Brilliant my jaguar xf was stuck for weeks and this sorted it straight out Thankyou
@TabithaBenjamin-x1i
Ай бұрын
I just wanted to tell you thank you, I did exactly what you taught, and now my car is back on the road. Thank you so much. ❤❤
@phillomax73
2 ай бұрын
This doesn't work , turns but doesn't change any gears .
@g3po389
2 ай бұрын
used this fix today at the side of the road worked great thank you very much
@mrgapp838
3 ай бұрын
Thanks to your video I was able to get car back on road. 1 hour at most to temporarily fix. Thanks!!!!!! Definitely subscribing. 2010 Jaguar xf S/C 5.0 slightly different setup but exact same underneath.
@grungysquash1
3 ай бұрын
Replaced mine, cost $1250 aud very easy to replace in a discovery sport.
@knowledge1873
4 ай бұрын
Thanks a lot! You're genius!
@marraksh1
5 ай бұрын
Hello, good video. What happens if the lifting of the knob is neutralized, remaining always raised , neutralizing the internal mechanical plastic part that blocks the knob? Thank you.
@pauljhlmcnab5468
5 ай бұрын
Sir Gemini auto works😁 that’s your new title. Car stuck for 3 days and fixed it in ten mins thanks to you.
@officecarslz1789
7 ай бұрын
Thanks 🇧🇷🔥
@JennerationX100
8 ай бұрын
If you are in a hurry and dont have time to remove the unit, you can press down foot on the brake, press start and the moment it starts, (its in a neutral mode for a second), press down firmly on the gear selector with two fingers and turn at the same time. You will be able to get in gear and get home. If you want to reverse or put back in park, just press firmly on the selector again and turn at the same time to desired gear.
@Grievance_Studies_Affair_2018
27 күн бұрын
Mine is stuck in D and won't start at all.
@Sunshine_Puma
6 күн бұрын
@@Grievance_Studies_Affair_2018 My discovery is in the same position, gear stuck in D and car won’t start. Were you able to find a fix?
@alexandraava3034
8 ай бұрын
👍👍👌
@daviddick5462
8 ай бұрын
Hi,trying to get my head around this part and its function. I’m assuming that when the rotary dial rises, the shift lock disengages at the same time allowing the dial to move to drive etc so now that the shift lock is held in the unlocked position with the duck-tape, when the car is turned off and the dial lowers, in theory the rotary dial can still be turned because the lock is held open with the tape albeit the dial will be hard to turn because it is flush. So my question is if this is not a part for safety can this work-a-round be permanent ? A new selector is £600 and refurbished selector £300.
@JennerationX100
8 ай бұрын
I did this when I got stuck before. Once I pressed start I immediately firmly press on the selector down and turn it at the same time to move into gear.
@abelardorangel3091
11 ай бұрын
You have done our community a huge favor… you sir are a king!
@landroverclassics5484
11 ай бұрын
Thank you so very much for your help! Mine was stuck in Drive in the middle of the street and I was able to follow your instructions to get it in N and R, and get the vehicle off the street instead of waiting 3-4 hours for a tow truck on a Friday night! Again, many thanks.
@vainohautajarvi1414
11 ай бұрын
Before reinstalling, does the selector need to be lowered back down or is it left in the up position?
@CeebyProductions
Жыл бұрын
⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️ absolutely star! What a video thank you
@marksanchez952
Жыл бұрын
This dude jammz.. Did mine and is truly working... thank u sir
@charleswaynewright2042
Жыл бұрын
Excellent video not a load of bullshit like you get from the camera queens. This vid is all meat 100% Helpful
@valentino3129
Жыл бұрын
Rubber bands work better
@davidbirt9409
Жыл бұрын
How do you fix not being able to select gear permanently please
@r7boatguy
Жыл бұрын
This video was very useful today when my Evoque would not shift out of park. I was able to get it home, where I disassembled the selector. One issue was the plastic piece through which the threaded bar runs to raise and lower the knob was broken into 4 pieces. I 3D printed a new one, but that didn't fix the shift problem. That turned out to be no voltage to the solenoid, caused by one of the pair of 1 ohm senses resistors going bad. They are by the 3 pin connector on the board. I found another one on a scrap PCB, replaced it and now the selector works fine.
@karisstowers3516
Жыл бұрын
Did you do diagnostics? what error code came up? my car Disco Sport L550 SE has gear box fault, parking brake fault, can't get it into gear had to be towed, they think fault wiring harness, but others say possible a transducer or resistorrr.
@mamouroukeita4534
10 ай бұрын
@@karisstowers3516 this sounds like a parking eBrake harness. I have the same issue with my evoque. I changed the read harness. Problem fixed. I Hope this is helpful.
@enyasskincare4349
Жыл бұрын
Hi great temporary fix but not the sort of job you can do at roadside TBF especially on a L405 Range Rover its NOT easy to remove and takes a few hours
@josesifuentes2592
Жыл бұрын
15 minutes tops
@prinshu
Жыл бұрын
Saved me. Thanks
@dexmcluskey4832
Жыл бұрын
Thanks man. I just did this this morning in Colorado and it got my wife’s Disco home. Appreciate it.
@Rskdevelopments
Жыл бұрын
I had one the other day different problem. The black prong had snapped on the bottom of the selector making the car immobilized. I got it going temporary. New one is 3k nzd ex UK
@sureshpatil4028
Жыл бұрын
Thanks for the video it will help me to fix
@danhughes1342
Жыл бұрын
You absolute legend, the 1200€ I would have had to spend was one thing but I’d had had to have waited for 30 days to get the part here! 🙏🫶🏼
@umarshafi4552
Жыл бұрын
Do new units needs coding ??
@BanHaNatanel
Жыл бұрын
Do a video on how to remove the gear shift module
@marksanchez952
Жыл бұрын
There is a video... I used it
@TheRussBroom
Жыл бұрын
I used an elastic band, but yeah 👍
@wolverine1981pl
Жыл бұрын
does this happens to all models of jaguar or newer models dont have that problem? im thinking about getting xf 2016
@BigRobz1
Жыл бұрын
It just happened to my XF 2016
@JoeDirt00
Жыл бұрын
My 2017 XF S just samething just happens stuck in drive with the rotary in the up position
@Grievance_Studies_Affair_2018
27 күн бұрын
@@JoeDirt00 Did you fix it yourself eventually?
@JoeDirt00
26 күн бұрын
@@Grievance_Studies_Affair_2018 nope had to have it sent off and upgraded I can send company
@AlbRotor
Жыл бұрын
can you tell me the 12 pinout of the Gear Selector ??
@darrenroberts7156
Жыл бұрын
You my friend are a genius. It got me out of a very sticky situation and had it repaired for a small cost
@reed-broughkids
Жыл бұрын
Did you get the solenoid replaced?
@anthonyoneill2993
Жыл бұрын
This saved me a night stranded in the Scottish highlands -14 can’t thanks you enough
@casandrazamarripa
Жыл бұрын
Life saver!! My hours at work have been cut and all of my bills are due including yearly property taxes AND It’s Christmas!!! This broke on me the morning I was going Christmas shopping for my 7 year old. Thank you so much, you have no idea how much this saved me until I can afford a new piece.
@ebbonfly
Жыл бұрын
Great tip, don't replace the unit there's a company that repairs these and upgrades the electronics so it doesn't happen again, costs a lot less than a new one too.
@mianaseer812
Жыл бұрын
What is the name of the company?
@valentino3129
Жыл бұрын
What’s the company
@DefNotMyBurner
Жыл бұрын
@@mianaseer812ECTTesting or something like that. You send your selector in, you get it back in a couple days, and if the selector wasn’t the problem then you get your money back minus shipping and testing fee
@tsidisobojabotseha1315
Жыл бұрын
Howzit my Evoque was able to move to all of the mode except park what could be the fault now
@nizarkailani6463
2 жыл бұрын
So I took mine out of a Range Rover 5.0 Super-Charged Long Wheel Base, I tested the park solenoid and it works with a 9v battery, I am no sure what the problem is when it is hooked to the car the knob wont turn however after i did this fix in your video the shifter works fine, except it will lock every chance it gets I have to always manually remove it
@TheRussBroom
Жыл бұрын
It’s usually a circuit board failure, rather than the solenoid. They last forever.
@dendirty
2 жыл бұрын
Powertune can fix these for good
@nizarkailani6463
2 жыл бұрын
dO TELL PLEASE
@DJWenlowe
2 жыл бұрын
You Sir, are a genius, thank you for sharing this 👍👍
@collinthompson3663
2 жыл бұрын
Brill video helped me as stuck for 6 hrs in middle of nowhere and got home on it in my lR4 2014 model 😀 👍
@princealaddin5097
2 жыл бұрын
Great video
@option1stlife388
2 жыл бұрын
I can't seem to figure out how to get all the plastic off so I can get to the unit. 2016 Land Rover LR4
@mounirelabdi
2 жыл бұрын
kzitem.info/news/bejne/1HyByayLhn2QenY
@rogervasquez8729
2 жыл бұрын
How do you remove the unit from a 2015 LR4
@Pakistanzindabad-tn6cx
2 жыл бұрын
Good job i like it
@alexgentile1252
2 жыл бұрын
Did it this on my Jaguar XF and this fix works great ! But the electric Handbrake doesn't work if the Shiftlock is locked !
@JoeDirt00
Жыл бұрын
What year jaguar? And how did you remove it ?
@alexgentile1252
Жыл бұрын
@@JoeDirt00 hi ... the handbrake problem will be fixed after a restart. My XF was 2009. You need to remove a lot. kzitem.info/news/bejne/zqiBs2GuioljYKQ
@anthonyserrato2928
2 жыл бұрын
Do you need to reprogram a used unit?
@GeminiAutoWorks
2 жыл бұрын
No it should work but might bring up a warning light. I have fitted brand new ones and they worked without coding but it will have a warning light till it’s coded
@HoustonisFire
Жыл бұрын
@@GeminiAutoWorks hello what tool you suggest to code it or is my only option taking it to a shop? Thanks in advance
@ariv8585
Жыл бұрын
@@HoustonisFire Did you have to take yours to the shop to get coded?
@HoustonisFire
Жыл бұрын
@@ariv8585 I haven’t replace it yet. I only did this quick fix. I’m shopping around for the part. I was told by someone else that it doesn’t need to be programmed tho. They said once you replace it, it should work fine
@ariv8585
Жыл бұрын
@@HoustonisFire I had the replacement part (eBay $217) on hand when I asked the question. I’m generally impatient so I immediately began working on my car, only took 15 minutes. No fault code, but I did disconnect the battery!!
Пікірлер