What is this phuckin idiot rambling about, get on with the phuckin video. Enough with the updates you only have 6000 subs the phuck you tralking about
@fishtuationaqua
11 күн бұрын
Thanks for the tour. This is the shape of the camper I want to start building this month. I plan to fiberglass and several coatings of paint. I like the simplicity of your build. The PVC water tank is a great idea. Where did you buy the black aluminum trim around your camper?
@nickforster2496
9 күн бұрын
It was all bare aluminum that I painted black. You can get most of the right angle trim at home centers or metal suppliers. The two pieces in the front angled roof portion I ordered online, I searched for 135* aluminum
@greedyg76
2 ай бұрын
how did you do the 45* exterior trim on the front near the solar panel ? That is where I am stuck on my trim, can't find a 45 and didn't want to do 2 flat pieces.
@nickforster2496
2 ай бұрын
I managed to find a 135* trim piece from a supplier online. I may have been out water industries but if you search 135 degree aluminum trim it should come up for you
@xchangr
3 ай бұрын
Nice
@lowlifechris5833
4 ай бұрын
Best one built so far.
@j88-e7q
4 ай бұрын
I have the same reading lights. If you keep your finger on it, it dims.
@minutemenapparel
5 ай бұрын
What did you use for the walls? FRP Panels?
@nickforster2496
5 ай бұрын
I sprayed raptor liner over wood. If I did it again I’d maybe use aluminum panels, they are just hard to get.
@minutemenapparel
5 ай бұрын
@@nickforster2496 ah gotcha. I was considering using frp panels but I’ve found ACM panels in stock here in Salt Lake.
@nickforster2496
5 ай бұрын
@minutemenapparel1539 the main issue with frp panels is they are made for exterior use and don’t have anything to prevent UV from deteriorating them. You could possible coat them with an exterior paint or something
@minutemenapparel
5 ай бұрын
@@nickforster2496 right, was considering using Raptor liner as the coat, since it’s already textured.
@SmokyMountainBlessed
6 ай бұрын
you did a great job on your build and showing the mistakes on the exterior finish help others know what to do to avoid that so that is a great benefit
@yourpcmd
6 ай бұрын
Whats the tongue weight and the total weight of the square drop?
@nickforster2496
6 ай бұрын
Total is about 1500 but I haven’t weight the tongue. It’s definitely light enough to pick up and move around fairly easily but well balanced so it tows very nicely without any sway
@yourpcmd
6 ай бұрын
@@nickforster2496 Thanks for that info. I'm planning on building one and wanted to make sure it would be light enough for my wife's CRV to tow since it's rated at 1600 lbs.
@chrishad95
6 ай бұрын
Good job I watched the whole video. I was able to catch the measurements on your sketch. I like the simple design, I will probably make something similar with pallet stringers then think about walling it in to make a cabinet. I hate wasted space under my tool stands. I would recommend learning to edit video for audio, that music in fast forward was horrible. I like the content but was looking for the mute button.
@amyflores18
7 ай бұрын
can you do a design for a 6x10 trailer frame build
@nickewing8194
8 ай бұрын
Hey bro epic build but want to give you a heads up your side widows are backwards the wind can force water through the seal mid window
@samg.6751
9 ай бұрын
Really amazing job, it looks insane. It's very inspiring and I'm thinking about doing a similar build. Could you explain how you mountaind the plywood walls on the squar tube frame? Did you weld some metal brackets on the frame in order to srcrew the plywood in? Thanks :)
@airbrushken5339
10 ай бұрын
I've been asked about 12 Volt compressors to use inflating paddle board, air mattress and charging my hot water tank on the top side for showers. Sadly most people have NO IDEA what is the best for the price and powerful enough. As a professional airbrush artist since the 60's ... I have made a portable 12 volt spray make-up for Disney and FOX make-up artist and also for temporary tattoos, with the oldest being 4 years old... I have one in my tear drop. Sparmax makes a single cylinder 12 volt pump ... Iwata makes one, but they are actually made by "Sparmax" Corporation for them and for that extra 100 bucks you get an "Iwata" Sticker .... your choice... The only thing I did for the tattoos and makeup was a foot switch for a tattoo artist.
@ajnhaswell
Жыл бұрын
Do you know the weight?
@nickforster2496
Жыл бұрын
I believe it’s about 1800
@pathslesstrampled9906
Жыл бұрын
You want to remove a sticker? Go get some Bestine. That stuff will remove any sticker.
@branorataj7194
Жыл бұрын
your exterior finish looks really good. did you just sand and painted the plywood? could you elaborate more on how you did it? thanks
@nickforster2496
Жыл бұрын
I used a pray on bed liner over plywood. I skipped a very important step that I would 100% recommend which is to fiberglass the plywood first.
@slimsteve7
9 ай бұрын
@@nickforster2496Could you get away with just fiberglassing the seams?
@chrisholliday1330
Жыл бұрын
What are the dimensions height, width, length.
@marvinmcgill
Жыл бұрын
how long is the trailer
@GeorgiaRidgerunner
Жыл бұрын
these are my problems with mini square drop campers theyre to small for two people to be comfortable the doors are tiny my fiance and myself are both over average height and in our 40's crawling in and out one of those would be so uncomfortable lastly the aero dynamics of those things is that of a brick people never talk about the increased fuel consumption due to wind resistance people only want to talk about how lightweight those campers are im glad i realised all these things before i built one edited:to insert omitted word
@AriePharmD
Жыл бұрын
@Nick Forster Excellent build. Any guess on the cost to build?
@nickforster2496
Жыл бұрын
I didn’t keep very good track but I would guess with everything including the steel for the frame I’m probably into it about 5k at most
@GuyNusbaum
Жыл бұрын
nice job but no good to me without measurements this is not a channel i will subscribe to i like measurements
@graystone3048
Жыл бұрын
What are the dimensions of the box itself without the tongue?
@nickforster2496
Жыл бұрын
4 tall, 5 wide, and 9 long. Not including the storage box on the front
@stevenschmouder1285
Жыл бұрын
What did you use for the trim around the outside edges?
@nickforster2496
Жыл бұрын
It’s all aluminum angle trim that I painted black
@cruiez2008
Жыл бұрын
Great Design
@miguelangel0625
Жыл бұрын
can you link the website for the custom back galley door? thanks!
@lonnietaylor2759
Жыл бұрын
Due to the queen size bed being a bit too big ,wouldn't a full size bed better, with more room to move around.🤔
@nickforster2496
Жыл бұрын
We have two dogs so we wanted a larger bed inside we so we could all sleep comfortably
@JaimeFriasJr
Жыл бұрын
For the license plates. Did you register the trailer as a utility or camper/tv?
@nickforster2496
Жыл бұрын
Yes I had to take it in to get inspected and licensed
@mattmatthiessen7743
Жыл бұрын
Nice man...similar to my design. Is that galley hatch prefabbed? If so...do you have sizing you can share? Perhaps a link? Thanks
@nickforster2496
Жыл бұрын
It was actually a custom order from challenger door. You can call them and tell them what size you need and what color etc and they will give you a price. I wasn’t able to find anything prefabbed in that size range
@koltongoebel
Жыл бұрын
@@nickforster2496do you remember your Dementions?
@nickforster2496
Жыл бұрын
@@koltongoebel it was 4ft tall, 5ft wide, and about 10ft long (just the box)
@koltongoebel
Жыл бұрын
@@nickforster2496 sweet! What about your back door size?
@nickforster2496
Жыл бұрын
@@koltongoebel I believe it’s about 3ft tall and 4ft wide. It was a custom order from challenger door, it ended up being about 400 after shipping
@dronesinconstruction
Жыл бұрын
Starting a teardrop build and Here I am
@danielvaldovino803
Жыл бұрын
Great trailer design! I’m looking to build the same as yours ! Is there a way you could share the tips or how the process works?
@nickforster2496
Жыл бұрын
It really wasn’t too bad but it did take a lot longer then I expected. If you have a garage or shop to build inside it definitely makes it easier. I had to build in my driveway so getting anything done in the winter was impossible
@blueridgecustoms
Жыл бұрын
I was wondering what your dimensions are? Looks great
@aarondavidson4195
Жыл бұрын
Nice trailer build ,
@Xemis5
Жыл бұрын
Great looking squaredrop! Terrific build!!
@energyideas
2 жыл бұрын
you've done a great job on the trailer congratulations. very good video thank you. anyone looking for where he got the gear look at the description.
@masterninja2291
2 жыл бұрын
One awesome trailer! Do you mind sharing where you got the rear door from?
@nickforster2496
2 жыл бұрын
The rear door came from challenger door. It was a custom order and ended up being about 400 after shipping. You get to choose the color and door latch style and how much it opens which is nice. They do have some standard none custom sizes too I believe.
@masterninja2291
2 жыл бұрын
@@nickforster2496 thanks man 😁 now i need to find a EU distributor 😀
@lesliefontenelle7224
2 жыл бұрын
Great technique. I like the approach you took. The stand came out very well. I'm gonna building one myself. You rock 😎
@lukaszskwara2848
2 жыл бұрын
Any updates on the trailer build.
@nickforster2496
2 жыл бұрын
I will be uploading a new video in the next week or so!
@Mikeywatches
2 жыл бұрын
You cant just leave us hanging like this! Did you ever complete it? If you did and never did any more vid during the build then give us a walk around of the completed trailer and a review of it. If you have not completed it get back on it we wanna see it.
@nickforster2496
2 жыл бұрын
The trailer is complete and I plan to do an overview video this week. Thanks for the interest after all this time!
@MrGronito
2 жыл бұрын
Excelente amigo , gracias por compartir.. saludos desde Santiago de Chile
@hssalvador
2 жыл бұрын
Did you finished it?
@nickforster2496
2 жыл бұрын
I will be uploading a new video this week!
@hssalvador
2 жыл бұрын
@@nickforster2496 Waiting here :)
@jsmith4407
2 жыл бұрын
Looks like it's been a little while since your last trailer video, wondering if we're gonna see anything soon? I do enjoy your videos
@nickforster2496
2 жыл бұрын
Very soon!
@Cmonman441
2 жыл бұрын
Nick did you ever finish the camper?
@beardedprepper8606
2 жыл бұрын
He posted this video around 1 year ago and he has posted no videos of any type after he posted this one! I wonder what happened to him and if he's OK!
@Buzzsteele
3 жыл бұрын
So no follow up videos? Thanks for the TEASE
@luisfortanel9618
3 жыл бұрын
Can you please send me the layour file so i can build mine please
@nz4057
3 жыл бұрын
Episode3 cuzzie
@giovannialice0921
3 жыл бұрын
What size that campervan.?
@neilmarshall4927
3 жыл бұрын
Yo, man. Where'd you go? I need to see the rest, man
@tkwade79
3 жыл бұрын
Great videos. How long did you make the tongue?
@nickforster2496
2 жыл бұрын
I believe the total tongue length was around 5ft (including the storage box on the front of the trailer)
Пікірлер