Hi mate, I've done everything the same as you have, but mine is not starting😂 any ideas
@lanceford98
3 ай бұрын
Could be the purge not being good enough, I'd try that again and then hook up another car with jump leads sometimes they take abit more juice to get going. Bit of easy start Could also help to get it to catch
@lukesnyman4369
3 ай бұрын
@@lanceford98 thank you
@lukesnyman4369
3 ай бұрын
That did the job mate!!! Thank you very much
@lanceford98
3 ай бұрын
@lukesnyman4369 no worries at all happy to help
@marcustay242
7 ай бұрын
How many meters of fabric did you use?
@garviere
11 ай бұрын
Re manifold? No don’t bother to have it machined it’s probably like a banana! Just buy a de-webbed already machined one then it will give you no more trouble!
@garviere
11 ай бұрын
Please please! Great info but PLEASE! Stop spinning the camera back and forth, we don’t need to see you talking we can hear you fine, an occasional turn to you is fine but it’s much more useful to be able to study what you’re talking about rather than making us dizzy by whipping the camera needlessly round for selfie view, we really don’t need it. Otherwise though a very helpful video! 👍😊
@phill3144
Жыл бұрын
You purge the fuel system by pressing the accelerator pedal around 5 times, then repeat the process 5 times, no need to use the starter motor
@minimoto1733
Жыл бұрын
you kinda look like jack whitehall haha
@garviere
Жыл бұрын
wooooorupp!! Sorry just threw up. Can you stop swinging that stupid selfi stick! Don't you realise the background goes into warp mode when you do that, we don't need to keep seeing you talking so ne need to keep swinging the camera back to you all the time, we can still hear youwhen you're showing stuff... PLEASE why can't you youtubers when dping this kind of content your viewers are mostly not social media junkies living lives vacariuosly through the people they "follow" but serious people looking for info on the subject in hand. So PLEASE - PUT THE SELFI STICK DOWN! and just film what is important! Otherwise a very helpful video, just remember, (or decide,) why you are doing it, for social media fame or for good content for Disco 2 owners! Who do you want to follow you? Disco 2 owners looking for help or social media groupies with nothing better to do than follow "friends"! I do appologise fior the rant though, I guess the whold selfi thing really gets on my wick especially when good screen time that could be spent viewing the subject in hand is wasted on the face of the creator to no advantage to the subject. Helpfull stuff, just watch what you're filming and why.
@TheDanishMauro
2 жыл бұрын
And now 3 years later, no sidedoor videos? =)
@life107familyfitnessboxing8
2 жыл бұрын
Great info but I'm sea sick from camera shake and hosing. It is quite disturbing to watch with the quaking of the camera shakes. Thanks for sharing Try and concentrate on your camera steadiness and lighting plus show more of the TD5 rather than your face. You will get more subs and views if you improve on this quality
@Chorge1972
2 жыл бұрын
THX!!!
@antonshoolheifer5383
2 жыл бұрын
Makes a lot more sense than others doing the same thing
@survivalzoneswitzerland6697
2 жыл бұрын
Any chance you could keep the camera still for a moment ... otherwise good advice but a very nervous video (tip: get a gimbal)
@alexlancaster7681
2 жыл бұрын
Very helpful thank you, I'm going to be buying a Disco 2 soon. Turn it in to a tourer/overlander here in Australia.
@monkeyportions1722
2 жыл бұрын
Handy tip...when putting the gasket and cover back on, I put the gasket on and pushed those insert washers things into the gasket to hold it in place better.
@big5astra
2 жыл бұрын
What size of tyre is on this Discovery 2? It looks a good balance between the standard and not being too big. Thanks
@lanceford98
2 жыл бұрын
On this one is a 2" lift with some 265/75/16s. They are insa turbo Dakars
@big5astra
2 жыл бұрын
@@lanceford98 Merry Christmas Lance! With the 265/75/16's, did you notice much in terms of loss of power and would you maybe go slightly smaller on the tyre size in the future if you had another go at it? Thanks...
@lanceford98
2 жыл бұрын
@@big5astra hey merry Christmas tbh I would always go for that size unless I was going bigger on my tray back. Power wise wasn't an issue with a LoF power spec clutch and a very spicy td5 Inside map
@elijah6510
2 жыл бұрын
Info good but felt seasick within 5mins…steady the camera and stop moving it back and forth so much…really unsettling…Subscribed though
@حافظعلي-ل2س
3 жыл бұрын
The location of the solonide in the Discovery R2 engine and how to get it out
@gazzersmith8274
3 жыл бұрын
Any more vids pal
@GagoterapiaThe
3 жыл бұрын
Hi! Do you know if you can put the gear stick of the i30n in an i30?
@chrishahl
2 жыл бұрын
Im also interested!
@lukedavis436
3 жыл бұрын
I don't think there will be any Older Discoveries left by the time I even get the chance to buy one :(
@bordercanoe
2 жыл бұрын
Yes there will. Only issue is that prices are climbing big time for good ones. Rebuilds are worth ££££££££
@lukedavis436
2 жыл бұрын
@@bordercanoe that is true... Also with the ever expanding ULEZ zone driving them will also become Hell
@bordercanoe
2 жыл бұрын
@@lukedavis436 E conversions are becoming cheaper.. D2's will live on and be worth ?.
@lukedavis436
2 жыл бұрын
@@bordercanoe EV conversions aren't really my thing but..... What can one do these days.. I can't avoid it
@nlomas
3 жыл бұрын
Well done for doing a video. I'd suggest using a siemens VDO pump. Aftermarket are crap and the old saying goes, buy cheap buy twice. As for the water sensor on the fuel filter, i've unplugged mine and most remove as they were so crap landrover removed them themselves as they constantly had faults. Once again great job for making videos
@capsy9
3 жыл бұрын
an embroidered n badge would look good on the front of the panel to set it off , cheers for the video been looking to do this on my i3on
@landroverman79
3 жыл бұрын
Great videos when's the next one coming out?
@martinhogan5970
3 жыл бұрын
Question: I’ve installed not one but 2 of these pumps and at 25% on the gauge my tank is empty. I’ve checked the resistance and it checks out with what the shop manual says it’s supposed to read. Am I doing something wrong?
@lanceford98
3 жыл бұрын
Thats a strange one, I'd suggest starting with simple things like checking fuses and the gauge it's self if not it could be in your loom somewhere. Hope you get it sorted!
@martinhogan5970
3 жыл бұрын
@@lanceford98 thanks for the prompt reply. Everything was fine-except for the pump not pumping-before I replaced it. Someone commented elsewhere that it might be a Bosch specific pump that’s required…. I’ll go through the steps. Thanks again.
@lanceford98
3 жыл бұрын
@@martinhogan5970 how strange I've only ever used the ebay ones so not sure, dose the truck still turn over and do everything else correctly?
@martinhogan5970
3 жыл бұрын
@@lanceford98 yes. Runs fine. Just won’t show less than 25% on the gauge.
@lanceford98
3 жыл бұрын
@@martinhogan5970 thats so strange wish I could be of more help but I've never come across this issue. Bad ground maby ?
@Orihe
3 жыл бұрын
Get mine this Saturday, excited. Sounds great!
@ZIPTRAVELS
3 жыл бұрын
The information is great. The shaking of the camera isn’t. Also, show the car items and not just your face the whole time.
@jimmytwizzle7836
3 жыл бұрын
All I can see is this guys mush.
@lanceford98
3 жыл бұрын
My mush you say ?
@SniffingGlue
3 жыл бұрын
Brilliant video! Do some more!!
@lanceford98
3 жыл бұрын
More to come!
@brianabbey3635
3 жыл бұрын
Keep camera on stand it makes me dizzy when you are waving it about
@imSparksOG
3 жыл бұрын
Really wish you hadn’t sped up the video, not 100% clear on how to take the parts off... Otherwise great video. Thanks
@CheekyChristos
Жыл бұрын
slow the video down to 0.25 and you get to see it abit better
@enriquemartingonzalez8625
3 жыл бұрын
Un vídeo de cómo cambiar el arnés de inyectores y te dure poco..ya que no quitaste el problema de las juntas y arandelas de los inyectores..y de cómo nunca poner una junta de tapa balancines así no..amigo así no..
@landroverman79
3 жыл бұрын
Just found you channel today very helpful, especially the D2 td5 buying guide. I'm looking for one at the moment so will come in very handy
@TheMachine4ever1
3 жыл бұрын
You can leave it on ACC and pump the throttle 5 times and the MIL light comes on and it purges the system
@lanceford98
3 жыл бұрын
This is another one of the ways people suggest ill keep this pinned for anyone who wants to do it this way
@TheMachine4ever1
3 жыл бұрын
your HB is gone
@lanceford98
3 жыл бұрын
What is the HB your referring too ? 🤔
@TheMachine4ever1
3 жыл бұрын
@@lanceford98 harmonic balancer
@lanceford98
3 жыл бұрын
@@TheMachine4ever1 I'm sure it's on there I'm going to have to get under and have another look now ahaha
@fruittella2585
3 жыл бұрын
Great video man can't wait to see your video on roof lineing only think that let's down my d2 es autobiography
@lanceford98
3 жыл бұрын
Thanks man means alot
@fruittella2585
3 жыл бұрын
Great video had to do everything you have mentioned even the rubber part of the propshaft fell apart and is somewhere down the m5 !
@lanceford98
3 жыл бұрын
Ah the lovely rubber donnut they do like the break at the worse times
@SniffingGlue
3 жыл бұрын
That was great! Cheers!! Been on the looking for a decent disco for a while. Going to see one at the weekend. These tips will come in handy. Subscribed!
@xXVi0l3ntG4m3r5Xx
3 жыл бұрын
Definitely really worth a watch if interested in buying a TD5 Discovery 👍🏼👍🏼 looking forward to future videos around this truck
@big5astra
3 жыл бұрын
Subscribed. But please see if you can improve the camera lighting so we can see what you're pointing at or working on. This will be crucial for the "fixing" videos on the car. Cheers
@lanceford98
3 жыл бұрын
Thanks for the sub I really apricate it! , I've bought some soft lights to film with now so no more bad lighting hopefully
@BuildSomethingAuto
3 жыл бұрын
Well it rolls coal so I'd call it fixed 🤣. Didn't realize disco's did that, that's hilarious. Hoping we get to see you wheel it sometime!
@lanceford98
3 жыл бұрын
most of the TD5s will roll coal when mapped mines running around 21 psi, i cant wait tog et back out in the dirt just gotta wait out lockdown
@BuildSomethingAuto
3 жыл бұрын
@@lanceford98 I feel that 😣
@lanceford98
3 жыл бұрын
@@BuildSomethingAuto at least it gives me time to build the other truck you've not seen yet
@skipper_mtb6644
3 жыл бұрын
Love the content mate, interested to see what other fixes and maintenance you've got planned for the disco - gives me some inspiration on what I should be doing to keep mine alive!
@lanceford98
3 жыл бұрын
Thank you ! ive got alot planned for this Disco and ill also be bringing my D2 Tray back project to the shed next week to make some more content on that
@skipper_mtb6644
3 жыл бұрын
@@lanceford98 Sounds sweet! Excited with where this is going
@Simon78
3 жыл бұрын
Nice run through what to watch out for ! Looking forward to more.
@lanceford98
3 жыл бұрын
Thanks im glad you enjoyed it sick around for more
@monkeyportions1722
3 жыл бұрын
Good pointers there, thanks a bunch! Will hopefully be picking one up in the next couple of weeks so will definitely keeping an eye out for all those things.
@lanceford98
3 жыл бұрын
No worries stick around to find out how to fix them as well !
@question025
4 жыл бұрын
may i know which kind of glue should use on?
@lanceford98
4 жыл бұрын
any fabric contact glue
@jimbobthe2ndorthe3rd76
5 жыл бұрын
As already mentioned, should have done an under the hood shot maybe before and after. A drivers POV would have been a good idea too
@000Steven0000
5 жыл бұрын
Great work. It looks pretty good. I am about to buy an i30n as well and will do this too. Do i have to use some special kind of sweat for this?
@lanceford98
5 жыл бұрын
Nope just use what ever material you fancy !
@bbakmese
5 жыл бұрын
Great Job , very nice Best regards from Hyundai Germany WhatsApp Group ✌🏽
@shiftypyros
5 жыл бұрын
Gone and done this myself after seeing how easy the parts came off. Good video!
@lanceford98
5 жыл бұрын
Nice one man !
@MrSupersixfour
5 жыл бұрын
That's Brilliant, have the same car myself but - the skill set to do that. Great job
Пікірлер