What hose and gun are you using on the AVA? I’m not a huge fan of the gun and lance that it came with.
@btleier
Ай бұрын
Could you share more about why in you process you use Tea first on the wheels prior to a clean with AWC? Is it to help dissolve tar and other road contamination? If so, do you find it effective in the spray on, dwell, rinse off scenario that you are using it in your videos?
@cung43
2 ай бұрын
blandingsforhold på Vorreiniger B? satt du helt på Pluss, Minus eller i midten? PF22.2 ( blandeventil )
@bimbamm9135
3 ай бұрын
Hello, how many ml VB need for 1ltr ?
@redsresearch
4 ай бұрын
how do you remove salt thats been on car for tears and tears?
@ThomasWood-sk1qy
4 ай бұрын
Nice video 👍, Debating super foam or Vorreiniger b for a pre wash, wanting to use it through out the year I am aware of these being high PH they can degrade coating but rather that and top a coating up that scratches from the contact wash. Also deciding on a contact wash I was looking at AF, As and GSF and not really sure what one to pick leaning more towards AF or As but does As foam well as I like to snow foam the car for the contact wash stage, any help would be much appreciated thank you 👍
@user-eh2el5dw1m
3 ай бұрын
If you’re using SF as a pre wash I would use either GSF or As for a contact wash not AF as the higher PH is not needed if it doesn’t have time to dwell.
@antonel315
4 ай бұрын
How often it is better to use RRR during winter?
@paulcowen1976
4 ай бұрын
You would get a lot more views if you spoke
@fragger1193
5 ай бұрын
Where did you got those sticker for the spray cans ? Love your work
@jonasrikter8280
4 ай бұрын
We bought them via a webshop that supplies Koch Chemie products. the stickers are made from Koch chemie to match the respective products etc
@TheJfburn
5 ай бұрын
Anbefaler du AVA sin høytrkkspyller?
@jonasrikter8280
4 ай бұрын
Anbefales på det sterkeste. Vi har hatt denne Ava P80en i nesten fire år snart. Kun en liten mikrobryter som har gått, men denne fikk vi selvfølgelig på garanti (10 år). Fantastisk spyler med både godt trykk og vannmengde. Vi har derimot som du ser i videoen kjøpt custom pistol og div dyser, da vi liker quick connect og robuste ting!
@vladj
5 ай бұрын
this liquid sparay wax is a shit, which lasts for only a few weeks. Use products which applied with hands. I use hydrophobic liquid which I apply with towel, it keeps for whole winter with salt, now after rain it look like new from dealer.
@DetailingCars
5 ай бұрын
We use both. The paste wax can be worn down during winter, so we use a spray wax to keep the car hydrophobic
@davidbarath1
5 ай бұрын
The music is similar as a hungarian folk music A Csitári hegyek alatt.
@sokigasp8886
5 ай бұрын
Great video!!!
@mikeblin9614
6 ай бұрын
Pre-wash instead of pre-rinse? You love to waste product
@jonasrikter8280
5 ай бұрын
Who doesnt love prewashes!?
@nachoc.9406
6 ай бұрын
Very nice, nevertheless i will never buy a car after saltbath.
@speakingtruths4215
6 ай бұрын
As bad as the salt is, the depreciation is even more horrifying.
@madanto2394
6 ай бұрын
Literally knocks £10K Off it
@csfynabranch4496
6 ай бұрын
Wtf I thought the wheels were silver, they were black?
@novitom
6 ай бұрын
Nice, but that music😮😢
@colechapman6976
6 ай бұрын
My issue is that as soon as you drive back to the home it will already be dirty again! Winter driving sucks
@Celticmouse
6 ай бұрын
Wheels, tyres and arches first surely
@sebster6031
6 ай бұрын
Great job. However, that Audi paint is / was still full of minerals after contact washing it. In this case an acidic shampoo for contact wash would have been the preferred choice.
@Marszczak
6 ай бұрын
Lots of salt. Best way to dissolve salt is to use water. Other chemicals will help to remove other contaminants - no doubt about it. Keep it clean:)
@mareksalaga
6 ай бұрын
Its just salt... dont worry
@MoiseanuMariusAndrei
7 ай бұрын
just a quick tip...whipers always should be down for wash as well and then you cand rise them up to dry out and don t forget the diesel or petrol cap as well,it can get very messy if it hasn t been done for years
@jonasrikter8280
7 ай бұрын
The car in the video is a electric vehicle? He did wash and dry the charging port at 6:32
@Autohigiena
7 ай бұрын
Hey when product is undiluted is 100% no 0% but I could have got you wrong...
@imeprezime9280
7 ай бұрын
Just high pressure washer and that is it. Normal condition after highway.
@jonasrikter8280
7 ай бұрын
This is extreme salting conditions, not evne remotly close to highway conditions.
@imeprezime9280
7 ай бұрын
@@jonasrikter8280 my car always look like that after few km on highway in winter, and i wash it on self service carwash for a few euro.
@imeprezime9280
6 ай бұрын
No it is salt on highway high speed drive. Normal salt quantity
@stamoan
7 ай бұрын
Ok, definitely feels good watching it but anyone who has washed his/her car knows that you are always rinsing direction top down otherwise you are just wasting water
@TimMSUK
7 ай бұрын
And any professional detailer or valeter knows when using a pre wash chemical you rinse bottom to top
@jonasrikter8280
7 ай бұрын
@@TimMSUKthis is the way😎😎 prewash = bottom to top, contactwash = top to bottom
@mic21ha
6 ай бұрын
@@jonasrikter8280and why, whats the advantage?
@jonasrikter8280
6 ай бұрын
@@mic21hawhen you apply prewash you want it to dwell and work on the entire car for as long as possible. Due to gravity the soap runs down and therefore the bottom parts will have more dwelltime in general because of this. If you start from bottom the top parts will still have soap on and is able to dwell for longer. It is also easier to see where you have rinsed
@mic21ha
6 ай бұрын
@@jonasrikter8280 ah ok, thank you
@alexpope5327
7 ай бұрын
Great content. We recently got a snow storm here where I live in the USA, we rarely ever get that, tons of salt accumulation on my car. Recently got some TEA, anxious to give it a try when it warms up some. I don't have the other foam product so I will use GS 10:1 with a splash of CARPRO Lift for some suds in my Pro 12 IK Foamer. I do love Protectorwax at the end, one of my favorite products.
@jonasrikter8280
7 ай бұрын
ProtectorWax is amazing. Love the smell and shine it gives! You will love TEA it literally melts the salt right off the vehicle. Use it before the prewash and you will be amazed
@loboantonio2486
7 ай бұрын
Ok the "base" is good,but the products seems very effective and overall the skills and the method are great. Awesome.
@w-j7210
8 ай бұрын
Hi, great videos. I have been watching them and reading all the comments several times. I have ordered the TEA and Vb 10L (live in Sweden) after seeing your videos. Also ordered the PW. I have the Gsf for bucket wash, the GS that I use as an APC and the PSS that I use for exterior plastic. I have a couple of questions. 1. Can I use the PSS after cleaning the engine area with GS? 2. Can I use the PSS on the grill or glossy exterior plastics. 3. Normally I use cheap tar remover that is half price compared to TEA, are there any benefits with TEA over the cheaper options Thanks.
@jonasrikter8280
7 ай бұрын
Hello! You can use PSS on plastic trims, we use it at engine plastic and more :) I would agree that TEA is expensive, but compared to other options we have noticed that TEA is slightly more effective and use less product. But hey oil degreasers is not the product i would worry that much avout. The cheap options work great as well. A good prewash (snowfoam) with the correct ph level is way more important. Gs and carpro lift is great alternatives, but if you can get your hands on VBN you should get it!
@user-dd6iz8sn1o
8 ай бұрын
You are not profi with wheel cleaning
@at1533
10 ай бұрын
Great video
@btbd2785
11 ай бұрын
Did you spray your whole car with Teerwasche before adding super foam. Instead of Super Foam can you use the As which has a ph 9.0 and add some GreenStar to make it even more alkaline?
@wd8005
10 ай бұрын
@@RojohIIDo you think Tea is necessary to use in Canada? Same frozen climate but all the roads are pure concrete not asphalt like in Europe so there’s no tar that can sling on the car. Does Tea help remove salt or is it purely because of the tar? I’d imagine salt, sand & tar would be pretty hard to remove even with a strong prewash.
@RojohII
10 ай бұрын
@@wd8005 I would probably use Tea or simaler products when roads are salted. I guess the main contamination is the oily and salty-roadfilm since the roads stays wet/don't dry for a longer period of time. My guess is that you'll want to use something that can resolve oilfilm. One other alternative could be a good citrus-based degreaser, but they tend to cost a bit more.
@wd8005
10 ай бұрын
@@RojohII Oily Roadfilm? Pobably in Europe I guess because of the road itself, Asphalt is made of Crude Oil. Roads where I am is mostly bone dry as long as it's above freezing. Probably the only concern for oil is mostly leaks from vehicles not due to Asphalt roads like in Europe. We get some Freeze-Thaw cycle sometimes in the winter because of Chinook Winds it's warm air from the mountains it causes a sudden change in temperature which causes thawing of snow and everything in the road so it's slushy then after that it's back to freezing again. That's the only time the roads are wet. No rain here it's either Sunny & Dry or Snowing. Basically no humidity here we needs lots of moisturizers to keep our skin from drying out that's how dry it can get.
@RojohII
9 ай бұрын
@@wd8005 I think you should evaluate the actual condition of dirt on the actual car. If it's just non-oily dirt, a good alkaline prewash will do the trick. If its oily, then a degreaser is handy since the average foams or prewashes wont do much dent in the dirt. Main point: You're gonna do a contact wash anyway to get the car squeky clean. Question is: Is the car 70, 80 or 90% clean before you start rubbing it (in)?
@wd8005
9 ай бұрын
@@RojohII Thanks for the suggestion
@barrywjr13
11 ай бұрын
Thank you for the video. I have an Audi E-tron as well and have been looking into the Koch-Chemie products for detailing my car so this video was very helpful. I have a few questions that as an E-tron owner you might be able to answer: 1. With a ceramic coating on the car, do you think using PW is necessary? Which washing agent is better for ceramic coated cars, GSF or NanoMagic shampoo? 2. Have you cleaned and used the MotorPlast under the hood of the car? Any tips if you have? 3. The E-trons as I’ve learned have a problem with building up brake dust over time, have you noticed less of this build up when using the Koch-chemie products to clean your wheels? Thank you again for the video and any advice.
@jonasrikter8280
9 ай бұрын
Thank you for the feedback. 1. No, PW can ruin the coating, only use top coats or boosters that is made for coatings. We only use wax free soap on coated cars. This car was only coated with a paste wax. 2. We have not tried the MotorPlast yet, seen good feedback with it though. We only use GS diluted for enginebays / plastics. For plastic trims we use PSS. 3. Yes we have noticed less buildup, but the problem in general is the weight of electric cars. E-Tron is a beast at over 2,5 tons, so you need to expect brakedust buildup. This is not just a E-tron issue, all cars get brakedust. Hope this helps :) -Cofounder of Detailing Cars channel
@barrywjr13
9 ай бұрын
@@jonasrikter8280 thank you for the response and helpful information.
@progettoenergia6298
11 ай бұрын
Ottimi video con specificati i prodotti e le diluizioni utilizzate. Quanto di meglio che ho trovato online per ciò che riguarda i tutorial. Gradirei video più completi con tutti gli step del car detailing per le singole vetture. Giudizio: ottimi video!
@DetailingCars
11 ай бұрын
Grazie!
@w-j7210
8 ай бұрын
Agree with you. Best videos.
@jeremymusa1544
Жыл бұрын
I have a question. How does rinsing from bottom to top allow for more dwell timw and dilute the foam less?
@kswetr
Жыл бұрын
Great Vid! More of it please🙏🏻
@user-pj6lc9xz7t
Жыл бұрын
Hi, great job 😁. Can I ask what fittings you have used to connect the Suttner gun to the AVA pressure washer, I’m trying to figure out the same thing?
@user-pj6lc9xz7t
Жыл бұрын
Hi, great job 😁. Can I ask what fittings you have used to connect the Suttner gun to the AVA pressure washer, I’m trying to figure out the same thing?
@chrisbradley3224
Жыл бұрын
Do you ever mix GSF and GS for a foam prewash? Is it a good substitute for Vbn or Active Foam for a less dirty car?
@DetailingCars
Жыл бұрын
As it is PH-neutral, it does not have much cleaningpower. We use it only after prewash to lubricate the surface to minimize friction when cleaning with a washmitt :)
@murissehovic7518
Жыл бұрын
We need more videos like this 🙏👌
@knottssonasty3603
Жыл бұрын
Dude this was a really cool video to watch. First time watching and I loved the back and forth from you detailing to the sweet tunes playing on top of a really nice detail. Very cool 😎. Had to sub!
@dpugelj123
Жыл бұрын
great video! How come you diluted KCX Super Foam 1:4? I can not figure out how active foam to put in my foam cannon. Some use it undiluted. The KCX website is really confusing when it comes to dilution ratios 🤔
@DetailingCars
Жыл бұрын
We have just experimentet a bit and found that 1:4 works well for us, i would probably recommend trying some diffrent ratios until you are happy with the results.
@ruandebeer5496
Жыл бұрын
Love your videos dude...so satisfying...its so difficult for us in South Africa to get the full range on Koch Chemie products, we are very limited...wish i could get all the products...keep them videos coming and keep on doing a great job.
@Lisevskyan
Жыл бұрын
Very good video. Make more !
@originalguy4535
Жыл бұрын
Car pro or koch chemie? Who has better car shampoos?
@ONI1013.
Жыл бұрын
3:45 - Never knew it was safe to power spray the lower inside door panel and door jam. Usually use light spray and MF towel, but it’s so dirty. Also have an Etron with the same rubber molding and illuminated door sill. Interesting… 🤔. Also
@jonasrikter8280
Жыл бұрын
Never ever heard that it is not safe to spray inside door jams etc. We do this every time, not a single issue caused by this!
@ONI1013.
Жыл бұрын
@@jonasrikter8280 Thanks. I assume we still need to be careful when spraying with a pressure washer, that you still don’t want to get water inside the door panel or inside the car’s interior. But good to know that we can use it on those pesky door jambs and bottom door panels.
@jonasrikter8280
Жыл бұрын
@@ONI1013. always smart to be careful, totally agree with you! Water inside the speakers / interior is a no good. We sometimes also just use running water on the door jams after an apc!
Пікірлер