thank you all my problems solved, the air intake boot have a crack just like your, fix that and now everything is good
@pierrelalonde5490
3 ай бұрын
Thanks for this mecanic crash course. Very appreciated. Having a problem with my 85' engine that stall on cold start or as soon as the rmp goes under 925 (like when I turn my steering ou goes from reverse to drive, all this within 1 minute after cold start). I'll do the drill and check all you mentioned. I'll keep you posted.
@jmjaxson
5 ай бұрын
Will a faulty switch prevent the 'square illuminated indicator' that surrounds PRN32L from indicating the 'P'.......?? Sometimes it indicates 'P' and the van will crank and start and if not, it will not crank at all. I have a 2007 Grand Caravan 3.8 litre vehicle. I'm also wondering if it's a possible faulty brake switch???? Of course it could also be a multitude of other things.
@jocelynsechler5192
5 ай бұрын
you said you werent going to explain in great detail...you explained every little thing...i appreciate you!
@mychicksrthick
6 ай бұрын
I have a unauthorized key because the originals were kept by the junkyard. How do I get these keys authorized?
@jimwilliamson7598
7 ай бұрын
Thanks for the info. That’s what happened to us, alarm would not stop.
@jefflaird7770
7 ай бұрын
I actually just removed the black cover on top, and was able to slip my hand straight down to the bulb. Had to fiddle with it a bit but it worked. Its tight in there.
@wingnutnation9960
7 ай бұрын
Thanks for the great video, I don’t think I would have been able to do it with out your video. Excellent
@justinbecker3340
8 ай бұрын
Definitely a company called All Computer Resources in Homestead Florida
@mattmiles1065
10 ай бұрын
I spent so long thinking that the upper was high and the lower was low beam. I am not a good mechanic
@TerryVaught
10 ай бұрын
I do occasional small jobs like changing oil and battery and simple stuff and decided to see if I could change a problematic ignition switch which brought me here. When I got to the part of the video where you warn about setting off the air bag I decided I would let the mechanic deal with it, so nice vid.
@johnplesha5267
10 ай бұрын
woke up this morning to find my 06 town and country radio on and AC blowing on low, turned key to start several times cranked but no start then I disconnected battery cable for a minute and it started up and ran but noticed little red dot on far right of dashboard gauge panel and after running it a bit to charge the battery back up and it kept running in all positions??!! tried to shut down by pulling battery cable off again but it kept running off alternator and I couldn't get key to shut it off until I messed with the ignition switch housing through the gearshift lever opening. When it was running it seemed to bog down when I hit the gas but had a PO420 catalyst problem code the day before via OBD2 reader I thought was from putting $30 of Thornton's E-15 gas when I was on a half tank and thought it'd clear up when I went through that gas. I'm assuming someone tried to steal it but IDK what to think.Any thoughts that could help greatly appreciated.
@DiZzyTrouser
11 ай бұрын
Thank you
@justinbecker3340
11 ай бұрын
After a LOT of troubleshooting, I replaced the ignition switch. After a previous no crank, no start condition, I was able to start the vehicle. It ran 2-3 seconds and I am now back in a no crank, no start situation. Ideas?
@MrAustin602
Жыл бұрын
Great Great video. My 86 is just can be abrupt as to on and off throttle. She is harsh , its on or off, not soft in between. this is when on highway or around town. I checked a lot but no solution. otherwise she runs great. Thank you very much even if you do not respond.
@nonagreeable
Жыл бұрын
What changed from 2009 and up? I thought they were the same still
@emmettturner9452
Жыл бұрын
I hear that sound but it seems to be my fuel pump. Been hearing it ever since the shop installed a new on last year. I thought it was the torque converter for several months. Was hard to tell it was the fuel pump since you usually have a bunch of other chimes when it primes so I only heard it with the engine running. Now I realize that I hear it for a second when I first turn the key (priming) and for a couple seconds after the engine stops. Sometimes it’s too loud for a drive thru!
@emmettturner9452
Жыл бұрын
Mine’s a 2000 Montana (previous gen)… same as the second-gen Trans Sport.
@juliannarosario9853
Жыл бұрын
I know this video is old but it helped me so much. Thanks for making this
@raymondfoster219
Жыл бұрын
thanks mate, definitely solved a few of my problems. given me ideas too i have an 85 with a carby brought out in the 90s to australia from the uk twin sliding doors is why its mine. the idea of doing an r+r on the carby is doing me in, first ill recheck all possible air leaks and do your gas check to see if anything is leaking. ill go to you first you seem know what your up to. thanks again stay well mate and catch you later
@efrostrup
Жыл бұрын
Thanks much; answered the question exactly!
@giuseppeveneziano2488
Жыл бұрын
grande ...
@erickrisler3555
Жыл бұрын
Awesome. Thanks bro
@sfranklin9073
Жыл бұрын
Yeah while drive all over hell and back for a frickin tamper proof screw driver. Bunch of dodge crap.
@dadpoolv5158
Жыл бұрын
Just used my sons small hands No tools required lol
@roberthood6036
Жыл бұрын
Yes sir I have a question for you I've got a 2003 Chrysler Town and country would that ignition switch module right there be the cause I have all my auxiliary power when I turn the key right before start my radio my heater wipers windows all that works fine until the moment I crank the vehicle and let off the switch when I let off the switch none of that stuff works from then on until I cut the vehicle off and kills the power and it goes back to auxiliary mode would that be the cause of this
@leminem88
2 жыл бұрын
could you do a video like this going over a 1982 vanagon? so helpful thanks
@briandavis1042
2 жыл бұрын
Did it fixit
@hobbit321a
2 жыл бұрын
Thanks dude
@paulblack1763
2 жыл бұрын
What can you do when you have lost the key to the vehicle
@wolfiestechbites3773
2 жыл бұрын
That depends. If it is the only copy you have, contact the dealer. They can manufacture a new key from the Vin code and proof of ownership (this may be a waste of money as the tumblers may have worn out, but it usually works but will need coding). Test the key to make sure it turns the lock and lights the dash lights, you can take the key back inside the dealership and ask them to code the key to work with the PCM (fancy name for the computer than controls the engine and the transmission.) After coding it will start. Most of the time they will just quote a price that may include a brand new ignition lock cylinder and that can get pricey. Hence why I suggest you approach them with the hope that the tumbler pins aren’t too worn out and then go from there. Alternatively, you can approach the dealer to get a key code from the Van’s vin code (with proof of ownership or them just knowing you and bring the customers/ or your own papers in) so that you can get a locksmith to make a plain steel key without a chip, just to test the lock. If it works on the door and the ignition, you can take it to the dealer and have them program an new chipped key to the van and then they can cut it to match the steel key or you can take it to the locksmith to cut to the steel key patter or even the code you got previously. Make a few calls and discuss options
@wolfiestechbites3773
2 жыл бұрын
Also, you can buy an aftermarket lock cylinder and change it out as they come with a new chipped key I believe (call your parts store and have them look in the box for a plastic head coved ignition key. They sometimes come with two)
@nathanielsmith4041
2 жыл бұрын
you just called your viewers inept, I like friendlier video mechanics, by the way you talk i can tell the military made you an asshole. Nazis infiltrating the military, is real, or it will turn you into a nazi when a black man man handles you in combatices, either way evil never understands that it is evil. whats the difference between a russian soldier and an american soldier? nothing, your all the same.
@rustyzipperband
2 жыл бұрын
Hey, I’m having a hard time setting the carrier. I’m being ginger carfuling, w/2 condoms but when I get the carrier set where I want it, when I torque it down it tightens up cock stiff. Is that normal? I’ve been trying to get this truck going sense Christ was a cowboy. Any advice man? Love your channels and I’m not even gay! Lol
@rustyzipperband
2 жыл бұрын
Btw I got the preload with a Mac 1/2” drive. Beauty eh!
@wolfiestechbites3773
2 жыл бұрын
Sounds like you have the pinion shaft too close to the crown gear. Or maybe you didn’t crush the sleeve on the pinion shaft properly?
@rustyzipperband
2 жыл бұрын
Thanks for the video! Maybe you can help me with a question I have my crush sleeve I took off looks a lot different than the one that’s in the kit. The one in the kit has a concave pump the one I took off as a convex bump in the middle. Do you think that’ll be a problem? Thank you!
@rustyzipperband
2 жыл бұрын
I’m rebuilding my deceased brother’s truck kind of sentimental. Make my mind roll because of the date you posted the video.
@rustyzipperband
2 жыл бұрын
Hate to bother you again but I got the tires back on and there’s a slight bit of slop sound. You can’t see the tire move but you can hear a little clunk when pushing the top of the tire. I haven’t added fluid yet but while tightening the lugs I noticed the noise. Like I said you can’t really see any movement. I might be paranoid because I’ve already had this thing apart and within a couple months the Oreilly Masterpoo bearings💩 shat out on me and here I am. Don’t buy shit Chinesium bearings.
@rustyzipperband
2 жыл бұрын
@@wolfiestechbites3773 thanks a lot man! I am meticulous to the point that it bites me in the ass every day. Doesn’t mean I do it right but I try. My life has been like a chess match lately. If you can put that into perspective. Just discovered by accident that the noise (that it’s still making {fuck!!}) is coming from the front or maybe the transfer case (fuck fuck!!!) so maybe I’m gonna drive it off a cliff like Thelma and Louise! FECK!!! Thanks for your advice I really really appreciate it!!
@candyrollin2438
2 жыл бұрын
My key is broken off in inside I don't have the chip my girlfriend's in jail she's got it can I take the key chip completely out of my car and start it with the broken key in
@CCROSS5882
2 жыл бұрын
Why don't they make an adjustable pinion race instead of using shims same way they do the side bearings Seem backwards to have to take it all apart to ad shims if its off dimension.
@1954rushing
2 жыл бұрын
Great video and very well explained. I just pull my axle's to replace the seals and new u joints. I noticed that my pinion shaft has about a 1/4" free play back and forth is that normal? Thanks in advance for your advice!
@wolfiestechbites3773
2 жыл бұрын
1/4” travel Is NOT good. It’s supposed to be very snug. If you watch towards the end of the video, I cover the pinion assembly
@1954rushing
2 жыл бұрын
@@wolfiestechbites3773 Thanks for the advice.
@Mohamedseddek
2 жыл бұрын
👍♥️♥️
@IAm1InTheIAm
2 жыл бұрын
Super helpful, thanks from your neighbor on the other side of the Yukon!
@macmotel
2 жыл бұрын
Hey. Im having bucking and jerking when feathering the throttle. ive had a rough idle and then a slight raise in RPM when the engine is at temp. any clues would be welcome. 2.1 syncro 1990
@MrAustin602
Жыл бұрын
I second this, what was the solution? thanks
@barend9364
2 жыл бұрын
Not a good video. Spent lots if time explaining and talki g about simlle things like putting bearing in or taking em out, and next to nothing on the important stuff like shimming and leaves most of it out. Dissapointing
@jeffsmith1830
2 жыл бұрын
I have 09 2500 dodge. Want to put in a truetrac in the front. I've read i need to use ring/pinion gears for a 03-06. Anyone know why? Awesome video. Sure I'll watch it a few times.
@jeffsmith1830
2 жыл бұрын
Truetrac
@a.lguerra7554
2 жыл бұрын
I have a 1999 dakota, I would like to install an LSD kit like this one but I can't find it here in Brazil.
@wolfiestechbites3773
2 жыл бұрын
If you need a link, let me know
@unknownbrid221
2 жыл бұрын
Amazing video/how to! I have been watching this on multiple occasions in preparation for some upcoming rear end work and I learn something new each time!
@hakt100
2 жыл бұрын
I have experienced that annoying ding, thankfully just opening and closing the door 'fixed' it. The video has given me many ideas though. My door won't latch in motorized mode, but when I disable the motor (using an overhead switch), it latches just fine in manual mode. I'll give your suggestions a try, and see if my 2008 Uplander will return to normal. thank you
@garyjohnson801
2 жыл бұрын
That file is called a Pipping file
@user-kw5ze5ky5q
2 жыл бұрын
You need the special tool to adjust the side bearings. They need to be torqued to 75 ft lbs for proper preload. The dealership I worked at had one, so I bought one from eBay for about $50 that someone made. Worked great not having to move the tool from side to side during the process. However I didn’t enjoy rebuilding these for 3.7 hours under the pinion nut recall. That’s why techs struggle to make money in dealerships
@philg4116
2 жыл бұрын
Thanks. I’d still want to see if I could test the switch with a VOM etc, hate replacing stuff that still works.
@Mrfalgons
2 жыл бұрын
Cause I’ve had to change my headlight in my truck maybe four times and all four times I’ve been able to do it without removing a single screw all you do is stick your hand in there twist pull it out replaced put it back in done deal you’re good to go
@charleeloisfoote280
3 жыл бұрын
Good and detailed 👌
@3sidesofeve711
3 жыл бұрын
My 2002 Dodge Caravan wont crank. I hear no clicks and I jumpered the ignition relay and it cranked. I checked the fuses and they were fine. Next up is that ignition switch and that didn't work. it's got to go into the shop now.
@xlargetophat
8 ай бұрын
@@justinbecker3340Justin. I'm in the same predicament. Did you have the red dot on the dash?
@justinbecker3340
8 ай бұрын
@@xlargetophat yes
@justinbecker3340
8 ай бұрын
The red dot means no communication to the computer. The new PCM remedied the red dot and all is perfect again.
@justinbecker3340
8 ай бұрын
Did I post how I fixed mine? I purchased a new PCM from a company in Florida for only $200... preprogrammed to my VIN for my 2003 Town and Country... perfectly easy and effective. Saved my van. I am beyond happy at fixing it myself. Saved a ton of money.
@xlargetophat
8 ай бұрын
@@justinbecker3340 I'm wondering if a parts store can reprogram a used PCM I have.. hmm
Пікірлер