Hey do you have a lot of gear roll over sound when you are in gear and decelerate?
@YungJoga
2 жыл бұрын
Hey mate, in the process of building almost the exact same car. I got a 1jz vvti w/ CD009. But I got a R320 diff from a 370z (lsd + better ratios w/CD trans), plus I got the serial 9 adapter instead of the collins. Did you ever figure out how to get how to fix the trans vibration/noise? Thinking of getting a two piece drive shaft to see if the fixes it. Also mad jealous your dash ain’t cracked
@sethypoo4749
2 жыл бұрын
What shifter are you using?
@sethypoo4749
2 жыл бұрын
@@kebthediabetic did you have to cut the shifter location to make it fit? Or does it fit in the factory spot?
@kevinsxntamaria
2 жыл бұрын
I loved it at 5:50, 8:40, and 10:05 I hope to build a 1JZ swapped S13 Silvia one day. God first🤞🏽
@travelingwiththefish955
2 жыл бұрын
If h don’t mind me asking how much was the build, when u where letting of the gas was it back firing cause I felt like I heard some pops and how much hp
@yar0nix224
2 жыл бұрын
3:25 ugh people move out of the way in my 240 like this for me but not in my daily like ever. i miss driving that car so bad
@ziptiegarage3075
3 жыл бұрын
What rpm are you at at 60mph with a cd009 and 4.08? Im doing a cd009 into my aristo and wanna try and figure out how bad the tall gearing is haha
@kebthediabetic
3 жыл бұрын
Unfortunately, the tach hasn't worked since this swap and I've been too lazy to look into it, so I'm not sure. If I had to guess I'd say around 3000-3200 or so at 60mph, she screams on the highway lol.
@csiverand
3 жыл бұрын
Is your shifter in the stock location?
@kebthediabetic
3 жыл бұрын
You'll have to use a different shifter bracket than the stock 350z one, but yeah I'm using the Serialnine cd999 shifter and it allows everything to fit in the stock location. Underneath, you will still need to cut some of the metal surrounding the shifter, but your plastics and shifter boot will fit over just fine and looking at it you'd never know.
@csiverand
3 жыл бұрын
@@kebthediabetic do you have an Instagram you mind if I ask a couple of more questions.
@kebthediabetic
3 жыл бұрын
@@csiverand I do indeed, @two_foty on IG as well. Feel free to shoot me a message anytime.
@landuXD
3 жыл бұрын
cool!
@averykealoha8086
3 жыл бұрын
That 6th gear is amazing on the freeway lol
@kebthediabetic
3 жыл бұрын
@@HNatureTV the car currently has a stock 4.08 ratio. I would very highly recommend the z33 diff, that will honestly be your best ratio with the very short gearing of the cd009. Try to find a 3.3 if you can, it seems like it may be too tall but it's honestly perfect for the engine and trans. Note that if you have an s13 like I do you will need an s14 subframe. The z33 diff will bolt into an s14 with just some custom diff mounts that are made by a company whose name I cannot recall at the moment- you can find them easily through Google. Also i wouldn't be too concerned about axle strength with that setup. If I recall it's stronger than the 240sx axles because of the way they mount to the diff. This is what I have heard, I was going to research into it further but when I found out the entire suffrage would need to be replaced for one from an s14 I decided I would rather take the easier route and do a q45 diff instead.
@supremebuffalo6322
4 жыл бұрын
I've been doing this too, on mayhem 4. My thunderball fists dropped with the "250% dmg increase after action skill" too lol it shreds most stuff
Пікірлер