The instructions say you are supposed to tin the nozzle before first use to prevent oxidation.
@jasonmeister6988
5 ай бұрын
thank you
@JeffersonSoaresSP
6 ай бұрын
Hello. How do I access the service menu on this monitor?
@mdrakibhasan7306
6 ай бұрын
আসসালামু আলাইকুম আমার মনিটরে একটা সমস্যা হচ্ছে বাটনে চাপ দিলে যেই ফাংশন গুলা আসত ঐ গুলা নিজে নিজে আসে যায় এখন কী করতে পারি?
@shastrichandoo817
6 ай бұрын
The same model I recently bought came with a stand and sponge. It worked really well when I used it. I was able to remove a wide range of components with no difficulty at all...wonderful product
@jmoonshine4223
Ай бұрын
What about lead free?
@FAsTecIT
7 ай бұрын
Hello, I have the 5V which shows 4,7V . Is it possible to adjust that? Or, can you kindly suggest what to check in this case? Thank you
@Furkan_kara
8 ай бұрын
Hellp. Diffrenet topoc but how can i connect this monitor to laptop? (My laptop has only hdmi input)
@taiphan7225
11 ай бұрын
hi, could you please tell me which backlight is used (CCFL or LED)? Tks
@user-blabla-47854
10 ай бұрын
It has CCFL
@chukwuemekaakuegwu2594
Жыл бұрын
Can i Use it for ps5
@Electrotat
9 ай бұрын
LOL
@jayaprakashreddy.g.k9799
Жыл бұрын
Sir can i get one at Bangalore
@kumarprashant2903
Жыл бұрын
Kya is me cpu hota h sir
@sebidsouza4029
Жыл бұрын
Please share the link to buy
@giovannigiorgio2262
Жыл бұрын
aliexpress
@exscape
Жыл бұрын
Is that button latching? It doesn't seem to be, so you need to hold it in for the PSU to actually power up and stay on. Clicking it quickly like that will just power it up for a split second. I usually wire the PS_ON pin to ground with a bent paper clip when testing.
@RothElectronics
Жыл бұрын
It's correctly.That switch in this video is press on and press again is off.12V rail and 5V rail is normally but 3.3 rail is abnormal.I replace VRM ic and after that work fine.Thank.
@OldRoderickYoung
Жыл бұрын
Thank you! This was extremely useful, showing how to pull off the bezel. Since my fingers are not so strong, I found that as long as I could lift the bezel a little bit with my fingernails, I could slip a flat blade screwdriver in there to pry. I avoided prying against the glass, of course.
@RothElectronics
Жыл бұрын
Please be careful your finger.Of course it dificulty to pull off.Thank.
Пікірлер