I have the same camera, bouight it used. The only thing wrong with it is the focusing ring was loose and not connected. I tried the 3 set nuts or bolts that are on the focusing and I make it too tight or too loose. How can I adjust it?
@tammaq
Жыл бұрын
Would I be able to send it to you to adjust the focusing ring?
@solosan11
2 ай бұрын
Hey did you make it? I have the same issue
@infernosxe
Ай бұрын
@@solosan11 same question to you :)
@hwntwww
2 жыл бұрын
take your time, dont rush
@casarossafilm9287
3 жыл бұрын
mine rangefinder just decided to disconnect itself from the focusing ring, so when I focus the diamond doesn't move at all. Could anyone please help me ?
@pkeiths1594
3 жыл бұрын
I cleaned my yashica Lyxx 14 finder, the yellow coated semi translucent mirrored 45 degree glass lost its coating so the range finder is useless as there is no yellow patch. It was very dim to begin with but i kinda finshed it off :-(. I only used some Zeiss Lens cleaner. I look in an old canonet 28 to see if I could swap the coated semi translucent mirror but its about 3mm shorter in the Canon. So i wouldn't touch the coated glass (45 degree glass) maybe give it a brush with a flat sable brush and thats it.
@behiyeerdemir
3 жыл бұрын
Hi, i have Yashica Electro 35. Is there a way ti disamble the lens?
@Taronlusin
4 жыл бұрын
Thank you, your video helped me to calibrate rangefinder on my Yashica 35.
@danielbdbe
4 жыл бұрын
hello could you please let us know where to buy foams kit for light seals and pad ? ebay ? which seller please ? thanks for help .
@JEROENHAHAHA
4 жыл бұрын
The "OVER" light on my Yashica GTN never comes on... Do you know what's wrong with it?
@Freshasfcuk
5 жыл бұрын
Hi.. Nice video there.. Thanks for the tutorial.. If you can made another video of how to replace the new foam inside the camera nearby the viewfinder.. I found out my camera has leak from the front :(
@ihmintz
3 жыл бұрын
Did you find a solution, friend? I have the same issue I think
@Jayysam95
5 жыл бұрын
Could I clean the VF while film is inside? Not too familiar with film cameras.
@japanvintagecamera8869
4 жыл бұрын
Yes, you can.
@papa_naura
5 жыл бұрын
Thank bro
@themoolag
5 жыл бұрын
Does cleaning the diagonal glasses not misalign them?
@akshayd211
5 жыл бұрын
Robert you are a godsend.
@adriangarciacastanedo5161
5 жыл бұрын
Hi, I have a yashica Electro 35 Gsn impeccable state, but I need a cleaning and an arrangement in the obturado. You fix this type of camera? Could you help me with this? Thanks for your time. Thank you for sharing this knowledge on your channel.
@TheRetroFuture
6 жыл бұрын
Brilliant video man!
@robertgoodman1454
6 жыл бұрын
KZitemr filmismorefun has stated, in his viewfinder cleaning video, that the large diagonal piece of glass in the viewfinder has a special coating and should not be touched. I cleaned this like the rest of the glass and thankfully viewfinder seems totally fine. However, had I known this beforehand, I probably would have avoided cleaning that piece. Here is a link to his video kzitem.info/news/bejne/p4Jptp-kmKKljKg
@filmdigitalvideos
4 жыл бұрын
I have the very first model yashica electro 35 and at first I didn't touch the beam splitter but after cleaning everything else I still had a low contrast patch, so I decided to clean the beam splitter anyway as I had a donor camera if required. Cleaning it with methylated spirits didn't harm it and the patch got a bit brighter (I think). I still ended up placing a small piece of nd flash gel in front of the viewfinder but behind the front cover to increase the contrast, now I can see the rangefinder patch easily. Thanks for making the video, it was very helpful.
Пікірлер