I'd like to hear what your exhaust sounds like, but I can't cuz of the music. Noice runner though
@tv4184
25 күн бұрын
I knew I recognized ur handle. I always loved ur builds I came across ur video bc I was planning to come back to the 3rd gen game after leaving it a while back…. Great footage just like ur pics
@addisonrickaby4993
25 күн бұрын
Haha heyo! Thanks for checking out the video. I need to start putting more content out there. I actually sold the truck in the video ... and bought another 3rd gen! Prepping it for the Rubicon as we speak ;) It's hard to get away from this chassis, it just feels right and does so many things well.
@tv4184
25 күн бұрын
@@addisonrickaby4993 haha i was just on ur build page last night. If I go through with it. Itll be my third 3rd gen
@clearminddrone3532
6 ай бұрын
Where you get your bumper ls from nice 4runner
@jvogler_art4708
Жыл бұрын
I slapped a magnaflow performance series muffler on mine that fit my truck, and it's weird. I hit this loud frequency drone at 65 mph but at 70-75mph it goes away. 65 is my normal cruising speed so i'm really reconsidering this muffler.
@shrimpbagels5709
Жыл бұрын
Ahhh the ebrake light love to see it
@Ash-hn9rm
Жыл бұрын
Thank you for including the product link 🙏🏻
@Joshbrodnan
Жыл бұрын
Has anyone done just the muffler. Does it sound good? Is it to loud? Drone? I’m looking for something not to loud but deeper sound than stock. It’s my daily so I don’t want it to be annoying to other people. Is this a good choice or is there something better I’m looking to just do the muffler.
@saltorres6297
Жыл бұрын
I just cut my muffler and then I cut the end and put it right at the end of my catalytic converter Francine sounds mean
@dakotaschmalz3829
2 жыл бұрын
Hey @addisonrickaby , do you have a 1 year update from your climate? i’m living in the rust belt and wondering how it handled the elements. if it rusts, i’m considering coating the system in high temp enamel if possible.
@addisonrickaby4993
2 жыл бұрын
Mine has held up well, but I will admit - the truck has been in storage and only driven about 2000 summer kms since the video. I am no longer winter driving it due to me wanting to keep the truck rust free. It should be fine considering it’s stainless construction though.
@dakotaschmalz3829
2 жыл бұрын
@@addisonrickaby4993 oh man, thanks so much for the reply and long term review! those are rare on the web for this exhaust in particular. that’s enough to convince me since i plan on doing more undercarriage washes on mine.
@addisonrickaby4993
2 жыл бұрын
@@dakotaschmalz3829 no problem! Hit me up on IG @rickashay24 if you have any more questions. The exhaust has been great - lots of people complain it’s too loud but I honestly think if it were much quieter, you should stay stock. (Subjective of course) quality is definitely top notch on this thing. Cheers
@hpgdawnpatrol9456
2 жыл бұрын
Any power improvement?
@addisonrickaby4993
2 жыл бұрын
Maybe? I have no objective feedback here as my truck hasn’t gone on a dyno before/after. I’m sure there is more improvement if you have a S/C and other performance mods but I wouldn’t be set out to buy this for power gains on a stock 3.4 (any catback system in general).
@lucasjames2569
2 жыл бұрын
Hell yea love to see the manual. I have a 97 and it’s so much fun to drive.
@luxuriaco.311
2 жыл бұрын
Hey man, awesome truck! May I ask who built your rear bumper ?
@addisonrickaby4993
2 жыл бұрын
Thanks! I’ve been meaning to make a walk-around video too. It’ll happen eventually ;) I built the rear bumper but it’s a WIY (weld-it-yourself) kit by a company called Eimkeith.
@Lakiose
2 жыл бұрын
Why the music the whole time I’m trying to hear the exhaust?
@pgplayer
2 жыл бұрын
As a fellow XAV-100AX owner, for all its bugs, it is almost like it was custom designed for our headunit openings. I hope they make an updated one with that same exact shape. Oh and nice exhaust!
@addisonrickaby4993
2 жыл бұрын
Lol, i literally got the Sony because of how "OEM+" it looked in the dash. Although it could have a capacitive screen and be more modern, I've been pretty happy with the HU.
@AntonioClaudioMichael
2 жыл бұрын
Nice video
@gewglesux
3 жыл бұрын
I think this sounds better than the Borla
@wade5412
3 жыл бұрын
Can you give a link for that nice bumper? Love the runner! Wish I could've found a stick. Had to settle for an auto. 🙄
@Ashoud_Anobetah
3 жыл бұрын
Nice install, not sure if its the Mic, but the drone seems a bit more with the new one. still got the stock on one on mines,
@TLCurd
3 жыл бұрын
So did you install the “full” system, as in the u-pipe assembly and NDT Chamber? Just received mine for the 3rd gen Tacomas and there are no install videos up yet. I was unaware that there were 3 different options for install for moderate to most aggressive sound. So I’m trying to decipher what set up I’m hearing on the videos for their other overland vehicle setups. Thanks in advance for any info. Sick rig as well!
@addisonrickaby4993
3 жыл бұрын
There is only two options on this exhaust - with the NDT chamber and without. As you can see in the video, I did install the NDT chamber for the most moderate sound. I bet it will sound pretty good on the 3G Taco!
@TLCurd
3 жыл бұрын
@@addisonrickaby4993 well I’d be lying if I didn’t say I feel like a dumbass for asking now, I must have looked away at literally the exact moments the text was onscreen along with the shots of the install at the beginning. Yikes! 🤦🏻♂️ anyhow, thanks for the response and again - wicked awesome rig! 👊🏽
@K_man217
3 жыл бұрын
I put this on my Automatic 2000 Sr5, replacing rotted out quiet flow. It is excellent, has a cool note without being too loud, and can have a normal speaking level conversation on the highway even with the back window open. Totally worth the money, and they throw in some nice swag in the kit. My kit also included the rear cat delete pipe, which I didn't use because mine is a california spec, and I was replacing the cats as well. Thank you for this video, I would not have thought to try this, and I love it
@josephtube24
3 жыл бұрын
Is the optional resonator part of the kit?
@addisonrickaby4993
3 жыл бұрын
Yes it is
@josephtube24
3 жыл бұрын
@@addisonrickaby4993 you are awesome, thank you confirming! I was looking at the link you provided and wasnt sure if I needed to find another seperate part number for the resonator. Thanks again Addison 🙏🏼
@K_man217
3 жыл бұрын
It is, and it also includes a delete cap and all the nessecary clamps and gaskets.
@josephtube24
3 жыл бұрын
@@K_man217 got it and thank you for sharing 👍🏼
@soothingmeow22
3 жыл бұрын
Just when I thought I'm almost done with my rig I see this 😅
@JosephJoJoFlores
2 жыл бұрын
Whats your rig look like?
@omeeddorroudi2026
3 жыл бұрын
Very clean set up. I enjoyed the demo/video. Definitely helpful. Gotta ask. Where did you get the Bibendum prayer hands air freshener?
@addisonrickaby4993
3 жыл бұрын
Thanks! Haha that’s funny you noticed the air freshener. I got it from the cool dudes over at @ilbdriversclub
@omeeddorroudi2026
3 жыл бұрын
@@addisonrickaby4993 Right on. Thanks man!
@kevcastah5796
3 жыл бұрын
Your lift setup? Sick rig btw
@addisonrickaby4993
3 жыл бұрын
That’s complicated... lol I’ve got lots of mods to the truck currently in the works. As soon as they are done I’m going to throw up walk-around sorta video. Stay tuned! Thanks for the kind words
@josephtube24
3 жыл бұрын
Did your gas mileage change?
@addisonrickaby4993
3 жыл бұрын
Highly doubt it but I haven’t tracked fuel economy in a long long time! I run 35” tires most of the year (this is my winter setup in the video) and it’s just always bad on gas. Lol
@josephtube24
3 жыл бұрын
@@addisonrickaby4993 aww gotcha. Almost forgot about them 35s, that’ll make a difference! Thanks for the get back either way 👍🏼
@1970HondaCL100
3 жыл бұрын
Great video man; I've probably watched it two dozen times while waiting on my own exhaust to ship. They definitely underestimated the demand for these because there's still ~ a month wait even if you order directly from Magnaflow.
@krevercarpiso8434
3 жыл бұрын
where did you get your radio from?
@addisonrickaby4993
3 жыл бұрын
It’s a Sony XAV-AX100, I think I got it from Crutchfield
@alexgarza5398
3 жыл бұрын
does a cat back improve performance? in my case I have a 2wd 1996 Sr3 4 cylinder. is it dumb if i were to even think about getting one?
@addisonrickaby4993
3 жыл бұрын
It will improve performance but I cannot say by how much. I have not really noticed (or expected) a real performance gain from this although I’m sure I’ve picked up a couple HP
@Blakely901
3 жыл бұрын
What state and road is most of this shot on?
@addisonrickaby4993
3 жыл бұрын
The Province of British Columbia, in a far away land called Canada ;) (I’m about 3 hours north of Spokane WA)
@Blakely901
3 жыл бұрын
@@addisonrickaby4993 Dang LOL thought this was in the US. Thanks for the reply man and beautiful work on the vid
@Sam-pu7nz
3 жыл бұрын
@@addisonrickaby4993 Isn’t Nelson good lol 😂
@LOYLSkipSh0t
3 жыл бұрын
great video and nice runner! would love to see some more!
@lazibuilt
3 жыл бұрын
Bro I’m more impressed on your camera placement. Did you have a tripod in the back seat?
@addisonrickaby4993
3 жыл бұрын
You nailed it!
@CarlosReyes-tv8jy
3 жыл бұрын
Does this affect the oxygen sensors in anyway? Will I have to replace them for this new set up?
@addisonrickaby4993
3 жыл бұрын
You’ll have to remove your factory rearward 02 sensor (as it’s installed in the part of the exhaust that you will be replacing) and install it in the new Magnaflow exhaust. But nothing there is modified, and your factory sensors will work just fine. No issues or codes whatsoever.
@matthewbaumann793
3 жыл бұрын
“0-60..... yes” 🤣 my feelings as well in my 99’. Sounds great! Would it be quiet enough at low RPMs (idle-2000ish) crawling for hunting, or is it substantially louder at low RPMs?
@addisonrickaby4993
3 жыл бұрын
It is a little louder in the lower RPMs. The no drone zone is somewhere around 2300-2600RPMs if I remember correctly.
@coltonweatherford8338
3 жыл бұрын
Did you notice any change/increase in performance?
@addisonrickaby4993
3 жыл бұрын
I would think there is a mild increase but honestly nothing really worth getting excited over. Maybe if the truck was Turbo'd or S/C'd then there would be more of an increase? But as a stock slow AF truck? Meh.
@K_man217
3 жыл бұрын
I wouldn't consider this a power increase, but gives you better clearance, and decent sound. I didn't notice a power increase over a quiet flow when I installed this, but a much nicer sound.
@danielsaenz9335
3 жыл бұрын
Which rear bumper did you go with ? Looks great !
@addisonrickaby4993
3 жыл бұрын
Thanks! It's an Eimkieth rear bumper. IMO the nicest/tightest/cleanest bumper out there for these trucks. It even uses the factory "TOYOTA" running board cover as the top plate.
@coltin8801
3 жыл бұрын
Awesome video and 4Runner! I definitely want to get this exhaust someday.
@MrMakaJames
3 жыл бұрын
Damn cracked my exhaust last year and not sure if repair is worth it knowing the rust of a stock 98 piping would be like. Looking too buying one of these after I get new suspension kit.
@ianlloyd4301
3 жыл бұрын
I just put a magnaow muffler and I think it sounds great . I don’t know about a full exhaust don’t really need all that . If you are looking for a little something I would just do muffler
@addisonrickaby4993
3 жыл бұрын
Lots more to this exhaust than just the muffler. You actually get to replace the 20 year old exhaust piping too, which is often broken and/or corroded on vehicles of this age. Not to mention it’s been designed to be an “Offroad” exhaust so it’s tucked up higher in the frame rails and doesn’t have a massive, low hanging, exhaust tip out the rear or side. Those are key areas to purchase this exhaust over a muffler if you use your truck for 4WD purposes. If you just want sound and don’t care about the rest - you can definitely just do a muffler. Cheers
@lazroo
3 жыл бұрын
@@addisonrickaby4993 I actually spoke to magnaflow , wish they would sell this muffler with the resonator built in as a separate buy from the whole exhaust but they don't , anyways they did provide me the part #s to pretty much make it from scratch lol
@addisonrickaby4993
3 жыл бұрын
@@lazroo oh that’s interesting! Kinda makes sense I guess... glad you got the part numbers to get you going!
@lazroo
3 жыл бұрын
@@addisonrickaby4993 did you have a stock muffler before this ? I had a magnaflow one time on my 3rd gen I took it off two days later the drone was terrible man .
@addisonrickaby4993
3 жыл бұрын
@@lazroo I have ran Magnaflow mufflers in the past, but the muffler that I removed on this truck was a stock muffler. That’s why there is value in buying a full system, rather than just a muffler, as it has been engineered to reduce drone. But I will say if your expectation is to have a dead-silent exhaust, then buy a stock replacement and not a “performance muffler”. If you watch my full video you can hear the exhaust at highway cruising speed and you can tell that Magnaflow engineered it to have a quiet profile in that cruising rpm range for these engines/4Runners.
@glennferrer6349
3 жыл бұрын
Clean rig. Love the 4Runners especially the 3rd Gens
@addisonrickaby4993
3 жыл бұрын
They are the next “classic”. Timeless design in my opinion.
@glennferrer6349
3 жыл бұрын
@@addisonrickaby4993 Totally agree. I myself have a 2001 4runner. I was in the fences between a Borla or Magnaflow exhaust .... but after watching your video. Magnaflow it is 😎
@addisonrickaby4993
3 жыл бұрын
@@glennferrer6349 Nice! 99+ for the win. Borla makes a good protect as well but I don’t think you can go wrong with this new Magnaflow exhaust. I honestly like it more every time I drive the old truck!
@lazroo
3 жыл бұрын
Hey man , sweet video, lighting is on point , what do you use for your camera to have it steady ? I assume dslr or mirrorless ?
@addisonrickaby4993
3 жыл бұрын
Hey thanks for that! My brother and I actually own a media and content house so we shoot a LOT of video. I think I was using our Canon 1DX mkii for this with a tripod (driving shots) and otherwise it was basically all handheld with the exception of the intro shot, which was on a DJI Ronin.
@mikepao6109
3 жыл бұрын
Time to change that clutch pedal spring buddy, nonetheless truck sounds good.
@addisonrickaby4993
3 жыл бұрын
I was waiting for someone to catch that! Lol Already done.
@pgplayer
2 жыл бұрын
I didn’t even notice until I read this. Guess I need to change mine too 😂
@forhiscozacts5419
3 жыл бұрын
i’ve ordered this from Magnaflow at the start of this year & the estimated ship date has been moved back twice 😫 thanks for this vid! it sounds very nice all around!
@addisonrickaby4993
3 жыл бұрын
Bummer! From what I heard, the demand has been greater than they expected. Hopefully you get it soon!
@finbarrk3
3 жыл бұрын
Yo you should do a walkaround video of your rig. Super clean, nice work!
@addisonrickaby4993
3 жыл бұрын
Thanks for that! Not a bad idea.... I’ll throw something together when the weather starts to get a little nicer. I’ve got new wheels/tires/and bumper coming soon so it is going to change a fair bit in the next few months!
@pjp1288
3 жыл бұрын
@@addisonrickaby4993 Great video. Do you have any footage of your past builds as well? I'm sure they would be popular. Would be super inspiring to many.
@addisonrickaby4993
3 жыл бұрын
@@pjp1288 thanks for the kind words! Unfortunately I don’t have footage from all my old builds. Just photos buried in the forums ;). I do plan on doing more videos like this around the 3rd gen though, so stay tuned for those! Thanks
@davidzoyoquila941
3 жыл бұрын
How many inches is that muffler itself???
@addisonrickaby4993
3 жыл бұрын
Honestly not sure. Might say on the magnaflow website?
@RechroDude87
3 жыл бұрын
It's a 5x8x18 with custom internals
@Spaceberries12
3 жыл бұрын
Any plans on building a custom rear tire carrier/swing out? If so, I’d love to see the video!
@addisonrickaby4993
3 жыл бұрын
No plans for a rear at this point. I think there are some really good options out there already for the rear. Check out @eimkeith as he is about to drop a bolt-on (ie. removable) swing out for the bumper currently on my truck. Super excited for it.
@greghinchman7610
3 жыл бұрын
Slick rig, man. I'm shopping for new protective equipment for mine right now. What bumpers and rock sliders are you running?
@addisonrickaby4993
3 жыл бұрын
Thanks! What year is yours? I’m currently running Coastal Offroad high clearance front bumper and sliders. Rear bumper is from Eimkeith. We are currently in prototype phase of testing for our own front bumper design as well... which should drop pretty soon! Check @tamarack.plus on IG for deets.
@greghinchman7610
3 жыл бұрын
@@addisonrickaby4993 I'm running a locked 97, with an OME 3" lift and 4.88s for now! Helluva beast on the trails!
@addisonrickaby4993
3 жыл бұрын
@@greghinchman7610 nice! Gears and a locker go so far with these trucks. Keep it simple, it’s the best way!
Пікірлер