Hi new subscriber. I am having same issue. I would love to see how it looks after.
@geraldseely2203
2 ай бұрын
What hack
@barryoconnell9795
3 ай бұрын
You did it the hard way but I admire tenacity and work ethic. God Bless You!
@JillofAllTrades2
5 ай бұрын
You did it! You were brave! Thanks 👍🏻 (Tin snips/metal shears is what you were looking for.)
@dougb8207
5 ай бұрын
That job looks like a real pain in the neck. Did you have to do anything with tape or whatever to seal the seams in the vent connections behind the wall? I like the idea of building out the wall with wood trim to support the box depth; nice touch. The finished product looks really good. If you don't know, thinly feather the mud into the painted surface or you'll see the transition even after painting. Kudos on tackling the project. The more you do, the more you will learn, and the better you will get at it. I'm in a similar situation, but my house is a fixer-upper, and if I really get stuck, then I call in the pros. P.S. Have you considered using a drywall saw to cut the drywall?
@auntshug4853
2 ай бұрын
I used t metal tape to seal seams
@francesmingo7623
6 ай бұрын
I was enjoying it until you started to cut the molding. From where I could see your fingers were too close to the sawblade. I started to scream move your hand move your hand ha ha. Nice work Aunt Shug. ❤😅
@rmalus10297
8 ай бұрын
Girl...I feel you. I can drywall, I can't mud. Whatever I attempt looks like a 3 year old did it
@LG-yy2up
8 ай бұрын
THAT LOOKS AWFUL, , YOU NOW COMPLETELY COLLAPSED DUCT TRAVELLING UP WALL TOWARDS ROOF VENT,, ENJOY THE MOLD IN YOUR ATTIC👏. CALL A PROFESSIONAL, DON'T BE CHEAP!!!
@AhmadBoxingRoyal
9 ай бұрын
You are so pretty what’s up
@thomasm2709
9 ай бұрын
10:17 great idea to frame out the box
@thomasm2709
9 ай бұрын
“It’s not rocket science”… proceeds to mangle every step of the process. Jkjk I really appreciate you posting because these are probably all mistakes I can and still will make
@jmcinnis621
10 ай бұрын
Well that's got to be the craziest drywall, in wall dryer ducts project I've ever seen. You had all the wrong tools except for the tin snips. But you still did a great job. Hats off to you girly for determination and finishing the job well.
@stonepointdrivingschool2044
10 ай бұрын
Very good - thank you, but they do make a good large tooth drywall saw - like a huge knife
@hh7258
10 ай бұрын
You didn’t do it right 🫤
@vidguy007
11 ай бұрын
She probably shouldn’t use a hammer working with dry wall, and used a stud finder to not have a stud in the way I’m guessing this is a joke because it’s so bad It was plainfull for us all
@bobbyschannel349
Жыл бұрын
Again, four years ago and you still haven't grown any of your channels maybe that's one of the reasons why you're trying to get on this anti-black.. connecting yourself with white nationalism on your other channel... Which isn't working by the way, because again, this is a small itty-bitty Channel. But I still have a problem with black conservative-leaning people running around in my community. That it bothers my soul... that's why I'm trolling. There's nothing that bothers me more than black conservatives who align themselves political party organizations or groups that have a very strong white male orientation and white nationalism.. I do not want you people anywhere near the race of Frederick Douglass.
@99sflores
Жыл бұрын
Actually, it looks custom with the small frame.
@kaboom362
Жыл бұрын
What a keeper 😊
@operadog2000
Жыл бұрын
👍 Thumbs up. Well done.
@larmar
Жыл бұрын
Oh my god take your rings off😮 they might get damaged!
@wayneguy6043
Жыл бұрын
Looks a mess
@user-js2bp2li2c
Жыл бұрын
Auntie Shug I love this. I knew I needed this solution specifically but I wasn’t sure what I was biting off without watching it happen. The good bad and ugly of it. Home improvement stresses my husband out so much because the tiniest bit of obstacle he shuts down so he’d rather not do them at all. Thanks for keeping it real! I know I can do this for myself now after watching you!
@marz500000
Жыл бұрын
Hello, Great Video!! This is what I need to do. I have the same situation like you. Old dryer went out and the new dryer stuck out more. Where did you get that in-wall vent?? Can you provide a link to the product? Great job and Thanks 🎉
@Calebt1981
Жыл бұрын
I can totally identify with your struggles in this video. Thank you for modeling perseverance and positivity!
@Tchairdjian
Жыл бұрын
You royally mangled this thing LOL.
@seansyaboy7344
Жыл бұрын
I install these quite often and I’ve found it’s easier to cut the pipe with a angle grinder with a cut off wheel. Also it’s best to have the box placed flush with the floor unless your dryer is on a pedestal. Nice video
@cusimilooking4965
Жыл бұрын
I did not know that there was a " paper" to cover the perimeter of the box ( instead of taking a spatula and filing in the cracks and holes with spakling paste).
@cusimilooking4965
Жыл бұрын
What a calming sweet voice.
@ydnas77
Жыл бұрын
Dude spends all that time showing the drywall removal & then skips the part where the actual installation occurs. What a waste
@DJV94022
Жыл бұрын
Props to you miss
@yevgenikovelman3306
Жыл бұрын
looking to do this together with recessed water, drain, and gas. Thank you
@kelvinmurphy9704
Жыл бұрын
You did an AWESOME JOB my sista 👍🏽👍🏽
@Mr67Stanger
Жыл бұрын
Well done. Now I know how to do it. I have a few good tools I can use for my specific situation but you showed me I can do this entire work in one weekend. Thank you!
@skybarwisdom
Жыл бұрын
You are better at floating and taping drywall then you give yourself credit for. Endeavor to Persevere.
@NewShockerGuy
Жыл бұрын
One thing that would have saved you a ton of time is to drill a small hole or use a stud finger to see exactly which side the vent tube was on for the 2x4. Then you would have turned over the recessed dryer vent assembly with the hole facing upwards, then reaching in the hole and tracing the inside outline of the wall mount pan (rather than the outside diameter)... then cut the wall. It would have been flush up against the dry wall and you wouldn't need any of those trim/filler pieces you cut. Not to mention a ton of time fixing the dry wall. We all start somewhere. At least you document it to help other people. Most women don't even attempt anything like this. Good stuff!
@Ar-ld5rn
Жыл бұрын
Damn, I got work for you. How much you charge 😊
@alexborisov7643
Жыл бұрын
Not helpful all, skipping steps, thank you for wasting my time. And how, HOW wore you “blessed” by doing this project?
@VTRex
Жыл бұрын
Your most popular video is this DIY video. You can't be perfect at something you've never done before. Ignore the haters. You have the two most important tools: vision for what you want and a willingness to try something you've never done! I loved watching this as did 37000 other people. Make more of these.
@auntshug4853
Жыл бұрын
Thanks for the encouraging words
@francesmingo7623
6 ай бұрын
Keep on making DIY the more you do it the better you get at it. When you learning something new perfection comes through trial and error. Haters stay away.
@bmfitzgerald3
Жыл бұрын
Aunt Shug! Great job. I think the haters out here are funny, because it's actually even more helpful to watch someone with enough courage to publish their struggles as you can look for things to avoid or possibly do differently in some ways. For example, seeing the box depth problem is making me be sure I select the right model for my situation so it is fully recessed. That's one of the beautiful things about KZitem, we can all learn from each other's mistakes, as well as our successes. I saw that you purchased a multitool after reading some of the comments here. You are probably aware, but the multitool would will not only help cutting the rigid metal (with a metal blade), but will also make cutting drywall a lot easier in the future. Nice work on the mudding, and nice solution on the wood trim! I want to congratulate you for knocking out the project and posting to help others. Hope to see more content from you in the future! Thank you for sharing.
@auntshug4853
Жыл бұрын
Thank you Brian…. This exactly why I posted the video to help others
@johnsteib5688
Жыл бұрын
don't do that anymore
@rrrr6863
Жыл бұрын
Terrible
@tonyamayo7616
Жыл бұрын
Thank you for your sharing this video with us. Did the recessed vent come with instructions as to the preparation for the installation? Thanks
@auntshug4853
Жыл бұрын
No which kinda sucks about the whole thing. 😅Thanks for watching
@dickrowland9528
Жыл бұрын
You should not be allowed to go near any project again.
@wolfthornhawkridge5705
Жыл бұрын
Nice job
@kw1nz33
Жыл бұрын
Great video, thank you! I’m gonna do this at my new house!
@johnv3412
2 жыл бұрын
I love this. I work in the trades and tenacity is a quality we all must possess before even starting a project. Great job!
@SheilaSpencer1
2 жыл бұрын
😳 Please tell me you didn't leave it like that (end picture). That looks like a hot mess right there. Definitely an "A" for effort, you never gave up, but you made it harder than it had to be. As for the final product, I hope you sanded out all that mud and painted the wood trim. 🤷♀
@johnv3412
2 жыл бұрын
Interesting comment coming from someone who's never posted a DIY video herself. She did the best with what she had, which is what we're all out here doing. Keep it classy, Karen.
@SheilaSpencer1
2 жыл бұрын
@@johnv3412 not every DIYer posts videos; shocking I know right. It seems every Tom, Dick and Harry is a vlogger these days. But just because I don't post videos, doesn't mean I don't know what I'm talking about. I'm pretty handy and do all my own repairs. That being said, I would expect someone who IS posting a DIY video would have the knowledge and skills they are trying to teach others. She did do a decent job; although it was painful watching her struggle with all the wrong tools. I just thought the rough looking end shot looked unfinished. Maybe she sanded it out and painted it up nicely after the video, idk. Didn't mean to upset her "fans". 😉
@VTRex
Жыл бұрын
What sense does that make? So the back of her dryer can enjoy the view?
@SheilaSpencer1
Жыл бұрын
@@VTRex absolutely 😂😉
@jag376
2 жыл бұрын
Great job!! You are a hard charger and obviously there is no quit in you. Thanks for the video and wish me luck in my installation of a recessed box. My best
Пікірлер