The non-removable style is a fixed orifice, not a metered weight with a spring. Clean the valve cover and orifice, and that's about it. If you heat the new style, I've seen a TY'er remove it.
@jlrockafella
2 ай бұрын
Junkyard solves all issues, enough said🙄
@LA_Commander
4 ай бұрын
If you're going to replace the valve cover, don't go with a used one. Get the updated model that GM came out with just a couple of years ago. Dorman has a version for less than a hundred bucks. This corrects the design defect in the PCV baffle which caused oil to leak out thru the PCV valve which caused oil consumption. This updated valve cover is the way to go. Kills two birds with one stone. You get a brand new PCV valve and an updated valve cover which prevents the oil consumption.
@ethans6.0
2 ай бұрын
The updated cover for the same year or newer year?
@Ppsswag
5 ай бұрын
Valve covers on Amazon for it 78$ for both covers
@polapop4913
7 ай бұрын
Its not a valve its an open orifice
@light_work_king
7 ай бұрын
My pcv vavle it's not removable but how can I test it to see if it's bad
@raulportillo7492
8 ай бұрын
Gracias eso me va a ayudar
@damonconnell4193
9 ай бұрын
That part is $80 American
@targetedtyranny4661
9 ай бұрын
I have an 03 suburban 5.3 ,it's made onto to valve cover,so apparently it's some are,some aren't
@hidinfrombiden1734
7 ай бұрын
The way people junkyard swap parts to save a couple dollars, you never can tell with pre-owned vehicles.
@justinstephens817
10 ай бұрын
Don't have to swap out the valve cover just need to man tf up and pull the pcv valve out GM GENUINE 12567915 is the part number its a tight fit but it does come out and no ones even considering paying hundreds for a flipping valve cover when there a bazillion aftermarket covers for an LS engine family . Videos like this clog up youtube with misinformation because the person making it is clueless .
@Celestial_Being666
5 ай бұрын
The pcv is built into the valve on 04-06 vortec 5.3 liter engines
@justinstephens817
5 ай бұрын
@@Celestial_Being666 its a press fit the valve is steel the cover cast aluminum it will come out
@redstonekid4451
3 ай бұрын
I have an 05 Tahoe. It’s pressed in, and yes they are just an open part now. Got the replacement from rock auto. I took the valve cover off and hit it off from the inside cover. Came out and new one in
@mickdundee1601
11 ай бұрын
Slow ASF!
@emiliogarcia316
Жыл бұрын
Tengo una tahoe 2004 y no puedo cambiar la balvuvula tendría qe cambiar la tapadera completa no pude le erle su traductor se quita muy rrapido
@sagittariusmx3101
9 ай бұрын
Según de ese año vienen como sellados y para poder quitar tienes que quitar todo el cover y hacerle un hoyo con taladro para poder quitar la válvula vieja yo digo q mejor cambiar toda la tapadera sería mejor
@emiliogarcia316
9 ай бұрын
@@sagittariusmx3101 ok muchas gracias muy amable 👍 bendiciones
@isaacruiz6832
Жыл бұрын
So I can just take a valve cover with the removable pcv valve off an 03 5.3 and put it on my 04 cateye?
@ethans6.0
2 ай бұрын
I guess as long as you already have a 5.3, I wish he set them side by side
@DannyVillagrana
Жыл бұрын
Ty
@jayomega29
Жыл бұрын
Thanks bro
@kyvian251
Жыл бұрын
Would a bad pcv valve cause my throttle body to gum up? I’m gonna clean it out with carburetor cleaned and a toothbrush for the second time tomorrow.
@rschlagle3421
Жыл бұрын
Did you ever find out if would cause it to
@Teresa-zu6hv
Жыл бұрын
Gracias mi amigo Muy buen video
@FISHINNATE
Жыл бұрын
Lol the cover is $60-$128.
@johntrain8563
Жыл бұрын
i have an ‘06 sierra K1500 4.8L. my valve cover looks like the cateye in the video. Does the pcv valve come out or not?? I cant get it to budge. btw, all the parts stores say it pops out, including rock auto.
@castleclubclipz
Жыл бұрын
Nope. All 2004-2006 Vortec engines have the PCV valves built into the valve cover, this includes all Tahoe, Suburban, Yukon, Sierra, Silverado and Escalade. You need to replace the valve cover if you want a new PCV... OR take off the cover, drill out the old PCV, and install a rubber PCV grommet from 99-03, along with a fresh PCV valve.
@Shanonmcnab576
4 ай бұрын
@@castleclubclipzif that’s the case why are they just selling the part #Gm 12567915 if it’s part of the casting of the valve cover.
@thenotsojollyrancher-akate9516
Жыл бұрын
Not a part of it. I took one out today. Terribly hard but got to use sharp screwdriver and hammer and work it out like a bearing cover. It isn’t a valve though, just a small hole through fitting. Mine was completely clogged. I drilled it out. Not sending that crap into my engine anymore. Complete failure by Gm. Lot of gas, brake cleaner, carburetor cleaner and air to get all the gunk from behind that plate, but it can be done.
@2Jeezuzisreal
11 ай бұрын
Can you tell what size engine you had and what year was
@navajorezathlete1202
Жыл бұрын
That sucks. I gotta buy a new valve cover
@chrisg1364
Жыл бұрын
Would a bad pcv valve cause oil leak down back side of motor?
@alectownsend1063
Жыл бұрын
Following
@ishmaelortega6427
Жыл бұрын
Same
@mcguiresflooring1276
Жыл бұрын
Yes it will fixing mine now .
@cardinallandscaping5921
7 ай бұрын
Maybe maybe not, I had an oil leak from the sending unit of an 2004 5.3L it was the first sign of my problems occurring after the second time it blew out. Then it was the valve cover gaskets. Now I have to fix a lot more than the Pcv valve now. 🤦♂️
@cardinallandscaping5921
7 ай бұрын
Not to my knowledge though, not that I have seen.
@dylanmitchell2097
2 жыл бұрын
80$ To replace that cover, your parts store is raping you
@caseypalmreuter2483
2 жыл бұрын
I think it's f****** stupid that they made the PVC valve into the valve cover
@whistlinframer6812
2 жыл бұрын
Yeah I know right? The valve itself isn’t even $8 but they’re selling the whole valve cover assembly for $350 because it’s integrated
@RMartin631
2 жыл бұрын
Why does it take you over 4 minutes just to say swap out the valve cover. Get to the point already. Nothing else matters.
@princeansoni
4 ай бұрын
honeslty
@migmogg8087
2 жыл бұрын
Nice
@koanytone
2 жыл бұрын
I was trouble shooting my non oil pressure in my Denali after a few mistrials this is my next thing and had the same issue of not being able to remove the pcv valve. Luckily I have a LS engine that I’ve been taking about to get a better I’m understanding of engines but it has the removable pcv valve. So thankful for seeing this before I really even started to dig into getting the one off that isn’t removable. Thx!
@2Jeezuzisreal
10 ай бұрын
So what did you do
@MPulicci78
2 жыл бұрын
Well I’m trying to remove that part too… guess what…. That’s not the PCV valve.. it’s just a breather…. And I got it out… pryed it out with a short screwdriver… the PCV valve is somewhere else
@shadymaint1
2 жыл бұрын
It has a metered orifice instead of a PCV.
@whistlinframer6812
2 жыл бұрын
What year and Engine?
@albertquintero5412
2 жыл бұрын
I just need rubber hose 😐 my tube is fine idk where can I get it
@cjharris5664
2 жыл бұрын
Badass video.... 👍
@wesleyburns4566
2 жыл бұрын
Great video learned something new thanks.
@kylosolo8815
2 жыл бұрын
I have an 03 avalanche 5.3 is it the same as the 03 your talking about? My 03 is a cat eye
@whistlinframer6812
2 жыл бұрын
I’m going to say that you should have a removable pcv valve
@kylosolo8815
2 жыл бұрын
@@whistlinframer6812 ok thanks much appreciated
@panchounger5148
2 жыл бұрын
This guy doesn't need ladder for repair the engine
Пікірлер