How do you stop the car saying low beam failure? Even though the new bulbs work.
@markjohnson8162
7 ай бұрын
My leak is coming from the hinges area from the door anything common
@brutonuk
7 ай бұрын
I know this is an old video but this was the first video i found. This video helped me as i did not know you could remove the washer fluid funnel and looks like the bumper needs removing so thanks to this video i gained access with notes that the funnel attaches to the fuse box quite tightly. My 2017 insignia has HIR2 bulbs not the H7 bulb. on HIR2 bulbs the t20 torques is not required and the bulb just comes out with a 90 degree turn.
@jaspercandoit
8 ай бұрын
Really helpful video- thank you. I used the Ring doorbell screwdriver and this fitted perfectly.
@bertbox69
9 ай бұрын
This doesn't work like that at all, even when you loosen the screws almost completely, in a lot of cases the bulb STILL won't turn even if you put a lot of pressure on it, it does NOT come OUT, with one quarter turn as easy as that!
@crome-oc3gh
9 ай бұрын
Hello, great video. I opened mine and the small resistor on the right hand side of the motor is missing. Do you know the spec of that resistor?
@drexelspivey6472
Жыл бұрын
thanks so much i didnt know the water bottle spout lifted out ,i was going crazy before watching your video
@cskuk
2 ай бұрын
Same lol
@frasermathieson9767
Жыл бұрын
what's the tank of brown sludge to the right?
@kennys5376
Жыл бұрын
The lamp is not a H7 for 64 plate. It is a H1R2. Make sure you check before buying
@russellping9865
Жыл бұрын
Dude your a genius, never would of thought to remove the washer pipe... cheers
@balazstube
Жыл бұрын
If you send me an email or any other way to comunicate, I can send the picture and explain better what I meant, thank you for the video anyway, it helped me to get so far. 🥵😉
@balazstube
Жыл бұрын
Hey, you showed long time ago how to fix the tailgate lock, I've followed all your instructions but mine is still not working. However, I saw a something interesting in your video, which might be a missing component, you can see that in the picture
@stevesteve7919
Жыл бұрын
Vauxhall turning the most basic of jobs into one needing specialist tools 10/10 for utter stupidity
@roland20002000
Жыл бұрын
Well done vauxhall for maxing the most basic and immidiatly necessary jobs and making it this difficult. Thanks for the video anyway I thought they must just twist out but obviously not, i could have been here all night trying lol
@colinghamilton
Жыл бұрын
0
@milosmarkovic8878
2 жыл бұрын
Thank You man so much!!!
@darrenpacheco6613
2 жыл бұрын
Absolutely no need to remove any torx screws! Just turn the bulb holder attachment with a bit of force
@pob1335
2 жыл бұрын
What an absolute p!ss take why the hell did vauxhall feel the need to screw the bulb into place made the job overly difficult any other car don't even need tools 🤔
@jennylacey2252
2 жыл бұрын
Thank my lucky stars I found this video. Others say remove the bumper or the battery and fuse box to get access. For those saying you don't need to undo the screws, consider it might not be your cars first bulb change....
@MrBongblazer
2 жыл бұрын
Very informative video, did not know that spout popped off like that, thankyou sir
@adrianrawlings3032
3 жыл бұрын
Is it easier to take headlights out
@seanwallace1972
3 жыл бұрын
Been onto eBay no tool listed when you type in search insignia headlamp torc tool
@artanternova2736
3 жыл бұрын
Respekt,,
@biglemonade9354
3 жыл бұрын
Any clue how to fix faulty ajar sensor on boot latch astra h?
@user-cm6tj2he4b
3 жыл бұрын
Thanks. What a pain in the ass. They should h&_ng the engineer who made this up.
@gustavometalgear8986
3 жыл бұрын
It worked on a 62reg as well, nice one
@user-qg3pj5jc7b
3 жыл бұрын
Thanks for your video. With your help I fill my rear 5th door light cantact
@remotaurog
3 жыл бұрын
I have this bulb to change next after I replaced the other bulbs, it is tricky but if you take your time it's possible even with removing screws although no need to as bulb held by spring loaded basket, washer bottle can be removed with help from flat screw driver pushed against locking shoulder
@81Mackey
3 жыл бұрын
Great video thanks. Didnt need the Torx tool thank god
@uxoy9876
4 жыл бұрын
worst video i see on yt
@thehijackster
4 жыл бұрын
Thanks
@johnharris6691
4 жыл бұрын
The designer needs my foot up his !!!! For sure .
@PL-ri3bz
4 жыл бұрын
Good video and to add to the Torx debate, I DID need to loosen the torx a quarter of a turn to help with removal of the bulb holder but more so to refit it correctly and tighten after fitting, I only had to loosen ONE Torx though, I fitted right hand side bulb and the torx I loosened was the one nearest the engine. Hope this helps, I guess it depends on individual cars but there was no way I could turn the bulb holder to refit it without loosening the torx first. Hope this helps someone.
@SGTSnuggles19
4 жыл бұрын
I wish I had read this first, I loosened it and the screw fell out so am now struggling to find the right replacement screw that apparently I do NOT need but also is the only thing to stop my bulb flapping about when i go over a bump....
@dezturner729
4 жыл бұрын
You DO NOT have to undo the hex screws! Just twist and turn gently as it comes straight out of the headlight! My garage done it for me this morning, took less than 5 mins!!
@MyWifeHateCod13
Жыл бұрын
Buddy !! Thanks a lot!!
@fatdan120a
4 жыл бұрын
First car I've owned that had bolts holding a bulb in. Why.. but thx for video.greet help:)
@AlexandroStelian
5 жыл бұрын
Thanks
@ricard458
5 жыл бұрын
very useful information thanls
@catchbill
5 жыл бұрын
Thank you, great information.
@Pakistanmypassion
5 жыл бұрын
Was very helpful thanks
@80andybrown80
5 жыл бұрын
Thanks, did not know the water spout was removable ! Easy
@kallelassinen8640
5 жыл бұрын
we closed the tailgate and pushed the switch , and i think the motor somehow went jammed double locked
@IanBryce
5 жыл бұрын
Fab video this was exactly my issue, you just saved me a few hundred quid before Christmas! Thanks!
@alexorme4351
5 жыл бұрын
what a wet wipe
@JF-xe8cq
5 жыл бұрын
You don't need to remove the screws
@andyhayes67
6 жыл бұрын
wrong
@marnusdeyzel4887
6 жыл бұрын
Thank you very much... Video is very helpful
@MrRichard261
6 жыл бұрын
Really useful video, not removed mine yet, but at least I'm not blind to physical operation of the mechanism, thanks hopefully it'll save me a lot of time.
@MrSudanPresident
5 жыл бұрын
Did it work?
@onrekstinorestes7379
6 жыл бұрын
Hi Mitchell Campion, how do you replace the other one that is behind the wiper's washer tank? On my opel insignia it is blocking the lid of the bulb..
@thehijackster
6 жыл бұрын
I am not sure. I don’t own an Insignia any longer.
@newry123
6 жыл бұрын
nice one
@emanueljmartins
6 жыл бұрын
I would like to add that the information on this video is very relevant for TEKA SW6 60 dishwasher owners since the water softener mechanism and parts look exactly the same. This was a big help for me and I only watched the video because the water splitter was on the main thumbnail image and I recognized it. If the author wants to add this reference to the video description it may help other people out there with TEKA dishwashers. Thank you.
Пікірлер