Could you be more clear on what wires go to what wires?
@ratted55belair16
2 күн бұрын
@joeclopton2728 i can't anymore as this is an old video and I left the hobby a while ago, I apologize.
@takenotez808
7 ай бұрын
Do I need to bind even if my receivers came with the remote?
@167switchback
8 ай бұрын
Thank you man it work 4 me 😊
@chequeredflagracing
11 ай бұрын
Just saved me trashing a second user FGR4S that I'd bought. Pays to look on youtube😊
@RacingMeyer8
Жыл бұрын
Signal, I'm assuming, is at the top of the receiver.
@mr.itchroot6304
Жыл бұрын
Lol just got the same receiver 4 my nb4 and couldn't 4 the life of me get it 2 bind lol, till I found this great video Bro thank you thank u I was mad lol did the same from ur video, and boom worked like a charm Thank u🙏🙏🙏🙏👍👍👍
@fabiomariotti_ps
Жыл бұрын
I eventualy got it bound, just I didnt get the bound mesage from the controler :( in case just switch off both, and restart. Mine was bound.
@rpcclo
Жыл бұрын
thank you - this was a great video
@lil_depressed3459
Жыл бұрын
What if I don’t have the bind plug what can I do and where can I order?
@ratted55belair16
Жыл бұрын
You can get a bind plug almost anywhere.... standard part 😁
@sanantonionolimitrcracing
Жыл бұрын
THANKS BRO I WAS ABOUT TO THROW THEM AWAY
@terrykcook
Жыл бұрын
Thank you!
@ericwilson7949
Жыл бұрын
Dude youre a life saver! Who the hell would have figured that out with out a proper manual
@Johney_Nomadic888
2 жыл бұрын
Dude, I struggled so hard to get my Fly Sky Noble NB4 bound to my Kyosho MP9e Evo w/ the FGr4S receiver. It was a total pain before I found this video. There are some changes for the newest Noble NB4, in 2022, however. I want fellow enthusiasts to know what they are because it could throw you for a loop. I hope y'all take a look at the comments because I'm going to list them here: Once you're done with the first steps, I.e., when the bind plug is facing horizontally in the receiver, it's time to power off and insert the bind plug in the 'correct way,' as the video implies. Power the receiver & ESC on again (leaving the transmitter on), and go back to the 'Receiver Set' category where the poster scrolls to the top, (you're still in the 'RX Set' section at that point). He touches 'Bind With Receiver,' but the problem is that if you have the newer model (here in 2022, aka, the apocalypse), that choice has a different heading. Rather than the bind with receiver option, it says "Bind Set." It's the same thing as bind with receiver, FYI. I thought that might be a good addition for the RC world to know. This video is awesome, thank you! Kudos to you for getting us up and running, literally, (pardon the pun), as well as filming one-handed. You're an RC NINJA and you saved my butt because I've got races coming up and need to get this thing dialed in. Thank you thank you thank you! 😜 : DOES ANYONE HAVE INFORMATION ON HOW TO CUSTOMIZE THE NOBLE NB4 WITH GRAPHICS, DECALS, PAINT JOB, OR WHATEVER IT IS THAT PEOPLE ONLINE HAVE BEEN RAVING ABOUT? 🤷♂
@markmathews5117
2 жыл бұрын
Great help. Thanks.
@keithmcdaniel2871
2 жыл бұрын
thank you so much
@Ittybittythetwofacedkitty
2 жыл бұрын
Thank you. I thought I bought 3 counterfeit junk receivers, but with your help I succeeded in binding them!
@rdrc4586
2 жыл бұрын
😀
@mohd.ramzirahimih6518
2 жыл бұрын
This is very helpful.. No wonder i couldn't bind with a new receiver.. You needed to update it and plug the bind plug in a different way.. Thanks! This is very helpful
@TheBeladog
2 жыл бұрын
Bad ass man. Saved me some serious time and frustration. Thank you
@mattr2533
2 жыл бұрын
Thank you!!!!
@jimbrown3781
2 жыл бұрын
I have a FGr4S receiver. It will bind with Firmware 2.0.85 in the radio. It won't bind with Version 2.0.93. Several racers that use the NB4 has tried to bind the receiver in firmware 2.0.93. They are at a loss also. I have purchased 8 of the FGr4S. This is the only one that won't work with version 2.0.93. Do you have any ideas what to do?
@ratted55belair16
2 жыл бұрын
Unfortunately I don't and have since left the RC world... I no longer stayed up to date with the device. I apologize 😔
@alboneMS3
2 жыл бұрын
Thanks this was very helpful!
@joshchatwin8569
2 жыл бұрын
Is this the same with the none antenna one
@Pswans509
2 жыл бұрын
This is my favorite video. Clear & fast instructions. I don’t even try to remember because I have your video thanks!
@biggsdarklighter4586
3 жыл бұрын
I struggled for hours last night trying to bind my receivers after a firmware update! This should do the trick, thank you!
@perez82i
3 жыл бұрын
Thanks for the helpful video
@hazrinibrahim2887
3 жыл бұрын
Mannnnnn. U are my heroioooooo
@MrElDiablo409
3 жыл бұрын
Thank you! Clear instructions.
@NicholasApplegate
3 жыл бұрын
Perfect! Works same on FGr4S (except bund plug will be between bind and ch4). Thank you very much!!!
@rcerock8200
3 жыл бұрын
Bro your the man
@EmilWilkensRC
3 жыл бұрын
Thanks for sharing !!!!
@Wilson-nx2nl
3 жыл бұрын
Thank you very much!!!😊
@willys8994
3 жыл бұрын
If anyone is having issues binding or having it stay bound after powering back on, even after updating the frequency and receiver, MAKE SURE YOU DONT ALSO HAVE A SERVO PLUGGED INTO RECEIVER while doing it all like I did. The manual doesn’t state that. After I figured that out it works perfectly.
@smnkm4ehfer
3 жыл бұрын
My radio works fine on all of my receivers, except for some reason channel 3 on my FGr4 doesn't function. I can hook lights or winch controller to channel 4 and everything works perfectly, and on my FGr4s channel 3 works perfectly. In fact on my FGr4, channel 3 doesn't even show up on the active channel inputs on the home screen. Any ideas?
@dion7470
3 жыл бұрын
Hello can you bind two different reciever for two different rc cars?
@choke666
4 жыл бұрын
DUDE BRO, A MILLION MF THANKYOU'S! YOU DONT EVEN KNO... 1 WHY DONT THEY TELL YOU THIS? AND 2 HOW YOU FIGGER IT OUT?! AND 3 THANKYOU MUCH!!!
@ratted55belair16
4 жыл бұрын
A lot of patience 😂😂😂😂😂
@DimiS1978
4 жыл бұрын
Worked like a charm, thanks man!
@ratted55belair16
4 жыл бұрын
Glad I could help!
@user-dz2jv4in5z
4 жыл бұрын
Don't try to do it with the transmitter and receiver that close together.....
@ratted55belair16
4 жыл бұрын
Never a single issue
@user-dz2jv4in5z
4 жыл бұрын
@@ratted55belair16 Yeah but that's often the cause of binding issues.
@BIGGBULLxxx
4 жыл бұрын
Hi mine will not bind at all I have two of the fgr4 v2 receivers and when I do this it says please connect Rx first...please help. Thanks
@ratted55belair16
4 жыл бұрын
I ran across that as well... you need to go to flyskys website in the manual and update the firmware on the radio... as the reciever has newer firmware than the radio and you cant go backwards on the reciever. Hope that helps!
@BIGGBULLxxx
4 жыл бұрын
@@ratted55belair16 I did do that and then the rx still didn't not want to bind I tried everything and finally I tried choosing a model and giving it a name and then I tried binding it and it took and then I updated the rx and it took and then I re-binded it and it took.👍
@BIGGBULLxxx
4 жыл бұрын
Thanks who taught you this?
@ratted55belair16
4 жыл бұрын
Trial and error 🤣🤣🤣
@BIGGBULLxxx
4 жыл бұрын
@@ratted55belair16 ...cool master mind😇
@hickslightfoot
4 жыл бұрын
Thank you sooooo much for this...
@ratted55belair16
4 жыл бұрын
No worries... it's a great radio... that's why u did it :) but I'm totally glad it helped!
@nikolayyordanov6651
4 жыл бұрын
Very usefull video dude , you saved me a lots of headache ! I sucessfuly bind them , but the motor doesn't want to run 🤷♂️
@nevermore9155
4 жыл бұрын
thank you
@francisalerte7284
5 жыл бұрын
Nice vid thanks ! I dont know if you master this radio but I have an issue with the crawler mode. Can you help me out setup it properly ? Also van I increase the number of channels on it ? I need 6 minimum, thanks bud !
@aymanmohamdy9625
4 жыл бұрын
For increasing the channels there's a new receiver frg4p
@b00___
5 жыл бұрын
my radio says “connect with a receiver first” when I press update receiver.
@httanaadnan
5 жыл бұрын
how can i set up the safety mode ? pls help me
@ratted55belair16
4 жыл бұрын
I'm sorry I didnt get back to you sooner... I'm hoping by now you figured it out...
@RCPhysics
5 жыл бұрын
Great video!
@NiekkieNick
5 жыл бұрын
Do you recommend the Flysky Noble 4 over the Sanwa MT-44?
@ratted55belair16
5 жыл бұрын
Personally I have no experience with Sanwa.... so unfortunately I cant help you there.
@Dartheomus
5 жыл бұрын
I'm trying to find info about the fgr4 vs. fgr4s. The S has an internal antenna... does this affect the range?
@ratted55belair16
5 жыл бұрын
So far in my experience, I've lost visual before I lost signal
@Dartheomus
5 жыл бұрын
@@ratted55belair16 Awesome! That's what I wanted to hear!
@aymanmohamdy9625
4 жыл бұрын
The fgr4 has longer range ... if you entered the flysky you'll find this info
@UKMitchy
5 жыл бұрын
Tried this and no luck. The update bar on tx just sits at 0%. what ever I do.
@ShawnTheSilentLurkerKerr
5 жыл бұрын
Same here
@ShawnTheSilentLurkerKerr
5 жыл бұрын
Not sure if you got your's to bind yet, but I just figured mine out. system settings radio frequency setup update rf Then I updated the receiver and bound it following the steps in the video.
@UKMitchy
5 жыл бұрын
@@ShawnTheSilentLurkerKerr Yes I got mine to work. Took some researching, but found out about the how do do it the same way as you. I almost gave up, but glad I didn't.
@Rex_Stuph
4 жыл бұрын
@@ShawnTheSilentLurkerKerr You sir, are a legend. Thankyou.
Пікірлер