Yes but where do you get these pieces ? Specially the long one - 16 cm long
@retoreto123
Ай бұрын
@@RafaelCayuela-vt1ym go to a big store who sell iron things and things for constructions. If the screw is too long , then cut it with an iron saw 😉
@FuchsHorst
6 ай бұрын
Make sure not to screw the bolt too tight as it will wear out the bearings.
@tomjennen
7 ай бұрын
I applied your solution a few days ago and it works very good so far.
@davidmanzi4491
9 ай бұрын
Does Garmin have a solution? Mine just started doing this.
@retoreto123
9 ай бұрын
Nope 👎 I have the 2nd Version. But still the same problem. I can‘t understand such a great engeneering problem.
@Parlabane791
9 ай бұрын
I had just watched the video again three months/~1.000 km after installing the solution (thanks for the vidoeo again!) because on the ride yesterday a noise in the pedal bearing area started. For test purposes I removed the long bolt to possibly hear a difference. I noticed that the washers were now visibly bent inwards and the left pedal arm was loose again. I corrected this and fitted the screw with the washers turned around for the time being. The noise is gone for now. I will now try to find a 1.2 mm thick screw instead of my 1.1 cm thick one and new, hopefully more stable washers.
@retoreto123
9 ай бұрын
I have optimized: on the both ends of the screw I put some tape around. Now the diameter fits perfectly to the tunnel (the screw is now perfectly in the middle of the tunnel). My washer dont make any noises 😊
@Parlabane791
9 ай бұрын
Thank you for the detailed video! It works with my bike very well. I was worried that my ankles could get close to or even contact the screw head or nut but but the clearance is good enough.
@claudiovincenz6675
10 ай бұрын
Is there anyone, he had the same problem with Neo bike plus
@raunefare
6 ай бұрын
Yeah mine just fell off 😂 and it is still a problem on V2 from what I can understand
@matteodisanto8535
10 ай бұрын
Hi and thank you so much for this, I applied your solution and it helped a lot! I still have some small movement I can feel while pedaling, is there any other trick?
@retoreto123
10 ай бұрын
Do you have good thighten the nuts? If yes, it is not possible that the pedals have some movements. Bought nuts are squezzing the pedal arms together.
@matteodisanto8535
10 ай бұрын
I agree with you but maybe my problem is different... I do not feel the wobble when there is road feel ON, if it is NOT ON, I have it again @@retoreto123
@johnteuber
10 ай бұрын
Did this and it works great except the washer on the left side is rattling when I pedal. Do I just need to tighten the nut more or do I need another washer?
@retoreto123
10 ай бұрын
I am glad to help other people. You have to tighten a little bit both nuts. Not to hard, but the washers shouldn‘t rattling.
@retoreto123
10 ай бұрын
You can wrap tape on both ends of the screws. This has the advantage that the washers do not wobble and that the screw passes through the axle centered. Simply wrap it around the screw a few times until it is exactly the same diameter as the housing.
@johnteuber
10 ай бұрын
@@retoreto123 I ended up just duct taping the washer to the crank arm and it fixed it. Appreciate the additional reply though!
@RedPine895
10 ай бұрын
Thank you so much for posting this video. I did as you suggested and it worked perfectly.
@retoreto123
10 ай бұрын
Glad it helped
@cmuench
Жыл бұрын
Great tip. I had the same problem and this really fixes it.
@retoreto123
Жыл бұрын
Glad it helped
@marcus_velo_9970
Жыл бұрын
good one!!! I would recommend an allen key bolt with the flat head and a nyloc nut or loctite.
@retoreto123
Жыл бұрын
Thanks for the tip!
@Parlabane791
9 ай бұрын
Thanks, I did it exactly the same way.
@reiviana
Жыл бұрын
Thank you, I just have a problem today, the plastic star screw is loose, I will try your solution.
@gurrfamily416
Жыл бұрын
This is really helpful. Thanks!
@retoreto123
Жыл бұрын
Glad to hear it!
@WernerPriewasser
Жыл бұрын
I fixed it with the Crank Bold von SRAM DUB - Bottom Bracket. Before that I had a test solution like yours. The crank material is just too soft. The crank therefore requires contact pressure.
@retoreto123
Жыл бұрын
I have also tested a better Bold - but after 2 weeks the pedal was loose. I think that this construction with the little screw can not hold durable the crank arm with the force that is generating during pedaling. With this solution, the crank arms are squeeze together and the left crank arm can not go away...
@reiviana
Жыл бұрын
Does the sram Dub screw works good?
@retoreto123
Жыл бұрын
@@reiviana I have tried it but after 2 weeks it has to came out again, and the left pedal began to wiggle again. Though I loose the little screw first, then screwed the Sram Screw in and then tighted the little pedal screw very hard. So I began to analyse the problem with the wiggle pedal and found the solution "how to prevent that the left pedal loose the contact to the bike-body" and now I am over 2 months happy.
@WernerPriewasser
Жыл бұрын
@@reiviana I had to readjust the screw about 2-3 times, but I'm satisfied.
@DocHollyday26
Жыл бұрын
i will test it thanks
@rabie129
8 жыл бұрын
was hast du modifiziert ?
@retoreto123
8 жыл бұрын
Je links und rechts ein Metallrohr von ca. 45 cm Länge in die Endrohre geschoben. So werden die Resonanzkammern im Endtopf "überbrückt" :-) Hier ist alles bis ins kleinste Detail beschrieben... www.pff.de/porsche/index.php?thread/2746922-serienauspuffsound-v8-freilegen-fuer-16-dollar/&pageNo=1 Viel Spass...
@retoreto123
8 жыл бұрын
Hier noch der Vergleich (vorher / nachher) kzitem.info/news/bejne/r6h73quEkaannpg kzitem.info/news/bejne/2p5_tKGJj4ODlY4
@roboost9251
9 жыл бұрын
Great sound but what is modification?
@retoreto123
8 жыл бұрын
+rob osy Hi Rob Osy This is the video "before" the modification (original Cayenne S Sound): kzitem.info/news/bejne/r6h73quEkaannpg I found the instructions in this Forum (Porsche Community) www.pff.de/porsche/index.php?thread/2746922-serienauspuffsound-v8-freilegen-fuer-16-dollar/&pageNo=1 Basically, I have put two metal pipes the end-exhaust. So now the last exhaust has no longer any "function" (the exhaust gases go directly through)
@ocrim16
12 жыл бұрын
hahhaah goopffertami!! wuuuaaaa ;D schad um de sänder
Пікірлер