Those crimpers aren't avaliable anymore. What to use for the 10 gauge wire? Other ones don't seem to go that big, unless I'm not understanding them correctly
@Ridgebackjp
3 сағат бұрын
Hey friend, just updated this to include links to items. Hope I helped and your project is going along smooth!
@khancross
6 ай бұрын
Is there need for relays if you have one big cable going from the battery to the fuse box and from the fuse box to all devices like radiator fan, fuel pump, powerwindows etc. Before the fusebox you add a battery killswitch, evertime you stop driving, use the killswitch to disactivate the fuse box. Am I right with my thoughts?
@callofgeorge
9 ай бұрын
awesome video. not doing a racecar this time. purchased a 66 bronco that needs new wiring badly.. after pricing aftermarket harnesses at $800-$1000, i decided I'd just wire it myself with some GXL since i did a HWY22 install from AAW on my 68 mustang. its pretty much just a universal fuse block. I'll be going with the Eaton 15305-1-2-3 20 circuit panel.
@kulaniscap
11 ай бұрын
looks so neat, well-done.
@GarageAbstract
11 ай бұрын
Waiting for Hubeny to make his return
@mrlolamason
Жыл бұрын
great video!
@JoshMustillo
Жыл бұрын
Loved it, thank you!
@MyCrazyGarage
Жыл бұрын
I bought some of those fuse and relay boxes a few years ago. A few grand in total including contacts. Only to realise that the relays are non standart. And the only company that sells them in under 1000 pieces is in switzerland and only accepts card payment...which almost nobody uses in europe
@darbymcbride41
Жыл бұрын
Thanks plan to make a few boxes for standalone race type obd1 and k swap barebones engine management power distribution. This video and how you phase the process really makes I easy for the viewer to pause, perform length process, the continue without being bombarded with too much wealthiest of knowledge. Ie overseas. The directiveness and specificity about the crimp tool selection and advice for performing these functions properly enables guys to save and feel accomplished about their builds. You did a good thing. Cheers brother. I'll subscribe now. RESPECT
@darbymcbride41
Жыл бұрын
Autocorrect sorry... overseas=overshare
@fomocoloco7172
Жыл бұрын
This is an amazing video. It's actually the first video that I've seen that uses current automotive style boxes that are super water proof and look clean.
@Ridgebackjp
Жыл бұрын
Thanks brother, appreciate it
@4G63Tpower
Жыл бұрын
For some reason my crimped pins pull out from the buss man what am I doing wrong?
@thewandercruiser
Жыл бұрын
I'm just now getting around to doing this and realized you've referenced the wrong terminals for the 10awg jumpers. The correct part number is 12110853 for the tangless terminals you show in the video.
@pmxgamingftw8286
Жыл бұрын
You got an IG or something? I wish I could continue following your build I'm working on my own 180sx with an rb20 and man these vids are huge and more would have been wicked. But I understand life can get in the way of things
@amithnissanka5582
2 жыл бұрын
How to buy this relay box
@thewandercruiser
2 жыл бұрын
This has got to be the best video I've seen on this topic! Super informative, very clear, and no other fluff. Thank you so much for putting this together!
@adelaideinvigilation5230
2 жыл бұрын
The plugs that you created all had a single wire going to them, so why not use a single wire connector to save space?
@7eis
2 жыл бұрын
Remember kids, dimpe goes in the back
@itolond
2 жыл бұрын
I have the Bussman relay box 15303-5 - a number of switches send a ground signal to activate the relay (vs a + trigger) - is there a way to trigger the a / or some relays (pin 86) on the 15303-5 using a ground signal ?
@911engineguy
2 жыл бұрын
Does mounting these relays upside down actually change anything? Aren't the connections through the relay, still through the diagonals, so if you mount upside down, they work the same?
@Gunnl
2 жыл бұрын
"we'll get back when that dries out" ... famous last words...
@Ridgebackjp
2 жыл бұрын
Hahahaha
@Gunnl
2 жыл бұрын
@@Ridgebackjp post some more dude...its quality stuff ;)
@KemDIY
2 жыл бұрын
Stupid question as I’m just learning. The wires you plugged in; are those the inputs from switches etc or are those outputting to the actual powered device?
@lathropedition
2 жыл бұрын
This was exactly what I needed! Thank you! Awesome job!
@jayrob3
2 жыл бұрын
Hey, some of us wanna know whats been happening. Or happened. Hope all is well. Stay blessed!
@tevaughnalleyne
2 жыл бұрын
Resonance ❤️❤️❤️❤️
@m.k.7199
2 жыл бұрын
Excellent description, but drop the music. I want to hear the details, not be entertained.
@aadams3316
2 жыл бұрын
I really appreciate your video. The fuse panel solutions always seemed a little bulky and you outlined (especially integrating that PDM) exactly what I wanted to do with my restoration.
@TheAmazingKraken
2 жыл бұрын
Dude. Amazing video, thank you very much 🙏
@t0m33r5
2 жыл бұрын
where is the parts list?
@kyriakosmaridakis8139
2 жыл бұрын
How Can i make a fuse box where I can connect an amplifier that turns on when the key is turned ?
@freyguyproductions
2 жыл бұрын
Great video, do you have links for any of the other products you use in the build?
@thefitprk3
2 жыл бұрын
Any clue where you can get these panels anymore? Can’t find any with the 2 buss bars in them.
@xsublimefrekx
2 жыл бұрын
Working on doing my s14 fuse box relocation. Any tips?
@Ridgebackjp
2 жыл бұрын
take a lot of pictures of how things were, before you unplug, depin, and cut things
@theunfairadvantages
2 жыл бұрын
i set this up and had some issues with getting it to work, any suggestion on trouble shooting?
@dylancochran7830
2 жыл бұрын
Great video super helpful, What wire loom did you use? I don’t see it listed in the description.
@markstephenson4823
2 жыл бұрын
Very helpful great tutorial!
@mitchellwood1833
2 жыл бұрын
Can that be wired for a negative ECU switch thanks
@yetanotherproductionco.787
3 жыл бұрын
great video! subbed and huge thumbs up!
@NicolasMourra
3 жыл бұрын
How exactly would you set this up to work with gauge wiring? Electrical noob here.
@park0rdie
3 жыл бұрын
Love it!! Clean setup. 👍
@jamesmorales8025
3 жыл бұрын
Speak up loader
@madoumadou9549
3 жыл бұрын
This is very good work think you
@iansowards281
3 жыл бұрын
Awesome video, 🔥 playlist.
@juiced71
3 жыл бұрын
Nice!!!
@frankense7en302
3 жыл бұрын
What if your using this to make a complete chassis setup, but using the 10 relay 40 fuse option, can you get solutions for timer relays, and relevant flashers etc. thanks
@Ridgebackjp
3 жыл бұрын
not really, I've done some research to try to do this, some relays are pretty unique, and you would have to use a couple of the stock ones.
@vocks85
3 жыл бұрын
Hope to see more videos from you!
@Ridgebackjp
3 жыл бұрын
Might have something coming soon. Summer break for me starts in a week so hopefully can do something with the car.
@vocks85
3 жыл бұрын
@@Ridgebackjp have you made any progress off camera? I’ve been watching SO many videos on battery/fuse box relocation. I’m getting stationed in Japan for 3 years and want to do it to my Supra. I like it because it’s a job that doesn’t cost much money, just time.
@andufuse640
3 жыл бұрын
good lesson. i make car fuse and fuse tap .
@michaelfisher556
3 жыл бұрын
Would you be interested in making one for other people.
@jalawialotaibi6639
3 жыл бұрын
I was planning to do the exact same job on my overlanding rig I guess I’m so luck I found you - thank you so much that was so much helpful! keep it coming please ❤️
@JubeeHS13
3 жыл бұрын
so on that bussman fuse box if you want to run two fuses would you run a 10 gauge jumper and splice them to 87 pin on the relay?
@365rallydailyracing
3 жыл бұрын
your editing skills are great! please make more content.
Пікірлер