Anyone who puts a Thumbs Down has no idea what they're missing... On the same chop or wakes, u would take a beating in a rowboat, jonboat or other flatter bottom. Little to no slamming, even at speed in a cat.
@nicstr28
5 жыл бұрын
I just got a 12' for free. Needs a little glass work but I've got a 15hp for it
@mocij77
5 жыл бұрын
15hp is enough for 12'
@richardcastillo5263
3 жыл бұрын
Good morning how are you. I bought one of these 12' without a motor I am planning on buying a 15hp but I don't know if I need a long shaft or a short shaft for it. Can you please tell me how low or how high the cavitation plate of the Motor sure be from the bottom of the transom on this kind of boats with this opening or tunnel. Thank you so much for your response in advance
@elimendez3761
6 жыл бұрын
Looks like you have it dialed in! What hp outboard and prop? What hight is the cavitation plate?
@mocij77
6 жыл бұрын
Eli Mendez that one had Tohatsu tldi 40. And set 4blade 12p. And had to place ventination plate little lowered from bottom of center transom.
@nt4g1
6 жыл бұрын
see how far forward the operator sits... The ONLY way to enjoy this boat.. I have a lv12 with 20 hp yammy and am in the process of moving the operator position forward...Scoots good though once on plane
@mocij77
6 жыл бұрын
agaveman i set jockey style console. So i had to place front to get rear room. It was nice boat. Plane in a 0.5 sec and could run in 3~4ft chop.
@Turbotalkin
3 жыл бұрын
Looking at getting a 12 myself any recommendations on power?
@richardcastillo5263
3 жыл бұрын
@@HandymanHustle good morning sir I just got me one of these 12' with no motor on it. My question is do I need a short shaft or a long shaft how high or how low the cavitation plate on the motor sure be from the bottom of the transom on this kind of boats with you the tunnel or opening in the middle thank you in advance for your response
@richardcastillo5263
3 жыл бұрын
@@HandymanHustle I will thanks so much for your response
@leolldankology
6 жыл бұрын
Is this a 16 ft?
@mocij77
6 жыл бұрын
leo ll exactly 15.5ft. So i'm making to 17.5ft due to outboard rating.
@leolldankology
6 жыл бұрын
Sean Cho Aajashi, go-mahp-sium-ni-da.
@mocij77
6 жыл бұрын
leo ll just confused but i understood. Wow you said korean!
@leolldankology
6 жыл бұрын
Sean Cho nadoo iy beh gak-ku-shippa. 🖒🖖
@mtilemtile5026
6 жыл бұрын
Great boat
@mocij77
6 жыл бұрын
true, she can cover 3~4ft chop smoothly
@waynewilliams755
7 жыл бұрын
not alot of those around anymore.
@mocij77
6 жыл бұрын
yes. she show nice performance, i'm doing restoring now.
@stephenlnoe
9 жыл бұрын
Is the LV14 with 40HP strong enough to pull a tube with a couple of people onboard the boat?
@Tylnorton
7 жыл бұрын
I'm a year late to answer for you, yes it is! My friend has an LV14 with a 40hp yamaha and he weighs about 220lbs and it was able to pull him for sure. And there was one other person on the boat. You can do it with 3 people, 2 on boat and 1 pulled easily.
@mocij77
7 жыл бұрын
steve noe of course.
@stephenlnoe
9 жыл бұрын
Man that bow rides high.
@BIGHEADODY
5 жыл бұрын
steve noe shut up. You have no clue.
@darrellmiller4412
4 жыл бұрын
steve noe Dr
@mtilemtile5026
10 жыл бұрын
Hey nice boat. Three questions what year is it, what is the horse power of the engine and what is the top mph? Looking into getting one of these boats. Thanks
@mocij77
10 жыл бұрын
This boat is 2013year and equipped nissan ( tohatsu ) TLDI 40hp. Top speed is about 34 m/h with 13pitch prop. thanks =)
@jsjrspivey
6 жыл бұрын
Wow 34 that’s impressive for a cat with a 40 I know they ride great
Пікірлер