One has to wonder how such a complex pump survived into the era of the CAV DPA pump.
@ColinMill1
4 күн бұрын
Interesting that this pump has an advance mechanism on it. As far as I can find this was not original equipment on the MF35 or the MF35x. Also, my fairly late 35x has the set code stamped on the plate so I guess this is a replacement pump possibly from a Land Rover where the advance mechanism was used. The ident. plate also looks like a more modern variant.
@poulgammelgaard8868
4 күн бұрын
You are right. I do not know what this pump came from. I got it as payment from a man with hundreds of tractors and combines. I do not think he had Land Rovers though.
@PerpetualMan22
13 күн бұрын
Loved the gear puller joke, should always lubricate the bolt in center of puller and use a 1/2 drive impact wrench (300 lbs of hammer torque)
@poulgammelgaard8868
13 күн бұрын
Thank you for commenting
@evanjones2539
Ай бұрын
Great informative video, cleanliness and zero bullshit...
@poulgammelgaard8868
Ай бұрын
Thank you very much
@martinamadsen812
Ай бұрын
Thanks for sharing this video, unfortunately it lack the close-ups and explanations which would let me fix my Ferguson's injector issues that occoured after I took out the small fuel filter, spring and plunger, and apparently did not put it back, or added seals? I need very detailed video and explanations to understand what, if anything I need to rectify. Stay safe, regards Niels.
@andresgomez4834
3 ай бұрын
Muy buen video master👏👏 , ¿para poder aumentar o reducir el caudal de petroleo que perno debo mover? Gracias
@poulgammelgaard8868
3 ай бұрын
Thank you for commenting
@bojanmilovanovic8024
3 ай бұрын
Got one like that myself. Best tractor in its category for sure. Plus, if you have kidney rocks, that seat will fix it in no time :D
@poulgammelgaard8868
3 ай бұрын
Thank you for commenting. Good luck with your tractor.
@joseluispereiradeoliveira6345
4 ай бұрын
Quri saber o que seria vem diesel ate abomba enao sobe pros bico obg ja agradeço que deus oabencoe sempre ate
@poulgammelgaard8868
4 ай бұрын
Maybe the metering valve is stuck in the stop position
@user-mp5pt7zq3g
5 ай бұрын
Hvilken olie skal der på pumpen efter reparation/service?
@rukmanjakhar6116
5 ай бұрын
Hey I also have the same pump in my ford 3000 but the condition of my pump is ruff 😅 can you find me or source me another same pump if possible.I live in India there are only 10 tractor with same pump in India which are imported from England at that time and it’s impossible to arrange that same pump here. So can you help me to arrange that pump. I am waiting for your reply 🙏
@user-fw8ux5ti4n
6 ай бұрын
Does a defect in the diesel injector cause a weakness in the tractor’s torque when plowing? Please answer
@Mrbigp59
6 ай бұрын
where to buy all the little items not in the kit in the USA
@jordibret
6 ай бұрын
Jo tengo el massey ferguson 35x con el motor todo nuevo y la culata ! Pero cuando esta a relenting siempre hacer mucho humos 💨 nose que hacer ?
@user-ke9xx4dx2b
7 ай бұрын
Where did you order the plunger in element from?
@poulgammelgaard8868
7 ай бұрын
injectionpumps.co.uk, You will also need the special socket for the valve holders
@dantediaz6672
7 ай бұрын
1:00:44 What is the name of the piece that you place in the video, from minute 1.00.44 and what function does it fulfill? Could it be missing from my pump?
@antoniosa1115
7 ай бұрын
Trabalho espetacular. Tenho um mf35 para restaurar mas infelizmente não o vou conseguir com essa perfeição. De vila do conde vai um abraço.
@MrBruce0777
7 ай бұрын
I have the Ford 3000 with this Simms Injection pump. Sadly the Injection pump was already taken off when I got the tractor So I need to figure out where it was set as per timing marks at the pump. My middle plunger is stuck ( Soaking in Marvel mystery oil ) Now it's in CRC Evapo-Rust said to work great on rust ) So far I have not found a socket with the right splines either to remove the top section. I heard it's 34 teeth for Ford where Metric is 33 teeth. Pump did not have any or much oil in the right hand section....
@poulgammelgaard8868
7 ай бұрын
Injectionpumps.co.uk have the special socket. If you watch my video at 42.55 you can see the timing marks under the little cover on the back end of the pump. With the ford 3000 on 19 degrees BTDC on the compression stroke it matches. You find the marks on the tractor flywheel behind a little cover on the bottom af the clutch housing. I find it easiest to rotate the engine, if I take off the starter motor and have acces to the teeth on the flywheel. To figure out if the tractor is on compression stroke, you maybe have to take off the valve cover.
@tarikchamonsimaochamon5247
8 ай бұрын
Muito chique. 10:52
@Fran_S25Argentina
10 ай бұрын
Gracias
@JACKOMIO1
Жыл бұрын
Merci pour cette excellente vidéo
@RafaelZayas-ok7ub
Жыл бұрын
Quiero conseguir bomba Diesel ,furgoson 3 cilindro Ford usada Rafael Zayas PR gracias
@motorhead4003
Жыл бұрын
Need a replacement plunger for simms injection pump off of a 1968 ford 3000 the lever that the rail turns on plunger is broken. Any suggestions? Thanks
@poulgammelgaard8868
Жыл бұрын
Injectionpumps.co.uk have the parts you need: Simms Minimec delivery valve removal splined socket. ID: F14A, seal kit for Simms Minimec 3 cylinder diesel injection pumps: ID S13, plunger and element for Simms Minimec pumps 512506-42, ID M6A.
@motorhead4003
Жыл бұрын
@@poulgammelgaard8868 Thank you so much
@poulgammelgaard8868
Жыл бұрын
You can replace just one, but I would replace all three, but after replacing one or more the pump needs to be calibrated. You could alternatively just transfer the lever from a new plunger to the old plunger if you have a hydraulic press. It has to be oriented exactly the same in order to get the calibration right.
@atproduction1775
Жыл бұрын
kzitem.info/news/bejne/mGZozJZscp5peqw
@roythewho
Жыл бұрын
I have a 35x 1962 an my fuel pump dont pump any fuel to the 3 injector tubes, what can be the problem? Everything else is ok with the pump but nothing coming out of the injection tube holes
@user-ck5ye3pe1q
Жыл бұрын
I have a pump that I fixed two months ago and then it broke. How do I know the original parts
@user-ck5ye3pe1q
Жыл бұрын
How do I know the original pump head?
@josemmorab6794
Жыл бұрын
Nice video,can you tell me please where did you buy the gasket kit and additional parts?
@poulgammelgaard8868
Жыл бұрын
jose m mora b thank you for commenting. You will also need the special socket for the valve holders. Injectionpumps.co.uk have it.
@stestrupholm-dyrkjorden
Жыл бұрын
Tak for den detaljerede video!
@stestrupholm-dyrkjorden
Жыл бұрын
Hvor fik du den lille gummidims til den knap man trykker ind for at give ekstra brændstop under opstarten? Bruger den altid i koldt vejr, men gummiet er ødelagt.
@poulgammelgaard8868
Жыл бұрын
Velbekom. Der sidder nok en næsten magen til på din Ford 5000.
What is the name of the tool used to remove that stuck cover with an impact wrench? It has a center punch and pry grippers. Thanks.
@zfilmmaker
Жыл бұрын
@@poulgammelgaard8868 thanks, that was very helpful!
@user-kb4no9ci1r
Жыл бұрын
Буває комбайн Вольво 800 день постоїть і потім треба довго гонити стартером, а на протязі дня заводиться без проблем в чому може бути проблема?
@steve7931
Жыл бұрын
Ten Stars , I salute you , watched with awe and great pleasure , inspirational the best I have ever seen .
@381alberto
Жыл бұрын
Hola amigo tengo una bomba igual y no sale gasoil por.el purgador de arriba, el de abajo todo bien, si saco la tapa podré solucionar, desde ya muchas gracias
@poulgammelgaard8868
Жыл бұрын
Alberto meroni thank you for commenting. Good luck with your pump.
@MrJason34601
Жыл бұрын
Any idea where I can find a replacement cam ring at? Can't seem to find the A309E.
@frimpongjustice1711
Жыл бұрын
Hello engineer Paul I am justice in ghana I over haul this pump twice a week .our problem is quality of plungers they brought here in ghana
@j1166240
Жыл бұрын
Loved your video! Thank you for posting, You are very talented and thorough in your work.
@poulgammelgaard8868
Жыл бұрын
j1166240 thank you for commenting.
@TheTradeuser
Жыл бұрын
was following your rebuild and tried to screw the cap off at 14:55. it broke off. What is this called and can it be ordered?
@poulgammelgaard8868
Жыл бұрын
Transfer pump rotor. There are different threads, left and right, inner and outer.injectionpumps.co.uk/?s=transfer+pump+rotor&post_type=product
@TheTradeuser
Жыл бұрын
@@poulgammelgaard8868 yes
@samuelwotring633
Жыл бұрын
I'd like to see what you went through for the timing of taking the fuel injection pump off the motor? I understand you got to be careful when you do that but it goes on exactly the same way?
@poulgammelgaard8868
Жыл бұрын
When you bolt the gear back on the front of the pump, the bolt holes are slotted, so you can not be sure where it is correct. Before taking the pump off, you have to turn the tractor to 19 deg btdc on the compression stroke. There is a little plate to take off on bottom of the clutch housing where you can read the 19 deg on the flywheel. On the pump there are timing marks on both ends, as I show in the video.
@thehermitish1
Жыл бұрын
Thanks for the very clear and detailed video. Was just wondering what the behaviour of the pump should be when the timing marks are aligned? Trying to help out with the rebuild of a Ford which has a similar pump, though 6 cylinder, and when we have the marks lined up fuel still flows from the number 1 valve when trying the spill timing. When we supposedly line up all the timing marks the tractor still will not start and we are wondering if there is something wrong with the pump and we should remove it to look at getting it serviced.
@poulgammelgaard8868
Жыл бұрын
thehermitish1 thank you for commenting. I would remove the top element and check it for stuck plungers and stuck delivery valves.
@thehermitish1
Жыл бұрын
@@poulgammelgaard8868 thanks for the reply, I will pass the advise on to the owner. We are able to get the spill timing to engage but the timing mark on the plate is a good 60 degrees back from the mark on the casing. Regardless, something we will have to investigate further.
@matui6983
Жыл бұрын
You will probably find your control rod or rack may be in the wrong position for spill timing. Vaccum gov pumps are different to Mark 2 mech pumps like this and they are different to D-series Minimecs in adjusting the timing. Plus you turn the engine in direction of rotation so that with the side door of the inj pump off you can see number one tappet lifting and what you want is the first of cutoff. Then replace the delivery valve, button it up, bleed it and I always pop the excess fuel Button to bleed the air out faster than cranking it over with it off and she should fire up straight away..
@kenh3344
Жыл бұрын
Well, a very nice effort. Meticulously clean, before the repaint. You deserve top marks for the restoration. 100/100. Just look like it came out of the banner lane factory at Coventry.
@poulgammelgaard8868
Жыл бұрын
Ken H thank you for commenting
@edgarfuentescolque8766
2 жыл бұрын
Buenas noches, un excelente video, una pregunta. A que lo llaman poner en punto..?
@krelle381
2 жыл бұрын
Hej hvor har du bestilt reservedele fra?
@poulgammelgaard8868
2 жыл бұрын
Hej Kristian. Det meste er fra injectionpumps.co.uk, de har bl.a. den specielle top til ventilholderne. en anden mulighed er: www.charnleys.com/part/leyland_middle/17h6606/fuel-valve-and-guide Mvh Poul
@gustavomansilla8323
2 жыл бұрын
Pa, me mire todo el vídeo, eres bombista , la verdad q es un oficio q mi hubiera gustado , y más ahora q creo q tengo q hacer la bomba de mi camioneta , saludos desde Uruguay
@JohnSmith-sf8gj
2 жыл бұрын
What do I do if my data plate is missing?
@simonbrooke4065
2 жыл бұрын
Brilliant, thank you, I have to overhaul mine tomorrow!
@luiscalderon6192
2 жыл бұрын
Great video, thanks for sharing your knowledge, i need to fix mine, but i can not find the kit, where can i get it?, tia!!
@poulgammelgaard8868
2 жыл бұрын
Luis Calderon thank you for commenting. You will also need the special socket for the valve holders. Injectionpumps.co.uk have it.
@brendenvosper7772
2 жыл бұрын
Why did you not speak to what you are doing?
@JohnSmith-sf8gj
2 жыл бұрын
I've had so many diesel mechanics tell me that the rebuild environment must be hospital clean, with dust free filtered air and paper suits. The engine will run away if you don't! I've got to spend 2 grand on a new pump they say! Yeah, I can do this. Thanks for posting.
@poulgammelgaard8868
2 жыл бұрын
John Smith thank you for commenting.
@emendoz1
8 ай бұрын
Mechanics sometimes fib. I run my tractor with diesel fuel I catch in a can from a long lasting leak and recycle it back into the tank. Been doing this for months and she runs just fine. I’m finally now getting to rebuild my injector pump now.
Пікірлер