I just bought one of these last night for 900 runs good and everything just no brakes loose chain where is the choke at on them if they have one
@CD_Garage
Күн бұрын
@@upnorthvlogs The choke is a yellow lever on the fuel switch side of the carb. Up is choke
@angelvrgs9358
15 күн бұрын
Good job man 🫡
@sneepsnoop3149
20 күн бұрын
Hey man I’m 13 years old I have a dirtbike and my brother has a quad I am currently saving up I have $450 for a quad do you have a quad or something I can flip to resell and help me out to buy a quad? Thanks.
@Crazyduckhunter
22 күн бұрын
Let her eat man 😂
@seanzanni2437
Ай бұрын
I never understood how anything gets in that condition in the first place😂🤦♂️
@Farmboy-e4k
2 ай бұрын
Nice video bro
@jacksonstephens9772
2 ай бұрын
Hell yeah!
@levi-rg5ou
2 ай бұрын
u sound like panguin0
@pitbullgamer8116
2 ай бұрын
You put oil in cylinder thats why it was smoking
@CD_Garage
2 ай бұрын
@@pitbullgamer8116 Probably cause a little bit of it, but it still smokes a little on cold starts
@Hootman865
2 ай бұрын
Nicely done, let it warm up to dial in your idle on something that’s sat for so long. You have a career in front of you. Well done
@charlesroberts1705
2 ай бұрын
Had one great atv
@Pickup_Projects
2 ай бұрын
Nice video! It’s always satisfying when it’s just a carb clean. I’m subscribed👍🏼
@High.Gear.Garage
2 ай бұрын
Back again brother
@the_boy_gamin
2 ай бұрын
you know its a good day when you post
@Two_scamps
2 ай бұрын
I love the videos
@Thatguyonfourtrax
2 ай бұрын
Bro fire video I already watched the full video!!
@devinmosley4543
2 ай бұрын
why take off the custom back seat
@CD_Garage
2 ай бұрын
Aerodynamics
@logic7736
2 ай бұрын
W bro, doin all the right things to see its condition and get it runnin, ya got skill, use that and make this a living.
@DylanCooper-ov8xu
2 ай бұрын
W vid 🙏🔥
@hughwinellis
2 ай бұрын
Cool
@HipaParts
2 ай бұрын
Very informative ATV repair video and it's amazing to see how the ATV was brought back to life.
@coreygolfer919
2 ай бұрын
They make heat shrink tubes that have metal to splice wires instead of using solder
@CD_Garage
2 ай бұрын
@@coreygolfer919 I’ve used those before but the ones I used didn’t hold very well. They are more waterproof though
@Thatguyonfourtrax
2 ай бұрын
Dude please make more videos like this I love the videos I’m trynna get like you!
@james35546
2 ай бұрын
Excellent work
@the_boy_gamin
2 ай бұрын
love you content you sound like penguinz0
@TellemRosefixez
2 ай бұрын
Hey i just hope you respond to help me what do you recommend to record and edit on?
@CD_Garage
2 ай бұрын
@@TellemRosefixez This video was recorded on an IPhone and GoPro. The iPhone has better audio. I just use CapCut on a laptop to edit
@TellemRosefixez
2 ай бұрын
@@CD_Garage thank you love the content
@brodster_6997
2 ай бұрын
Those foot pegs and the guard put a quick coat on it and should be mint nice vid man
@mickweatherall2158
2 ай бұрын
Great video, Mustie1 would've made that into a 4 hour epic 😂
@suckmyramrod
2 ай бұрын
Definitely. 90% of his videos are all about carbs.
@rodriguezalbert55ar
2 ай бұрын
If you want to shine those plastics even more. 600 grit wet sand all the oxidation off and then take heat too it. The plastics will really shine up then.
@SuicidalRiot
2 ай бұрын
Did I magically see 420 on right front fender? phuckyeah
@TheATVHustle
2 ай бұрын
Those bear trackers are tanks as long as you got a good seat and rear end they will ride again.
@thequadfatheratv9177
2 ай бұрын
Get some SC1 spray or use some boiled linseed oil on a rag it will bring that shine out for sure. 🙂
@CD_Garage
2 ай бұрын
@@thequadfatheratv9177 Never heard of using linseed oil, I’ll have to try that. WD-40 is my go-to but it doesn’t last long
@justin_steen
2 ай бұрын
@@CD_Garagebtw WD-40 degraded the plastics over time
@xxparayeet_godxx
2 ай бұрын
You made it a beautiful wheeler again. Got me inspired lol.
@frankiewaltman
2 ай бұрын
Can you make more vids like this
@Hunter-ji4ot
2 ай бұрын
Love your videos
@CD_Garage
2 ай бұрын
@@Hunter-ji4ot This one might come across your marketplace too😂
@DylanCooper-ov8xu
2 ай бұрын
Just a little “CrUsTy”
@JMusic_23
2 ай бұрын
On the bars, I don’t know why they didn’t just put a bushing in there in the first place it probably wasn’t that expensive😂
@phoenixarizona8441
2 ай бұрын
These go karts make great side by side builds
@CourtJ_ml9to
2 ай бұрын
NO COMPRESSION TEST before YOU CHooSE to do PISTON???
@CD_Garage
2 ай бұрын
@@CourtJ_ml9to Better safe than sorry might as well replace while it’s apart. I did check ring gaps before buying the piston and they were way out of spec.
@CourtJ_ml9to
2 ай бұрын
@@CD_Garage what about the valve seals??
@CD_Garage
2 ай бұрын
@@CourtJ_ml9to Did the valve seals too, that was part of the work that I didn’t film
@Hunter-ji4ot
2 ай бұрын
As soon as I finish, the video went straight to Facebook marketplace, and found it
@xxparayeet_godxx
2 ай бұрын
Gonna be restoring a Suzuki ozark 250 on my own here soon. This vid showed me a couple things that’ll help
@DylanCooper-ov8xu
3 ай бұрын
Awesome video
@ksboi29
3 ай бұрын
That bike is premium. Duct tape adds about $3000 😂
@johnhicks735
3 ай бұрын
That's your exhaust packing loaded with carbon and unburnt oil And gas residue buildup inside of the silencer and screen. Cause you might come to find out after doing all of that work on it that it's still making that bogging sound. Due the silencer isn't allowing the proper flow through it.
@RC-fu6hg
3 ай бұрын
Or valve seals
@ChrisEsposito
3 ай бұрын
i am going thru the same shit with my 400ex i just picked up from a kid...
@juanignaciorodriguez4348
3 ай бұрын
Wow. Is for sale?
@CD_Garage
3 ай бұрын
Yes
@juanignaciorodriguez4348
3 ай бұрын
@@CD_Garage location?
@CD_Garage
3 ай бұрын
@@juanignaciorodriguez4348 Not going to disclose that on here sorry
@juanignaciorodriguez4348
3 ай бұрын
@@CD_Garage understandable. How do I contact you?
@juanignaciorodriguez4348
3 ай бұрын
@@CD_Garage hey. Sorry to bother again. How do I get in contact with you? I do not see contact info in your profile.
Пікірлер