where was the 8 degree surface made? the cleaver can only cut a straight surface
@AhmadouABAL
2 жыл бұрын
-15dbm faible valeur
@psixojohn6367
2 жыл бұрын
Is there a better reason using this termination rather than fusion splicing with the pigtail?
@zetor2K
25 күн бұрын
Sure. It is way cheaper than splicing. Also, you do not need to carry a fusion splicer, do not need "labor", just 2 hands, and a small thinking head. If you need to install a termination in an end user's home, it is faster and more fool-proof solution than splicing. A fistful of quick connector costs about 50-70USD (100 pcs), and they reusable connectors, so you can tinkering :)
@ashansisidu9533
2 жыл бұрын
Thank ❤
@SkillsBattles
2 жыл бұрын
👋👍
@SkillsBattles
2 жыл бұрын
good job
@iraliamariaherices5100
2 жыл бұрын
Esa mierda es mal echo marca -15.00 db eso tiene que quedar menos de -10.00 db
@udayasirinayake4863
3 жыл бұрын
What is the song name?
@shinigami2669
3 жыл бұрын
how to uninstall the protective cap?
@gliceriobelusojr7484
3 жыл бұрын
Is the used SC/APC can be reused several times? I understand that there's an optical gel inside it, will it affect its performance over time?
@3mariusx
Жыл бұрын
Yes it can be reused
@jesselynde393
3 жыл бұрын
7db is too much loss!
@salat
2 жыл бұрын
True, but maybe you should learn to read an instrument: It shows -14.6d0Bm = 34.69µW first and with the cable -15.39 dBm = 28.91µW - that's 0.79dB loss..
@3mariusx
Жыл бұрын
@@salat how did you calculate that? 🤔
@btudrus
Жыл бұрын
@@3mariusx C=A-B ? 🤣🤣🤣
@3mariusx
Жыл бұрын
@@btudrus and what C B and A represent? 🙄
@OT-tn7ci
Жыл бұрын
@@btudrus still waiting for an explanation
@vcsskhi-fiaquariumfishes
3 жыл бұрын
How I purchase this connector
@rahulwaghmare6370
3 жыл бұрын
7db lose
@salat
2 жыл бұрын
You should learn to read an instrument: It shows -14.6d0Bm = 34.69µW first and with the cable -15.39 dBm = 28.91µW - that's 0.79dB loss..
@OT-tn7ci
Жыл бұрын
@@salat again, how ?
@hilariorosario9048
3 жыл бұрын
I'm also work from telecom Very simple for that fiber optical connector
@jlacika19
3 жыл бұрын
Hi there! I'm also a Telecom Technician from Hungary. And you? I work with optical fibers. My apc connectors not always but very often break the fiber after a few hours. So this is how I got here :D maybe that's me who's doing something in the wrong way. But I don't think so. My fibrlocks and the splices I do with fusion splicer never go wrong.. I have no idea what's going on :D
@hilariorosario9048
3 жыл бұрын
Very simple
@hilariorosario9048
3 жыл бұрын
Very simple
@wjimenezu
3 жыл бұрын
Love the song :-)
@iridoceleperistalsis3790
3 жыл бұрын
sometimes my sc connector doesn't work properly. And my wifi operator told me to spray on the front side of sc connector from any cleaner and reconnect it. This trick works but I didn't find anything on internet is it safe???
@nikhilkolhar8237
3 жыл бұрын
Ya bro it's safe but after spraying you should blow some air to it so that dust can move from the edge
@zetor2K
25 күн бұрын
If you need cleaning an optical termination like this, and you wish a reliable solution, look for Reichle And DeMassari. It is not cheap, but works good, and very simple to use.
@moreforme74
4 жыл бұрын
That's the most troublesome mechanical connector I've ever seen.
@zhangzhenshi1281
4 жыл бұрын
Haven't used it, there is no need to say my product
Пікірлер