Molding flat sheets or simple curve parts where you need a cosmetic forged carbon look with the strength of a woven material.
@paolonieri473
8 ай бұрын
Thanks for sharing; do you make that clothes also with other kind of flakes (ie blue or red)?
@tomwilliams1396
9 ай бұрын
how come you fold the carbon over itself? im trying to get my wheel done and finding it very troublesome
@tomwilliams1396
9 ай бұрын
it just doesnt shine it stays jet black and i dont know why
@neonnerd1364
Жыл бұрын
I was like "hey I could do this" until you got to the stitching part 😂
@garydeandeery
Жыл бұрын
That’s a different way I’ll try it. I normally put the chopped carbon on then wrap around
@alekseiromanov6264
Жыл бұрын
На пленку нанести разделитель, разве так не легче будет отделять?
@xINVISIGOTHx
Жыл бұрын
What do people do with a double sided flat hard square of carbon fiber?????
@essejsepol
Жыл бұрын
Whats your price for this Job?
@crherniman
2 жыл бұрын
You made this look easy. I would probably have to do this 5 times before I got any decent results 😅
@user-re4xx1yq7k
2 жыл бұрын
😀а дальше что с ней делать ))). Вы на изогнутой поверхности покажите свой способ и результат
@andrewkantrovitz8912
2 жыл бұрын
Did you need to apply a release agent to the peel ply beforehand?
@ULTICARBON
2 жыл бұрын
The peel ply does not need any additional release agent. It is generally a good idea to apply release agent to the glass plates to ensure any resin that inadvertently comes into contact with the glass can be removed after it is cured.
@michelloevenich6820
2 жыл бұрын
Looks great! Solid work. Do you still know how much carbon you used for this? Looking to do it on mine and I’d like to know how much I need for the upper and lower part of the gripping area.
@jaquellarobinson3432
2 жыл бұрын
Nice don’t see why the foam was added tho . You can’t feel it through the resin
@cr4zym3x1c4n
2 жыл бұрын
I’m looking to make carbon fiber badges for my car maybe you can help me?
@hotchow8766
2 жыл бұрын
This is a fantastic concept for applications to old hollow body guitars.I would love to see the non-vacuum results. The only thing I dislike is that the VAT doubled the price of most of the better products sent to me in the USA. I want to skin my rifle stock but it's out of my budget. I must wait.
@boomaster
2 жыл бұрын
is that your tape? or something else? what do you wrap your steering wheel with?
@ULTICARBON
2 жыл бұрын
The tape used to hold and compress the carbon fiber during the cure process was Hi-Shrink release coated tape.
@boomaster
2 жыл бұрын
Это что,скотчем ты обматываешь? Или пленка простая узкая
@mgwaite10
2 жыл бұрын
Why not made a mould of the part and do a decent job ?
@joshadolphsen4767
2 жыл бұрын
Do you sell a kit that I can do this exact same thing at home ?
@ULTICARBON
2 жыл бұрын
We do not sell a kit, but 12x35 inch fabric rolls are available for small projects.
@joshadolphsen4767
2 жыл бұрын
@@ULTICARBON where can I purchase this
@ULTICARBON
2 жыл бұрын
The forged fabric is available at our website ulticarbon.com/product-category/12-x-35-inch-forged-carbon-fiber-dry-fabric/ and at the Ulticarbon storefront on Etsy www.etsy.com/shop/ULTICARBON
@AndrewVanDay
2 жыл бұрын
I can't understand why the leather grip section is first completely covered with masking tape, and then @ 12:15 it is suddenly off and the leather is replaced without explanation. Yes it is smooth leather as opposed to perforated, but the previous covering looked fine. Was there a need to replace the leather? Did it get damaged?
@ULTICARBON
2 жыл бұрын
The faux leather grip material was replaced with a lightweight top grain leather for cosmetic purposes. Tape was applied over the grip area to minimize mess during the carbon application process. If an existing grip covering is to be kept in a final part, it typically needs to be removed then reapplied after the carbon skinning process is complete.
@erepoustimou
2 жыл бұрын
Very nice video! Could you please tell the kind of peel ply you are using on this video?
@ULTICARBON
2 жыл бұрын
The material is a non-porous teflon coated peel ply.
@erepoustimou
2 жыл бұрын
@@ULTICARBON Very interesting never seen that before. Thank you for the answer!
@lan99327
2 жыл бұрын
HI! May I ask u how long did you vacuumed it? Is it vacuumed until it cured ? or just vacuumed for a few seconds? Thank u!
@ULTICARBON
2 жыл бұрын
The sheet is cured under vacuum.
@sity909
2 жыл бұрын
or you can save a ton of time and vacuum seal it with food grade plastic and boil it at the desired temperature.
@TheMineLt
2 жыл бұрын
wdym?
@truongvantuan6216
2 жыл бұрын
i'm in vietnam how i want to buy your forged carbon material Thanks
@internetttroll1908
2 жыл бұрын
Add ASMR to your title and you will get way more views. just a tip.
@sity909
2 жыл бұрын
Can I place a custom order?
@ULTICARBON
2 жыл бұрын
Forged fabric with a customized gold particle content etc. can be produced. Please contact us at [email protected] with your specifications.
@sirpfa
2 жыл бұрын
Hi, thank you very much for sharing. There is so much compliment that i would like to give you and questions to but i dont know from where to even start from but ill do it one by one. So can you please first tell me for how many years youv been doing this and in which city your workshop is located in?
@Induced-Chaos
2 жыл бұрын
That's gorgeous! I'd love to see an entire car made with this. Just the panels obviously.
@anikinrodriguez1221
2 жыл бұрын
@@collinabdullah3145 this is the fakest comment exchange I’ve ever seen in my life 😂😂
@darkshadowsx5949
2 жыл бұрын
@@anikinrodriguez1221 fake comment exchange? you're the only one who replied before i did just now... there was no exchange of comments happening until you replied.
@baonguyen-gj4kw
2 жыл бұрын
I want to know which epoxy you use ???
@vwjet357
2 жыл бұрын
I was wondering why peel ply was used, instead of the shrink tape+heat used in the steering wheel video? Is there much difference?
@Thomas..Anderson
Жыл бұрын
Peel ply leaves a roughened surface without amine blush. Therefore no cleaning and much less sanding is needed for additional layers of epoxy resin. For the steering wheel in other video a heat shrink tape was used to compress and contour the carbon fiber to the wheel. I guess peel ply could be used but it would be awkward and it would leave heavy marks due to compound curves.
@vwjet357
2 жыл бұрын
Is that a non porous peel ply? Or regular one that gives some texture?
@vwjet357
2 жыл бұрын
Are the stretchier bagging films like air techs stretchlon 200 preferred, over the regular airtech nylon bagging material for bagging and skinning parts (car fenders, etc)?
@vwjet357
3 жыл бұрын
Do you recommend any cheap vacuum kits I could look into that would do the job? Does wrapping in peel ply work just as good as vacuum bagging? The fabric seems to come in a max of 12”x35, limiting it to smaller parts.
@ULTICARBON
3 жыл бұрын
ACP Composites has some low cost pump options that will work for bagging. Wrapping in peel ply doesn't provide the same level of compression as vacuum bagging, but it can work well depending on the application. Small rolls are 12" but the full size rolls are 35" wide by up to 5 linear yards.
@maisonelephasmaisonelephas5721
3 жыл бұрын
You can send it without remove the gold flake??
@ULTICARBON
3 жыл бұрын
The fabric ships rolled between layers of plastic to protect the carbon and gold flake pattern during transit.
@bluspirit81
3 жыл бұрын
@ulticarbon the procedure is the same if you use standard Twill Carbon Fabric?
@thematrix6080
2 жыл бұрын
If you are looking to do a regular twill carbon fibre wheel, I suggest watching eco lap’s video on it, he does a really good job
@PotterMo
3 жыл бұрын
More power to your channel bud🔥👌🏾🤙🏾 New subscriber here 😁👋🏾
@garydeandeery
3 жыл бұрын
What resin did you use normal or polyester
@ULTICARBON
3 жыл бұрын
Epoxy resin.
@garydeandeery
3 жыл бұрын
Funny I’m just doing one too lol
@muxxgaming9242
3 жыл бұрын
Hi.. Where can i buy carbon forged like this?
@ULTICARBON
3 жыл бұрын
Forged carbon dry fabric is available at Ulticarbon.com.
@meroocars4005
3 жыл бұрын
Good job awesome 👏🏻 👍🏻
@D0wNhiLL
3 жыл бұрын
Looks siick
@MrJmbm17
3 жыл бұрын
Where do you get the shrink tape?
@ULTICARBON
3 жыл бұрын
Composite Envisions offers a variety of widths.
@erolfox
3 жыл бұрын
@ulticarbon Why the two layers with raw side facing inward (backing on outside)?
@ULTICARBON
3 жыл бұрын
Two layers to provide enough thickness since this would be sanded after cure, and backing outward for easier handling during application.
@erolfox
3 жыл бұрын
@@ULTICARBON so, same look on both side once epoxy is applied?
@shaendta23
3 жыл бұрын
do you sell these sheets already infused with resin? like the end product of the video~
@ULTICARBON
3 жыл бұрын
Currently this is only available as a dry fabric.
@nonono531
3 жыл бұрын
Beautiful!
@garthbanton4236
3 жыл бұрын
Do I have to remove oem leather or could I reshape with UP foam or bondo to reshape and skin over leather
@kafibertv
3 жыл бұрын
kzitem.info/news/bejne/yGaYs2psf4ZpZpw
@BobBob-zi5mi
3 жыл бұрын
Title should be how not to skin a steering wheel.
@fitchyyboi
Жыл бұрын
why
@Fastskiguy
3 жыл бұрын
How did you trim the edges so straight and smooth?
@ULTICARBON
3 жыл бұрын
Wet saw with a diamond blade then a belt sander and fine grit block sanding to further refine.
Пікірлер