All things that are easy enough to address but worth knowing before buying
@samuelbradburry574
2 күн бұрын
@@Yasinmoussaouitrue
@clubsport.m3
Ай бұрын
That looks like a fun track! Nice to see you had a good time 😊 I do have to say: please put fresh brake fluid before you go out on track. Thats a must for safety.
@mrgizmo7975
Ай бұрын
At the minimum you need brake pads and fluid upgraded, negative camber will also help not chew up the tires. You don't need coilovers, stainless steel lines, etc.
@Yasinmoussaoui
Ай бұрын
if the pads on the car have lots of material left, still totally fine to go out and do some driving. just need to be mindful
@mrgizmo7975
Ай бұрын
@Yasinmoussaoui depends on level of experience. Just to drive around a track in beginner group, maybe, but low dust low operating temperature brake pads and fluid can not handle track, especially on a heavier car like e92m.
@hyeoctane
Ай бұрын
Leaves a greasy like residue and drys in paint way to fast you have like two minutes maybe to get the water off or you have have hard to remove smudgy greasy streaks I have a navy blue Mercedes
@Yasinmoussaoui
Ай бұрын
are you using the spray or the compound?
@UrMumbruh
5 ай бұрын
The pizza with the work is so accurate
@Yasinmoussaoui
5 ай бұрын
Mandatory
@AhmadAbdelgader
5 ай бұрын
Everyone’s crying cuz they can’t have a 911, 😂
@Manu-Official
5 ай бұрын
What a downgrade.
@Yasinmoussaoui
5 ай бұрын
Def don’t recommend
@Biface
5 ай бұрын
i basically drive the same car lol i have a mk4 vr6 golf
@Yasinmoussaoui
5 ай бұрын
😂😂 sick car man
@Biface
5 ай бұрын
@@Yasinmoussaoui I have a Volkswagen Audi Porsche car so it’s basically a Carrera gt too ngl drives the same
@_Thomas_Clarke
5 ай бұрын
So take the airbag out for a slight aesthetic boost… got it.
@Yasinmoussaoui
5 ай бұрын
This guy gets it
@liamgordon8468
5 ай бұрын
why would you do that
@Yasinmoussaoui
5 ай бұрын
Because race car
@lukec1237
5 ай бұрын
Looks worse
@Yasinmoussaoui
5 ай бұрын
That was the goal
@CohnWolfeFitness
6 ай бұрын
Great review! I’m thinking of doing the same setup on my e46 zhp with the stock zhp wheels. I hate how tucked the wheels are 😂 Your stance looks awesome now 👏
@Yasinmoussaoui
6 ай бұрын
Thanks! Yeah I think the stock Zhp wheels are some of the nicest stock wheels ever made they just need a little help getting flush to the fenders. Highly recommend these spacers I’ve had 0 issues to this day
@CohnWolfeFitness
6 ай бұрын
@@Yasinmoussaouithat’s super helpful thanks. I wanted to purchase some spacers from FCP Euro but man it was almost $400 dollars with spacers and buying the bolts separately 😳
@peculiarpineapple9843
6 ай бұрын
I was like wait wtf that’s Yasin’s house😂
@ArianaGandhi1
9 ай бұрын
How are they holding up now? Any vibrations?
@Yasinmoussaoui
9 ай бұрын
No vibrations whatsoever. I even used these on the racetrack at 140mph+ speed with no issues
@mgyfujyf
10 ай бұрын
If I’m selling a muffler that has this done, what do I say exactly
@jaysonvanrooyen1999
Жыл бұрын
Decat as well?
@Yasinmoussaoui
Жыл бұрын
No Decat. Didn’t want to get a CEL and have to get a tune to code it out. Exhaust still sounds the same and seems to be holding up well several months later
@seanpaul3050
Жыл бұрын
This exhaust is stainless steel. If you weld it with steel, it will rust very quickly. Need to use stainless steel welding rods.
@jovaneghtesadi1494
Жыл бұрын
Pretty much followed your same steps for the mod. However over time the exhaust tape must not have held as it’s less loud. I wonder what a good alternative can help keep the mod more permanent…
@CustomcrowdMitroc
29 күн бұрын
weld the holes shut in the muffler thats what i did on my 135 when i did the pe exhaust mod instead of using tape
@moonlightuh3024
Жыл бұрын
we need a update video
@porchouaxiong7471
Жыл бұрын
what is your opinion on duraflex body kits for vehicles? people keep saying it's trash..
@Yasinmoussaoui
Жыл бұрын
I think if you are willing, able and planning to do body work it’s worth it. Otherwise OEM will save you a huge headache
@cooliecrewspeedshop
7 ай бұрын
I use them on my drift car bc theyre cheap and I dont feel bad smashing them up. Havent crackd any panels yet but the fitment is horrible. It depends on what youre doing with your build
@AhmadAbdelgader
Жыл бұрын
😂
@Yasinmoussaoui
Жыл бұрын
These fenders are gonna be a pain!
@AhmadAbdelgader
Жыл бұрын
@@Yasinmoussaoui gotta hunt down some metal ones
@Croco05
Жыл бұрын
Any drone?
@Yasinmoussaoui
Жыл бұрын
A very small amount at about 3k. I would recommend the 2.5 pipe mod instead of 4 pipe to eliminate that.
@giuliomalvestio889
11 ай бұрын
All exhaust line oem ? Or dekat / kat 200 ? Tks
@AhmadAbdelgader
Жыл бұрын
Amazon and eBay parts all the way 😂
@Yasinmoussaoui
Жыл бұрын
Always worth a try😂
@huynguyentran986
Жыл бұрын
Wow, I can't wait for more tutorials so I can do this to my civic!
Пікірлер