I'm about to do the same thing. However, my blazer is a 2005 - 2 door. The tank is located differently and even shaped differently. In a few days I'm going to a Wrecking Yard, where I can cut out the floor from another 2dr Blazer and locate the pump position. I might even buy the pump of the used one... We'll see... Anyway, Great little video. It's very helpful 🙂
@sebastienhache7493
3 ай бұрын
Cutting metal creating sparks over a gas tank doesn't seem right. Even if you don't see sparks metal gets hot enough to light gas vapors so just drilling a hole to start a cut with something like tin snips is risky but slightly safer I guess.
@DylanGlenn-cz5jz
7 ай бұрын
Do i have to take the seats out ?
@matthews8576
10 ай бұрын
I did the same with a Bravada. Good thing because Blazers etc. like to eat fuel pumps.
@kalikid333
10 ай бұрын
It worked for me
@RoyotePeyote
11 ай бұрын
Thanks, your hole location was spot on! I used a jigsaw to cut it out, no issue with sparks. Used tinnerman nuts to bolt the cutout back on...
@dellyddon1038
Жыл бұрын
Thank you for the video! I wish you'd had provided some measurements and didn't lurch around so much, but was able to mark a location and the fuel pump was exactly where you said it was!!
@nedaCFilms
Жыл бұрын
Use aviation snaps! Do not use a grinder.
@Ghostacc956
Жыл бұрын
Thanks I was thinking of using some sort of snips also, but how would I start my initial cut? Or make nice crisp lines.
@nedaCFilms
Жыл бұрын
@@Ghostacc956 drill a pilot hole with a universal / stepper bit, there’s about 3 or 4 inches from floorboard to top of gas tank, so you don’t need to worry about hitting the tank. Then some red or green “Midwest” brand aviation snips will cut right through floorboard with ease.
@robertholliday3442
Жыл бұрын
Takes a special kind of person to make sparks over a gas tank.
@drivechevys2673
Жыл бұрын
This is totally wrong and dangerous but hey to each their own
@jamesobrien853
Жыл бұрын
I was hoping that someone did video on doing this, thank you.
@e954rr2
2 жыл бұрын
Lazy people do this
@RadFingerz
2 жыл бұрын
Wow needed this
@joedq
2 жыл бұрын
Thank you for sharing this. I had to replace the fuel pump in my 2002 Camaro last year and found a trap door video for it, just picked up a 2000 ZR2 S 10 Blazer today, so whenever it goes out, I have your video to get me through it. Thanks again!
@mpirtam8180
3 жыл бұрын
I took my blazer 2003 to the mechanic to replace a fuel pump this job took 3 hours to do. The hardest part is taking it down. Putting it back in was easy. Nice video
@ginerbread84
3 жыл бұрын
i dropped my tank and did pump in 2 hours on the ground in the snow lol
@ALIENBACKGAMING
3 жыл бұрын
What all u had to take loose? I'm curious how did u know it was pump, my 2000 is giving me that dam p0446 code ,truck died on me while driving and wouldn't start back up
@ginerbread84
3 жыл бұрын
@@ALIENBACKGAMING pour fuel down the intake if it starts it's not getting fuel, or find port on fuel rail area purge it and cycle the key, purge it again if it didn't build pressure pumps not working, cycle key listen for the pump to turn on.
@ALIENBACKGAMING
3 жыл бұрын
Well I didn't do the gas pour yet but yesterday I cycled the key and heard the fuse,and pump engage with a light whining noise which sounded normal to me
@dcar7128
3 жыл бұрын
Tyvm appreciate it I did this to my 96 gmc jimmy 4x4. Made life whole much easier and while I did this changed fuel filter :)
@Thatuptownguy
3 жыл бұрын
Kyle, im going to be doing the same process next week on my 00 Blazer LT 4dr. My question, Is it possible after you get that pump out to stick a siphon down and suck all the old fuel/sediments out of the tank?
@dcar7128
3 жыл бұрын
Yes you can , once you get all gas out let dry as much as possible and you can use shop vacum to suck out any debris:) I did this to my 96 gmc jimmy 4x4
Пікірлер