Ironically, he does not show how to remove the downpipe.
@lethebuster
3 ай бұрын
How did you get the downpipe off? I have found no videos to explain it will. I've tried turning the bolt but it doesn't seem to come off.
@TheChangecraft
3 ай бұрын
What part of the downpipe?
@lethebuster
3 ай бұрын
@@TheChangecraft i ended up getting the down pipe off by removing the two way bolts on the turbo. Now I'm stuck on the oil drain line, supply like and coolant line for the turbo. It seems like a swivel wrench will do the trick with an extension based on the gulia forums.
@zeppkfw
4 ай бұрын
how long did it take you to remove overall?
@TheChangecraft
3 ай бұрын
Ca 3 hours
@lethebuster
3 ай бұрын
I just did mine. It took just about 8 hours for the uninstall alone. That's because I'm, inexperienced though. With the expereince - probably 4 ish. I took practically the same steps. The main reason in dragged out are a few bolts. The oil drain line bolt that's mounted to the bottom of the turbo was tough to reach. I needed an extension, a magnetic head, and a swivel socket. You then have to position the extension under the turbo and guide the bit to the bolt. The bolts that mount the downpipe bracket was also a hassle. There's about 5 degrees of room under there and it took all my shoulder muscle to get that bolt off. Other than that all you really need to reach any other bolt is an extionsion, and the right sockets. Don't try to remove the ac line from the firewall lol. The downpipe wasn't coming out for me and instead of rewatching the video I tried that and the bolt for the ac line broke. So I need to find a repolacement mount or get one machined and I have no clue where to start. I'm out here watching youtube for a turbo replacement for gods sake lol.
@zeppkfw
3 ай бұрын
@@lethebuster Ahh that sucks. Can feel the frustration thru the screen already lol. Thanks for the writeup tho youre a real one
@maciekfiedoryszyn4749
4 ай бұрын
what’s the brand of downpipe
@nikolaysgivanov416
5 ай бұрын
I'm sorry but I don't understand Dutch and I write in English, I couldn't figure out did you remove the catalyst or leave it?
@UTPGIO
5 ай бұрын
anyone know the english version or english video on how to do this
@gvngarage3.536
7 ай бұрын
Egr off con placca metallica
@Jeff-gc2sb
8 ай бұрын
You wouldn't happen to know the width of the turbo inlet side, would you? Im looking at the t51r mod, and im hoping it is 4 inches or wider.
@legenda9423
8 ай бұрын
Norske på youtube med giulia😱 Er veldig gira på Giulia 2.0T. usikker om det blir veloce eller q2. Hadde vært moro med Q4 med LSD og race mode då, men spørs om det er verdt prisforskjellen?! Holder til på vestlandet:)
@TP-tm4wj
11 ай бұрын
Sorry but sound check??
@delta3711
11 ай бұрын
Hi, I have a Stelvio, 280 hp I am interested in the spring on the wastegate turbine, whether it tightens or opens the valve, because it is loose due to temperature. thank you
@Henriksson22
Жыл бұрын
Blev du nöjd med downpipen? gött ljud? någon märkbar skillnad på effekt? :)
@Northbreeze
Жыл бұрын
Hey Benjamin, thanks for sharing these vids! I've seen you install the downpipe in one of your previous videos. I'm just curious (thinking about some future upgrades for my 2019 Giulia this upcoming summer). Are you replacing turbo with a new OEM part, or are you upgrading with an aftermarket part? If you're upgrading - can you share what turbo are you planning on installing? Cheers o/
@benjaminaamodt439
Жыл бұрын
Thanks! There is a video coming on what hybrid turbo setup i'l be running :) In probaly 2-3 weeks :)
@PETSH0PB0YS1
Жыл бұрын
Great video matey ! Thankyou very much..........
@JonHedding
Жыл бұрын
How did you get the return line off. I cant fit nothing to get the bolt off
@johndoe-mm6xu
Жыл бұрын
I'm in similar place trying to remove the lower drain line to replace leaky O ring without full disassemble like this. I managed to get the bolt out by going from front of car have to be careful not to rest your elbow on the coolant reservoir line. Using T30 3/8" with swivel to loosen it but not quite enough room to actually turn the ratchet then dropped down to 1/4" T27 to remove it praying it doesn't fall lol. Getting the actual line off is my issue seems the leak has glued them together but no room to maneuver it loose.
@benjaminaamodt439
Жыл бұрын
I used a t30 and a shit ton of extenders and swivel joints 😅
@lethebuster
3 ай бұрын
@@johndoe-mm6xudid you ever get it off? I'm installing a hybrid turbo and I'm stuck on the inverted oil return line bolt. Can you share a quick video of the type of extension or the direction you came from? I'm so close 😢😢😢😢
@lethebuster
3 ай бұрын
@@benjaminaamodt439is there a chance you can share a video example of this? I can't get it off. I'm trying to put on my hybrid turbo
@mrr2880
Жыл бұрын
Thanks a lot, although I can't understand what you're saying this video has helped me so much... cheers
@benjaminaamodt439
Жыл бұрын
Great! means alot!
@amd4710
8 ай бұрын
@@benjaminaamodt439 Maybe you could add subtitles so that KZitem can translate them? Thanks a lot for the video!
@parsiukurojus7961
Жыл бұрын
Hi. Maybe you still have your catalytic converter somewhere?
@benjaminaamodt439
Жыл бұрын
I still have it yes
@parsiukurojus7961
Жыл бұрын
@@benjaminaamodt439 could you measure the EGR connection inside and outside diameter on the catalytic converter?
@josteengonzales4197
Жыл бұрын
Did you get a check engine light?
@benjaminaamodt439
Жыл бұрын
Nope. Cat faker in this one
@erlingaarb4560
Жыл бұрын
Når kommer det flere videoer?????
@CarsTechstuff
Жыл бұрын
I love the Alfa Romeo Giulia. I hope someday I’d own one. 😊
Пікірлер