I have the same problem on my 09 i bought a used one from Amazon for $136 it made my truck worst
@81husker
3 ай бұрын
Hey Ned I need a passenger side mirror for my 2017 F250 lariat power fold power extend warning light mud light
@nedsgarage7307
3 ай бұрын
Good Morning 81hucker, I don't know really. For the mirror, my best guess would be local salvage yard. I've had good luck with them with rims and stuff in the past. We have one here in Worcester, Standard Auto, I have used. Also, I think you should call one first and make sure they have one of your trucks there. Then drive there and make sure the part is what you want. Especially since there are many different styles of mirrors - you will want it to match. Lightbulbs, online I use Rock Auto. Their website is easy to navigate. They might have your mirror too... Good luck with your projects. You will save big money doing it yourself. Especially if you can get a used mirror in good shape. Thanks for watching and commenting! Ned
@Ferral1000
4 ай бұрын
How did you access the two passanger side diff bolts i cant get to them did you go thru the tire wall.
@nedsgarage7307
4 ай бұрын
Good Morning Ferral1000. The passenger side were actually the easy ones. The ones on the top will be the hardest. All of them I started with a breaker bar and socket, then ratchet, then a gear wrench. For one of the bolts on top, I couldn't even fit the gear wrench and had to use a regular old 12 point box head wrench. Dropping the front differential is definitely the hardest part of the job. It took a whole Saturday. Spray bolts with penetrating oil and wire brush any exposed threads you can reach. On driver's side I needed to use a torch as well. Don't burn any wires. You can wrap them in foil to help protect them from the heat. Thank you for watching Ned's Garage! Ned
@Ferral1000
4 ай бұрын
@nedsgarage7307 when I re install the front differential what is the torque specs for the mounting bolts kind sir?
@nedsgarage7307
4 ай бұрын
Good Morning Ferral1000, I am sorry Sir. I do not have those specs. Ned
@Ferral1000
4 ай бұрын
@nedsgarage7307 what dod you torque yours to or do you remember?
@richbranson4656
5 ай бұрын
The drivers side 2 front differential bolts suck balls. Dont let his upbeat attitude toward life fool you. They suck....balls....used 3 different wrench based off how far they are out and proximity to oil pan.
@nedsgarage7307
3 ай бұрын
I can't argue with that richbranson4656. Well said. Thanks for watching and commenting. Ned
@DC-ep3bd
5 ай бұрын
Flywheel cover has a bolt on the driver side that is not accessible with a standard socket. There is a transmission mount bracket that restricts access to this bolt. How did you get this difficult to reach bolt out?
@nedsgarage7307
3 ай бұрын
I am sorry DC-ep3bd but I did not experience that issue. My flywheel cover bolts were all easily accessible. There must be something different on your truck. Sorry I couldn't help. Thank you for watching and commenting. Ned
@DC-ep3bd
3 ай бұрын
Thank you for the response. I was able to get the subject bolt in question out finally. It took a bit of finagling. Also, I did not need to jack the motor at all, oil pan came out with ease once the front diff was lowered. I have a 4x4 2012 Ram 1500 for reference. Thanks.
@nedsgarage7307
3 ай бұрын
NICE!! And Good Job! Can I assume you have a lift kit installed? Ned
@1DerekDaniel
6 ай бұрын
You’re very knowledgeable! I have a few questions - I didn’t see anywhere to send a message so I’m in hopes you’ll get a notification & see this! I have a Fisher plow & need some help. I watched several videos but you stood out to me - Thanks!
@nedsgarage7307
6 ай бұрын
Hello DubVDD, please feel free to post any questions here and I'll do my best. Thank you for the nice comments, and thank you for watching Ned's Garage.
@kurtreinhardt6789
8 ай бұрын
Thanks for sharing how you went about it
@nedsgarage7307
8 ай бұрын
Thank you Kurt, and thank you for watching Ned's Garage!
@SkittleEagle
9 ай бұрын
Best tutorial so far, I need to change my oil pan since shop refuses to take accountability for damaging it during motor swap.
@nedsgarage7307
9 ай бұрын
Just make sure to remove engine mounting bolt and don’t jack up any higher than you need to remove the pan. Keep an eye on fan
@SkittleEagle
9 ай бұрын
@@nedsgarage7307 I have only an efan so no problems there. Thank you for posting this video
@coryboyd7958
11 ай бұрын
U sound like a dang kindergartener
@jamessteere1240
Жыл бұрын
Thanks for making video!
@nedsgarage7307
Жыл бұрын
Thank you James! Ned
@dimensionexo.
Жыл бұрын
That;s okay - I'll hire someone *
@nedsgarage7307
Жыл бұрын
Thank you Dimenion Exo, and thanks for watching Ned's Garage!
@dimensionexo.
Жыл бұрын
@@nedsgarage7307 ✅
@ArcolaBridge
Жыл бұрын
Very strange to have a coating like that on an oil pan. I came here wondering if it's possible to see the oil pick up tube from the oil drain plug with an inspection camera?
@nedsgarage7307
Жыл бұрын
That is a great idea! Please let us know how it works out. Thank you for watching Ned's Garage!
@venomous_5936
Жыл бұрын
Thank you so much for this video and the previous one! Mines a 3.6 4x4 and needed to see a video. I read on the book and it said I had to do so much more things and I’m glad I don’t have to do all of that now thank you!
@nedsgarage7307
Жыл бұрын
Thank you venomous_5 and good luck with your project! Thanks for watching Ned's Garage.
@bryfay7518
Жыл бұрын
Nice of Ned to get back to you.
@ethanwatters8704
Жыл бұрын
Thanks for the solid tutorial.
@nedsgarage7307
Жыл бұрын
Thank you Ethan and Good Luck with your project!
@dougmcclintic
Жыл бұрын
Great video, very well done. Thank you for taking the time to film the process. This helps me so much. i liked and subscribed to see more videos.
@nedsgarage7307
Жыл бұрын
Thank you dougmcclintic and Thanks for Watching Ned's Garage!
@ofpersaverance
2 жыл бұрын
Awesome, this was helpful, thanks.
@nedsgarage7307
2 жыл бұрын
Thank you Kongfu! And thanks for watching Ned's Garage!
@johnnyv.salinas3745
2 жыл бұрын
Thanks for the info! Some How the plastic washer came out when I took it apart! Got the washer back in place, and now is working again. Thanks again.
@nedsgarage7307
2 жыл бұрын
Thank you Johnny! And thanks for watching Ned's Garage!
@luckylarz4269
2 жыл бұрын
Have the same pump and set up. Have an issue where the plow works fine and then all of a sudden it won't turn left anymore I hit left and it goes up. I replaced all the seals and filters everything I was told to and I cannot figure out why this keeps happening. Like I'll hook the plow up the night before a storm or whatever everything will work fine it'll lift angle left and go right No problem. Hopping at the next day to go plow and then either right off the bat or pretty soon after it will not turn left again for a period of time and then it'll snap back and start turning left again cannot figure it out then messing with this all season and it's driving me nuts sick of just throwing parts at it everybody's always like oh try this try that but I don't know figured maybe I'd ask you cuz you seem like you knew what you were doing. I was told that doing a full flush takes about 2.5-2.3/4 quarts of fluid. But it just barely took up like two quarts. Maybe I haven't bled it properly or didn't put enough fluid in it? I have no idea how much did your plow hold and how do you know when it's full? I've heard different things from different people about the level and what's considered full. I'm just throwing a hail Mary out there that maybe my issue is not enough fluid but I don't know what the problem is you know. Appreciate your video Thank you for the time you put in making it. If you do see this in your able to lend a hand or have some knowledge about my problem please let me know I'd appreciate it Thank you very much.
@daveodonnell4296
2 жыл бұрын
i'm guessing that somebody wanted to clean the engine before an oil change, and put in a non-approved cleaning additive like brake fluid or carb cleaner, and that loosened the paint. Also could have been a manufacturing flaw.
@nedsgarage7307
Жыл бұрын
Great point! And thanks for watching Ned's Garage!
@Zelaznogsiul-63
2 жыл бұрын
What about the oil pressure sensor, my oil pressure dropped and the the sensor was the problem.
@nedsgarage7307
2 жыл бұрын
Hello Luis, When the oil pressure sensor fails, it gives you a false report that your oil pressure is low. Oil pressure sensor failure is a very common occurrence and trust me, you would much rather have the sensor fail as it is a much easier repair than removing the oil pan from a 4x4 truck. You can test the oil pressure in the engine with an external gage to verify the sensor is working correctly. In this case, the oil pickup tube filter was blocked by the lining of the oil pan coming free and blocking the input to the pump. The oil pressure sensor correctly alerted me to the condition. Thank you for watching Ned’s Garage! And thank you for your excellent question! Ned
@Zelaznogsiul-63
2 жыл бұрын
@@nedsgarage7307 thank you for the reply, and have a Happy new year.
@jamesvillano5202
2 жыл бұрын
Don't know about you Ned, but I was always taught to never operate an air hammer without placing it against the "work". Over the years the spring has been know to fail and the chisel end becomes a projectile.
@ganjalfcreamcorn8438
5 ай бұрын
he was by himself in his house so no biggie. sometimes with the quick change chuck "dry firing" it can get the bits stuck and deform the chuck. but its his tool so who cares really lol. I appreciate the video man, its a super simple tool buts its good info to see. may help me one day. I thought mine was broken the other day and i realized the main collar/retainer cap thing was just loose. one twist and I was back in business. wasn't too bright about it because I worked for like 2 hours before i even addressed the problem, been a while since i used it and couldn't remember if it was always that way or not haha. The DeWalt air chisel is an absolute disgrace, don't ever buy it if you value your money or sanity. The 8 dollar ones from Walmart are legitimately better.
@chriscoco547
2 жыл бұрын
Ned, it would be helpful to me if you could list your parts Distributor. Thanks
@Logjam5
2 жыл бұрын
It was a good idea to show fastener location s after the necessary items where removed,instead of trying to film the process with poor lighting one handed. Good video. I have a 2006 Dakota 4x that requires the pan changed.
@nedsgarage7307
2 жыл бұрын
Thank you Log Jam and Good Luck with your project! Ned
@scottcushman1768
2 жыл бұрын
Love the info just work on the video from one tech to another. Make the video wider. Take care.
@nedsgarage7307
2 жыл бұрын
Thank you Scott. Will do. Ned
@josephfrazier5561
2 жыл бұрын
how do you recommend stabilizing the Differential to properly take out the bolts? and when you lift the motor, what are you using to hold it in place? i feel like the jack can possibly roll away which can be dangerous? Im currently doing my waterpump and timing chain on my 2013 5.7 and oil pan gasket as well. just looking for some pointers
@nedsgarage7307
2 жыл бұрын
Hello Joseph, I'm not the best resource for safety. The jack shouldn't roll back because it has the weight of the engine on it. I Also, make sure you use chock blocks and jack stands anytime you work under the truck. If you'd like to see a video on how I removed the oil pan kzitem.info/news/bejne/pW5m16JtsId1o44 Good luck with your project! Thanks for watching and for your comments! Ned
@jolemka8068
2 жыл бұрын
Great, thanks for sharing!
@alexbe32
3 жыл бұрын
Thank you! Great video, very helpful. I'm in the middle of the job right now, dropped the cross member and was figuring out how to lower the diff. Thanks to Ned - getting there)))
@nedsgarage7307
2 жыл бұрын
Thank you Alex Be! I am uploading a video on installation of the new pan right now. Maybe you might want to check it out. Thanks for watching and for your kind comments!
@jermioh
3 жыл бұрын
I would recommend not to Jack the engine by the the crank pulley. You’re putting all the weight of the engine on the crank shaft and it’s bearings
@nedsgarage7307
3 жыл бұрын
Thank you Jerferna I agree. I just don't have one. Thanks for watching! Ned
@nathangillmore8875
7 ай бұрын
Have you noticed any side effects from doing it this way? If you only raise it for the duration of time needed
@nathangillmore8875
7 ай бұрын
I'm planning on doing this soon but don't want to damage anything
@airratchetjockey7605
3 жыл бұрын
Turn your phone sideways (if you’re using a phone) so we get full screen next time.
@nedsgarage7307
3 жыл бұрын
Thank you AirRatchetJockey. And thanks for watching!
@nedsgarage7307
3 жыл бұрын
Welcome to my channel Ned's Garage! Please like & subscribe. Ned
Пікірлер