I had just removed it the brake line is under the number plate
@GunningGod
Ай бұрын
Stock
@Titan_MX_Customs
Ай бұрын
Honda in those years did not care about decibels they scream 😂
@Zamdof
Ай бұрын
the twisted sounds the cleanest and has a pure sound to it.
@Titan_MX_Customs
Ай бұрын
Twisted development does it right for sure
@JacksYTvidos
Ай бұрын
Yoshi exhaust
@Titan_MX_Customs
Ай бұрын
Can’t go wrong with yoshi seems muffled even with out baffles
@katherinediatchenko6461
2 ай бұрын
Amazing vid pook
@Titan_MX_Customs
2 ай бұрын
aw shucks
@John-xf3yu
2 ай бұрын
The culmination of 15 months. Whats next?
@Titan_MX_Customs
2 ай бұрын
Hmm Facebook market place will decide my faith I’m hoping 2stroke
@Jameson_martin
2 ай бұрын
Clean bike
@Titan_MX_Customs
2 ай бұрын
Thank you sir many more to come 🤙🏻
@wewillsurviveone
3 ай бұрын
Says lubricant as you use wd40. That's a classic move. Are you trolling? You have to be trolling.
@Titan_MX_Customs
3 ай бұрын
Does seem tacky doesn’t it, keep in mind it’s just to clean and pick up those micro specs of debris, a much much better option is Seadoo’s XPS anticorrosion lube. Wd40 is all I had on hand, then go back and actually lube with engine oil
@wewillsurviveone
3 ай бұрын
@@Titan_MX_Customs word of advice since you aren't trolling, WD-40 leaves a film that you can't wipe off and it's not a lubricant, the film or WD-40 for that matter. What happens is the film attracts moisture, because for whatever reason, at least I'm my opinion, WD-40 thought that they had so much grab in the market that they could do essentially what drug companies do, cause a condition them sell you the remedy, but I'm this case the condition and remedy are the same can of BS. Do an experiment. Spray it on some really clean metal, wipe it down, let it sit for a day. I bet when you come back the next morning that there's beads of moisture on it but not the surrounding, non treated areas. Now ask yourself? Is it a good idea to introduce that into the engine? If it's a four stroke, now it's all through the oil and everything, two stroke, it's in the crank forever eating the main bearings. First thing I do when I get a can of wd40 is throw that shit in the trash. It won't even work for a door hinge. We all do things that later we look back and cringe at, part of the learning experience we call life
@Titan_MX_Customs
3 ай бұрын
Thank you for the insightful comment I agree with you that wd40 is not cream of the crop. I do hesitate to say that the residue left over from me wiping it clean with a clean rag will contaminate the engine oil In this 4stroke enough to warrant engine failure. But that’s what a break in service is for so I will inspect the oil and if there is clear signs of contamination in the oil I will post and eat my words gladly, I’m definitely curious about this experiment I’ll let you know what I find!
@wewillsurviveone
3 ай бұрын
@@Titan_MX_Customs awesome. I've done it before, not the exact experiment but left it on sometime, came back to moisture puddled on it. And I agree about screw the factory recommended stuff as it's a scam but my best solution would be mineral spirits as it completely evaporates.i mean, if you paint immediately after you wiped a car down in it, it has to be residual free. And it's way cheaper than wd40. It brake cleaner for that matter as it's designed to give a good initial cut for bedding rotors, at least I would think it would do the same for work at setting rings. But if I had the pick for the last wipe before lube on piston install, it would be mineral spirits
@smiley37greg
3 ай бұрын
How would they say it on SouthPark? Dumb, Dumb, Dumb
@Titan_MX_Customs
3 ай бұрын
Precisely
@user-fl7ht4bb9p
4 ай бұрын
Nobody's riding it !!
@grahamcrydd2071
4 ай бұрын
Oh she has more play than an elementary school yard
@jamesmitchell2642
4 ай бұрын
Thing is pieceddddd
@Titan_MX_Customs
4 ай бұрын
Oh beyond pieced
@chroosc8119
4 ай бұрын
Hell Yea
@CreekLurker
4 ай бұрын
It ain't got no gas in it
@mikehatchel8170
4 ай бұрын
Its a Honda!
@user-ip8pb5le5c
5 ай бұрын
No pipe
@Titan_MX_Customs
4 ай бұрын
Oh it’s there just hiding
@VR.cosmic
5 ай бұрын
It won’t start?
@Titan_MX_Customs
5 ай бұрын
Yes! But not what I’m looking for it is a routing issue
@Thomas-vk2lw
5 ай бұрын
Numbers
@Titan_MX_Customs
5 ай бұрын
Oh yeah that will change shortly
@lebrowsky9982
5 ай бұрын
No exhaust
@Titan_MX_Customs
5 ай бұрын
Oh it’s there
@user-ye5wb2pi5f
5 ай бұрын
Snapped front end
@Titan_MX_Customs
5 ай бұрын
I might have to check
@FredPearson-xm6de
5 ай бұрын
It needs a rider
@Titan_MX_Customs
5 ай бұрын
Oh yeah 🤙🏻
@maxxmaxwell7941
5 ай бұрын
Throttle cable should be below the throttle grip.
@Titan_MX_Customs
5 ай бұрын
Close but it has to do with the brakes!
@jamesmitchell2642
5 ай бұрын
Its a Honda, definitely a major issue
@Titan_MX_Customs
5 ай бұрын
Haha I didn’t realize
@THEDCSNIPER
5 ай бұрын
It’s a Honda not a KX450
@Titan_MX_Customs
5 ай бұрын
450 or better
@FixShitEvnTraxxs
5 ай бұрын
Seized the motor!!! Wth
@Titan_MX_Customs
5 ай бұрын
Oh yeah there’s that too
@FixShitEvnTraxxs
5 ай бұрын
It's not being pounded on off road.
@Titan_MX_Customs
5 ай бұрын
It was off-road enough for the engine to lock!🤙🏻
@kortgreen7725
5 ай бұрын
It has no cup holders or an I phone holder! But the main thing wrong with it! It's not chootin dirt outda back of it, hand!
@Titan_MX_Customs
5 ай бұрын
I like the way you think🤙🏻
@camyota
5 ай бұрын
Front brake line is too short...and behind the number plate.
@Titan_MX_Customs
5 ай бұрын
Oh yeah!
@dizzydog4321
5 ай бұрын
Front brake line
@Titan_MX_Customs
5 ай бұрын
Exactly
@katherinediatchenko6461
5 ай бұрын
Very cool slime
@Titan_MX_Customs
5 ай бұрын
Thanks slime!
@EHric23
5 ай бұрын
No, anti seize should never go on threads it changes the torque spec of bolts and will most likely back out
@Titan_MX_Customs
5 ай бұрын
You are correct but this specific bolt is paired with a lock nut to keep it at a specific length along with being pressed against the axle blocks so as long as everything is properly torqued to spec there should be no issue with the chain tensioner bolt
@chrisscoggins9183
6 ай бұрын
Clutch basket 🤦♂️
@Titan_MX_Customs
6 ай бұрын
Good catch! The clutch basket should be replaced or filed down. At the time of disassembly the clutch felt great and I currently can not afford a new clutch basket so in the time being I’m sticking with old reliable. Don’t worry it will be replaced soon!
@grahamcrydd2071
6 ай бұрын
The end😂
@Titan_MX_Customs
6 ай бұрын
My best unpayed employee
@John-xf3yu
6 ай бұрын
A guest appearance!
@Titan_MX_Customs
6 ай бұрын
Oh yeah!
@colecouch5930
6 ай бұрын
This is a banger and I know bangers
@Titan_MX_Customs
6 ай бұрын
Thanks for helping keeping the shop tidy
@grahamcrydd2071
6 ай бұрын
This guy looks like he has a jellyfish launcher in his truck
@Titan_MX_Customs
6 ай бұрын
I can convert your truck to for a couple doubloons
@jamesmitchell2642
6 ай бұрын
*Cooks lunch and sees a new titian video😱
@Titan_MX_Customs
6 ай бұрын
Dude yes enjoy the vid 🤙🏻
@John-xf3yu
6 ай бұрын
Sits in class and sees a new Titan video
@grahamcrydd2071
7 ай бұрын
Finallyyyyy
@Titan_MX_Customs
7 ай бұрын
It’s been a long time more content will be out shortly
@gregoryv.zimansr4031
8 ай бұрын
I am not sure what he is doing but it looks interesting. The maching on these parts is beautiful.
@Titan_MX_Customs
8 ай бұрын
Precision machining to make the engine operate!
@JohnMayo-iq5lj
10 ай бұрын
Does it shrink the metal allowimg for clearance? So you don't t have to worry about damaging them pressing them in ?
@dkillahster
10 ай бұрын
Yes and it makes it easier to install
@Titan_MX_Customs
10 ай бұрын
Yes exactly, the best way is to bake the engine cases to around 250 degrees Fahrenheit that allows the aluminum to expand, combining that with a frozen bearing they should fall in. While installing bearings your main concern is making sure the bearings entry is level with the bearing housing, even if slightly off it can cause the bearing to seize thus damaging the housing. Very good question!
@JonasSinger13
11 ай бұрын
That delivery man is so strong carrying and engine around like it's nothing.
@Titan_MX_Customs
11 ай бұрын
Gotta start hitting the gym man 🤙🏻
@JonasSinger13
11 ай бұрын
@@Titan_MX_Customs do you even lift bro
@Titan_MX_Customs
11 ай бұрын
I need to start lifting more engines haha!
@cosmicfishey347
11 ай бұрын
Men
@Titan_MX_Customs
11 ай бұрын
Men will be men haha
@colecouch5930
11 ай бұрын
Shooweee
@JonasSinger13
11 ай бұрын
Badass.
@Titan_MX_Customs
11 ай бұрын
Thanks man!
@JonasSinger13
11 ай бұрын
Very nice
@chroosc8119
11 ай бұрын
Hell Yea. Looks awesome
@shaneclink9473
11 ай бұрын
definitely like the longer ones but the short ones are good too😂
Пікірлер