
Hi Jamie, have you ever considered doing a boot light retrofit? I'm looking into doing it myself, but it seems to be very obscure
@jamieaygo
14 күн бұрын
Absolutely! It's on my list and I'll be certain to make a video when I do! the new lights are way better in my view, so it has to be done!
@RossPatzelt
23 күн бұрын
Way too low down to see it when in traffic without fully taking eye off the road
@jamieaygo
14 күн бұрын
Yeah, i get that. I used to use it at a glance, which I didn't find too bad, but totally appreciate it isn't for everyone. I now have an upgraded screen with Apple CarPlay, so it acts as more of a holder for my phone, which it does excel at!
@RossPatzelt
14 күн бұрын
@@jamieaygo thanks
@adiamondia
25 күн бұрын
Hey, thank you for your video! I wanna do this upgrade for my Toyota Aygo x play (2016). Do you know how i can find which is the compatible model? Or how to search for it on ebay? Cause simply asking for toyota carplay ofcourse doesnt work 😅
@jamieaygo
24 күн бұрын
If you type 86140-YV020 in on eBay, you should start seeing 3 button head units pop up. Those are the ones you want.
@jamieaygo
24 күн бұрын
Mine actually came from a Peugeot 108 but fits the Aygo no problem as they are the same car in all but name.
@adiamondia
24 күн бұрын
@@jamieaygo Thanks a lot!!
@hvguy
27 күн бұрын
No center vents?
@jamieaygo
26 күн бұрын
No, not on the Aygo. At least not facing you. It's sits on top of the centre console.
@FatherJack-b1u
28 күн бұрын
I have an X-press with those hideous red highlights 😅 Wasn't a fan at first but they have grown on me
@jamieaygo
28 күн бұрын
Yeah, I'm coming around 😂
@alextetens632
Ай бұрын
Does it fit for a peugeot108 from 2015??
@jamieaygo
29 күн бұрын
Hi, Alex. Yes, it will do. They are the same car in all but name. Funnily enough, the unit I fit in my car is actually from a Peugeot 108
@alextetens632
29 күн бұрын
@@jamieaygo Thanks where did you buy it?
@jamieaygo
29 күн бұрын
I picked it up on eBay.
@zelowatch30
Ай бұрын
Putting the doors back is a pain and you should have extra clips in case some break.
@jamieaygo
29 күн бұрын
That's great advice! You can never have too many clips!
@tomy8339
Ай бұрын
You didn't want to give a quick, rudimentary black spray to those insulating mats? It kind of looks terrible showing in the wheel arch.
@jamieaygo
29 күн бұрын
That's a good shout, but I'm going to be pulling it off later, so I figured spraying it would just be a waste. If you are leaving it on, spraying it black is a solid recommendation.
@OnlyMeee-ie3dw
Ай бұрын
Did you really wonder if it was safe to put sound proofing in the wheel wells? I mean, it might be unsafe if you put the stuff on all of windows but in the wheel wells?
@jamieaygo
29 күн бұрын
the adhesive is really strong, so there are no worries of it falling off. The only concern some people may have is that the wheel arch may corrode due to moisture getting in.
@riazhekim2054
Ай бұрын
Your absolutely right Jamie parking is difficult especially if you live in London think of getting one just had enough of big and expensive cars!!
@jamieaygo
29 күн бұрын
Yeah, these big SUV's are only getting bigger!
@ibraheem128
Ай бұрын
The steering wheel on my mk1 Aygo is just too big
@takimara154
Ай бұрын
I wonder, does soundproofing the inside wheel arch had the same effect? And also, how does it performs when it comes to rainy weather?
@jamieaygo
29 күн бұрын
Great questions. On the rear, I actually managed to do both the inside and outside, which is ideal if you can reach both. I'm looking at removing this from the front soon, just to see if any moisture soaked in causing corrosion. Hopefully not!
@jackgriffiths8460
Ай бұрын
Hiya Jamie is your old touch screen up for sale on eBay I think I have brought it 🙏 keep up the good work Jack
@jamieaygo
Ай бұрын
Thanks, Jack! My old screen went quite some time ago, ha!
@gamingmisthios
Ай бұрын
so if I buy the 14-17 model, 0 road tax on it for as long as I own/drive it?
@jamieaygo
Ай бұрын
You'd need to keep an eye on tax rules but as they currently stand, I have paid zero tax for two years and if the rules don't change, looks like it will stay that way. This link is helpful in understanding tax bands - www.gov.uk/vehicle-tax-rate-tables/rates-for-cars-registered-on-or-after-1-march-2001
@DavidToyota999
Ай бұрын
Another great video, thanks. I put some carpet underlay under the rubber boot mat and under the back seat. it made a differece with the road noise.
@jamieaygo
Ай бұрын
Great tip! I've got a video coming soon about how I soundproofed my entire car, so hopefully you'll stick around for that
@DavidToyota999
Ай бұрын
@@jamieaygo i sure will. Thanks for all the vids.
@Mahdillah
Ай бұрын
You did it wrong, there are 3 types of sound proofing for cars. Vibro: remove vibration, prevent metal, plastic to rattle or resonance due to loud subwoofer, we use this to completely remove the sound of rain drops by installing this on car ceiling.The one you install is a vibro. Insulator: as the name suggest, we use this material as 2nd line of defense. Absorber: this is to absorb leakage sound that slip from the insulator. Install facing inside the cabin to absorb car audio leaking to outside and install facing outside to absorb the road and traffic noise. Go for Silentcoat they made they best car soundproofing. Go for noisekill if you want to make it cheaper. Watch CAS audio, they make good tutor.
@jamieaygo
Ай бұрын
Yeah, I mentioned in the pinned comment that this was done during a learning phase
@curiousnomadic
Ай бұрын
Scotty Kilmer would be really irritated that you don't have a breaker bar nor a torque wrench.
@jamieaygo
Ай бұрын
😂
@vlogpresso
Ай бұрын
skate is that you? its great to hear your voice again after so long time no blitz video update. i subscribe mate, i subscribe immediately to this channel 🔥
@jamieaygo
Ай бұрын
Thanks for the sub!
@tillythefairy
2 ай бұрын
My Citroen c1 2015 doesn’t have rear camera tho?
@jamieaygo
2 ай бұрын
Yeah, with that you have a couple of choices. you can buy one and wire it up yourself or as far as I understand, you can just use the unit without one. I'd look into that though on the Toyota Aygo forums. Give it a search on Google and it should come up👍
@tillythefairy
2 ай бұрын
What phone holder do you use
@jamieaygo
2 ай бұрын
Hi! I made a video on it, which you'll be able to find on the channel. It's by a company called Brodit. Video link is here for you - kzitem.info/news/bejne/uqB8m6Wbk5t7qG0
@bobbywarmings9569
2 ай бұрын
tbh i would of bought. NEW PIECE FOR 30 POUNDS
@jamieaygo
2 ай бұрын
Absolutely would have been easier, and I spent time looking for a replacement, but they are really hard to find! It's actually easier to find modded covers for bigger/third party screens than a replacement for the original one. Doing this gave me a chance to learn a ton, so I value it for that.
@tchinounitchou
2 ай бұрын
why the neighbor just buy a 50L air compressor from LIDL? and no thing can compare to spray gun.
@jamieaygo
2 ай бұрын
I guess people feel comfortable with what they know. I'll be on the look out in LIDL for one!
@attilio7
2 ай бұрын
You made all the mistakes so we don't have to. 🤣
@jamieaygo
2 ай бұрын
Exactly!🤣
@Asdfg-fw9ib
2 ай бұрын
Exact same product as proclip
@justarandomguy3969
2 ай бұрын
that is the cheapest jack and stands i have seen in my life, i wouldnt even trust putting my hand under the car with that equipment
@matt5802
2 ай бұрын
quick update.....after going mad with the clear silicon and after heavy rain overnight no leaks are visable. I'm thinking of spraying clear lacquer over the 3rd brake light just to be sure. I've also drilled a small drain hole under the 3rd light inspection cover and cut groves in the foam gasket...so far so good
@jamieaygo
2 ай бұрын
YEEEEEEEEEEEEEEEEES!
@SurrendeRMaS
2 ай бұрын
as I can hear, your mic or recording application has autogain with some level of noise/wind cancelation. you have to use 3rd party sound recorder and set manual gain when recording. if you were using built in camera app then it will always automatically gain and reduce wind effect.
@jamieaygo
2 ай бұрын
I'm using an external mic (Shure MV88) that has no auto gain. You can set gain to match audio sources.
@mrlover4310
2 ай бұрын
I believe the Europeans got a 1.6 in this
@jblasutavario9549
2 ай бұрын
Terrible music? Dude, I want your playlist
@jamieaygo
2 ай бұрын
🤣 It's essentially old school dance (80's-90's), game OST's and UK grime.
@jblasutavario9549
2 ай бұрын
@@jamieaygo Ah. My preferred genres! Lovely 🙌😆❤️
@matt5802
2 ай бұрын
fell out of love with my mk2. Should have bought the Yaris 1.0. Toyota seem to have cut so many corners. There shouldn't be this much water leakage
@jamieaygo
2 ай бұрын
Ah, that's a shame to hear, Matt. Do you still have your MK2 or did you get rid?
@matt5802
2 ай бұрын
still have it - only bought it 5 months ago. I just spent 3 hours taking the boot/lining/rear lights/3rd brake lamp etc apart and went mad with the clear silicone sealer...time will tell if it works.....still think the Yaris is the better car 😩
@jamieaygo
2 ай бұрын
Crazy that it perished like that.I'll keep an eye out on mine, so thanks for the heads up! Has it got a few miles on the clock?
@matt5802
2 ай бұрын
64k on the clock. I had a 2002 1.3 Yaris MK1 with 100k and no problems they build them better back then....now a lot are made in France 🤮
@jamieaygo
2 ай бұрын
Yeah, you wouldn't expect this kind of degradation on something that has only got 64k on the clock. I've got about 55k on mine and I'm hoping it's not going to follow suit! Let me know if the silicone sealer ends up doing the job or not👍
@blankmeme224
2 ай бұрын
The problem with soundproofing especially on a cheap car is for me, when you cancel out one noise, the small rattles before that were quiet are now noticeable 😂
@jamieaygo
2 ай бұрын
You're absolutely right! That's a battle you'll have with most cars in general as when you start cancelling out noise, it's helpful to think of it as you're trying to cancel out a music track. You have road noise, cabin squeaks, vibrations, etc. These all form part of the track you're trying to quiet.
@deleteduser3749
2 ай бұрын
Love the Hey Bear 🎵
@micheals1992
2 ай бұрын
I have an LED strip light the entire length of the roof so it illumates the front and rear seats aswell as giving a bit of light in the boot area when turned on.
@jamieaygo
2 ай бұрын
I'm 100 percent stealing this idea! Any recommendations?
@micheals1992
2 ай бұрын
@@jamieaygo I've used standard strip lights that have a 12v controller, I've connected the controller to the where the lightbulb is powered and fed the infrared sensor into the light housing so I can adjust the lighting using a remote. I'd recommend avoiding the coated strip lights as they weigh more and the adhesive isn't that great on the roof lining. I replaced my original coated strip strip light with a bare strip light after it started to sag. The bare strip light is holding allot better. Also you can remove the entire light fixture to bring it inside to solder, also if you need to solder any connections onto the strip light do it before you fit it, soldering upside down is difficult.
@jamieaygo
2 ай бұрын
Awesome. Thanks for the tips!
@dino9071
2 ай бұрын
I accidentally completely removed all vehicle noise by fibreglassing the undercarriage and chassis to prevent rust I have to park outside so I did this for just that purpose the cancelling all the noise was a bonus but the handling and steering also noticeable improved it was like driving a prairie wagon around corners before compared to now I can't really explain why that is except the little tack welds that hold it together are now not needed because it now has much stronger joinery and doesn't sway when going into corners.
@jamieaygo
2 ай бұрын
This is cool! Do you have any experience doing this kind of work or was it a bit of a DIY project you undertook?
@dino9071
2 ай бұрын
I had a little bit of experience after defining gravity working upside down underneath the car now I can do anything fibreglass 😀 I highly recommend it you will notice the sound drop off quarter way through all I hear is the keys jingle in the ignition if I stall I have to rely upon the gauge can't hear a thing from inside .
@jamieaygo
2 ай бұрын
Awesome. Will be looking this up. have you got any recommendations for guides or anything?
@dino9071
2 ай бұрын
Sure all the things you need are cheap or free the big one is timber slats I got mine from old bed dumped on rubbish the pine half inch thick four inch wide slats cut them the distance between ground and undercarriage make each one 1cm longer then the next and label them 1-2-3-4 this you need in reach when you're under the car you will only have one hand free to wedge the correct size slat under your " sticker" to make your sticker take a off cut from the timber put a sponge on it cut to same shape as timber wrap in plastic lunch wrap just dishwashing sponge flat rectangle type wrapped with the timber then just cut the fibreglass chopped mat into the desired shape ( can't exceed width or length of the sponge) place on-top of the plastic wrapped sponge I resin the plastic then lay the fibreglass down resin again on-top then you can push that up onto undercarriage excess resin will drip everywhere when you apply pressure with the wedges that's it your done your first patch wait till dry remove scaffold peel off the timber and sponge you should only have to sand around the edges where resin dripped and formed stalactites prepare area before just like painting or welding.
Пікірлер